Видео

Thanks for watching and commenting👍👍

Thanks for the visit👍

@@tomw8655 thanks for watching and commenting .gives you a good feeling once it's done and you can enjoy shooting again👍👍

LK, Always wanted to Camo a rifle stock. My hunting consists mainly for Wood Pigeons and their eyes are so sharp they can detect colours and any movement. If you are not properly concealed, the minute you raise your rifle they are off like a bat out of hell.😂 The good part is that you can remove the Camo tape without damaging the finish on the wood stock.

@@airgunshootingandoutdoorch4260 I am used to regular grain fed barn pigeons those usually don't care much haha

@@LowkeyAirgunner Yea. Those are fat and lazy and accoustomed to having people around. There are about 200 of them hanging out in our nearby Walmart. People just keep feeding them and the multiply like Cockroaches. They also keep company with 100 or so Sea Gulls.

@@airgunshootingandoutdoorch4260 sounds like the perfect night job 😂

Thanks for watching and posting.👍👍

Same difference mon ami😊. I calculated the barrel drop and used the blue paper clip to fix the rear ring in place while I tightened the locking screws. Scope manufacturers never tell you how many click adjustments you can make before the erector tube starts to float. Imho this creates a problem for new airgunners when they first mount their scopes and try to zero them. Once accuracy goes out the door the newbie is left scratching his head. Is it the scope, the gun, the pellets or the human factor?? I've been down that road before😅 that's why I did the video Thanks for watching and commenting bud.👍👍💯

​@@airgunshootingandoutdoorch4260I had answered this with a fairly long comment but YT is playing hide and seek again so I quit haha

​@@airgunshootingandoutdoorch4260do you sell scopes

@@LowkeyAirgunner YT. DOING STRANGE THINGS. SENDING ME A LOT OF CRAP. RARELY GIVING ME NOTIFICATIONS FROM THE CHANNELS THAT I SUBSCRIBE TO. ALSO ONE OF MY BEST VIDEOS FLATLINED AFTER 4 DAYS. NO STRIKES AGAINST IT AND I CAN'T FIGURE OUT WHY. MAYBE YT DOESN'T LIKE CANADIAN RUclipsRS????????

Here are the part numbers: 10592......Assy. Puck 130--034...O--Ring Seal 357a 054...Seal Quad 38--130.....O Ring (valve Body ) 38--128...12gr CO2 cartridge Seal Hope this helps to get you up and shooting again. Thanks for watching and commenting👍👍

@@tracyfried4211 Turn of the captions to get the full picture. Thanks for watching and commenting.👍

Not sure what you said in that post but thanks for viewing &commenting👍

If you are located in the US and it is a Crosman product you can try Crosman Corp. It might be cheaper to buy a new one. If you are in Canada and you can get it to me i would be willing to try and repair it for you.

@@airgunshootingandoutdoorch4260 well I'm in the US unfortunately

@@airgunshootingandoutdoorch4260 can you tell me how I can get it there?

@@Xavie_roblox7 To Me or to Crosman??

@@Xavie_roblox7 Try sending it to Crosman in the USA. If you try sending it to Canada, Customs will confiscate it as there is no way for them to test it to ensure that it meets Canadian FPS standards.

Chendo I agree but the reality is that we live in a time where Corporations are outsourcing manufacturing to the lowest bidder. I have found that the seals coming from China are substandard to those produced in the west. I normally stick with Crosman products because of the availability of after market parts and assy. Diagrams. Thanks for watching and commenting

I got a 357 SIX from between 1983 and 1987, and after I replaced the seals, it works great. Better performance than a modern vigilante.

Now that you mention it, it does look like a beer keg😂. I think I will drink a beer when shooting them. Perhaps that will increase the accuracy 😂😅 Thanks for watching and commenting 👍👍

Yea, I know that's a problem. GO PRO GIVES YOU GOOD RESULTS OUTDOORS BUT NOT SO GOOD INDOORS.👍👍

It's a TEC FORCE 87, magnum Springer in .22 cal. The stock was really nice and I always remove the tape without damaging the original finish.Thanks for watching and commenting 👍👍

Lol!🤣. The idea was to show the % improvement not extreme accuracy. Bucking Betsy, my magnum Springer, needs at least 100 shots through the barrel before settling down. Remember the saying " don't rush the brush". Mea Culpa. Thanks for watching and commenting 👍👍

ruclips.net/video/X2ZOQj9t8H8/видео.htmlsi=BN6eHJesNXvmbHMh Seven, Check out the above video showing that seal being replaced. Thanks for watching and commenting 👍👍

Soak the seal in motor oil (I used 10W30) in any clean container. Thanks for watching and commenting 👍

That works for PCPs and Multi pumps. Springer's are more hold sensitive. You have given me an idea for a new video. I will do same test with a PCP or Multipump and compare the results. Thanks for watching and commenting 👍

Agencies Gravel Inc 5175 John Molson Quebec QC G1X 3X4 Canada Thanks for watching and commenting 👍

Is it leaking gas??

I have not shot it yet I am waiting on the co2

While you wait, you can soak the seal in some Transmission Stop. Leak for a couple of days. It will swell the seal and make it more supple. Also put a couple drops of Pengun oil on the tip of CO2 cartridge when inserting in the pistol. That will lubricate the internal seals in the valve assembly.

@@AngellaDeAbreu thank you so much for your help

Yea Bud! they are a menace. I used to love glass box fishing mainly because you could see them coming and pull up your line to avoid the mess they create. The larger ones would attack us when spear fishing. We learned to stay away from them when we are in the water 👍👍

Thanks for watching and commenting.👍👍

Armando, It is not hard to do. Just follow this video. ruclips.net/video/EObhx-1vbWQ/видео.html CROSMAN 38T REPLACING CO2 CARTRIDGE SEAL. If you have transmission Stop Leak, you can soak the old seal in it for a few days and that might help. If that doen not help then you have to change the seal.

Thanks for watching and commenting.👍👍

Thanks for watching and commenting👍👍

Thanks for watching and commenting 👍👍🇨🇦

thanks for watching and commenting👍👍💯

Thanks for watching and commenting.👍👍

Air soft guns that are imitation firearms require the special blaze orange marking. State and local authorities have separate rules and regulations regarding entering their state with air soft, paintball, etc guns.20 Jun 2023 Las pistolas de aire comprimido que son imitaciones de armas de fuego requieren una marca especial de color naranja brillante. Las autoridades estatales y locales tienen reglas y regulaciones separadas con respecto a ingresar a su estado con pistolas de aire comprimido, paintball, etc.20 de junio de 2023 Thanks for watching and commenting👍👍

THE PART IS CALLED SEAL END # 38-128. THE PRODUCT SKU # FROM GRAVEL INC. IS 116041 AGENCES GRAVEL INC 5175 JOHN MOLSON QUEBEC QC G1X 3X4 CANADA THANKS FOR WATCHING AND COMMENTING 👍👍

Thanks for watching and commenting👍👍

Thanks for watching and commenting👍👍

Lwk, It's the same seal on both guns. An easy fix that anyone can do. The velocity was lower than expected and I suspect that there are two reasons; 1) The basement was very cold..CO2 works best when the temp is above 80 degrees F 2) The CO2 cartridges are very old and the gas may have leaked out causing a pressure drop. I actually found one that was still sealed and completly empty Thanks for watching and commenting👍👍

LWK, This scope with the TAG reticle was designed for Firearms, shooting out to 600 yds. 26 clicks of elevation only moved the POI 1 inch @ 10 yds. Another 26 clicks moved it another inch 56 clicks was a complete rotation of the knob ( from the factory setting ) The first shot was 4 1/2 inches low of the Bull so my concern was that further major adjustments would cause the erector tube to float and blow any chance of accuracy. At that point I decided to call it a day and order a set of adjustable rings. once I receive and install them, I will attempt to Zero the scope again. Thanks for watchinf and commenting.👍👍💯