Видео

Bonsoir, Attention avant d'installer le filtre dans la carafe de ZeroWater, il faut passer le filtre sous l'eau tiède pendant 10 secondes.

Sounds like you really cannot afford this house or lifestyle.

Great video. The Sigma is a game changer. We live under a humongous oak. if I didn't have this cleaner, I'd give up on my pool.

If you were to travel overseas to another country, like Thailand. Which one would you feel most confident about? Just Curious.

This is amazing piece of creation. I had sensor based toilet from delta and went bad not even in a year. Touch wood , this is going good for more than 4+ yr and it worries me the next one will cripple me without this 😂

Anybody please. Is it safe to wash the second exausted ? Thanks

So, it removes the beneficial minerals, or I am missing something?

But, it doesn't filter lead

You two are dopes

Very helpful video for me. I have a similar idea but wasn't sure it would work and now I see that it will. Thank you.

Why does the guy in the blue shirt look so skeptical ? lol.

Why would you buy anything other than zero if the idea is to drink the best water.

Please help: I had the blinking light thinking my Moen needed new batteries. I replaced them and the water automatically turned on for a second when I plugged in the power cord and then shut off. (I tried manually turning on the water with the handle and no water comes out.) I tried unplugging and plugging back the data and power cords (data first then power letting it cycle and then reverse order when that didn't work); same thing; a few seconds after I plug in the power cord, the water turns on for a second and then stops and I can't manually turn on the water and the sensors won't respond. I called Moen's help desk and they said the data box likely needs to be replaced. I got a new data box from Moen, swapped it out and same problem. Water turns on for a second after I plug in the power cord then nothing. Any advice? I'm out of ideas. Thank you in advance!

They should have cleaned of the 2 metal probes throughly on the PPM tester before testing the water each and every time! Just wiping tester housing is not cleaning the 2 metal probes off at all!!!

So this was 5 years ago why hasn't zero done better, Brita is rubbish compared to zero, so why is zero so slow.

Thanks for posting this! My handyman told me to remove the faucet handle to replace the batteries. Luckily I looked at your video!!

I have one an can’t get the cold water to turn off now

Our water here from the tap is 246 p.p.m. I use zero water, then use tap water combo, and I usually have about 125 p.p.m. Works great.

thank you!

Excellent

Big help for me!!!

You did not run the zero filter under the water faucet for 30 seconds, I just got my Zero filter, I also have Walmart bottled water it registered 19, I in Kentucky my meter for Louisville water was 162 run it thru the ZERO IT SAIDS 000, ours comes from the Ohio River, with what happened in PALESTINE OHIO I ORDERED MINE from Walmart, IT WAS ON BACK ORDER FOR 3 DAYS, was scheduled to be here March 1, woo hoo got 2/21/2023, it way early

A very informative review, thank you. One question: it appears that the sole control to change the water temperature is to manually adjust the handle. If that's true, how much does that discount the value of the touchless option? For example, when washing dishes by hand, I adjust water temp often. It seems like the more one grasps the handle to manually adjust the temp on a "touchless" faucet, the less value the sensors provide. Is this your experience?

Perfect 🤩

I made a Zero clearance ages ago but the fact I don't have a riving knife scares the crap outa me bro,, I find myself moving to the side constantly and not being lined up right behind the cut which probably causes more issues too.. LMAO.. I also need to build a new fence now too. I brought the Laptop out to my shop. I need to stop watching now and get on with my work.. These videos are brilliant for looking back. I can stop & start anytime I need to.. Thanks again man

I hear that saying all the time that u never get perfection in woodworking.. IS it true that a belt system is always better than the blade hooked up direct to the motor?? So how does it work bro? Is the blade moved by the belt and pulley system or what? I'm really interested in building some tools using my own 2ndhand motors.. I would love to build a DISC & BELT SANDER COMBINATION with all the bits and bobs.. Have u ever built something like that bro?? I love the Table saw videos. I am going to start changing my table saw top now. It's not level at all and it's cheap as heck man. I bought a brand new cheap saw for 160 euros but it wasn't worth the money I paid for it. Now I wanna change the top. The mitre slots are too small and I cannot find a mitre Gauge to fit it. It's too much work tbh so I', going to change the whole top now, router out some slots for Aluminium tracks for a nice Mitre Gauge I got from CHINA. It's a really nice one that was reviewed on @HOOKED ON WOOD channel.. U should check his videos out on tools from China. He doesn't review shit. He will only pick the best tools and he will not give a good rating to bad tools even if he picked them in the first place to review. Great channel and content my bro. Looking forward to the next lotta vids in this serious.. Now I'm off out to my shop to begin my table top change and complete overhaul.. I would like to have a table like yours one day but not right now anyways.. I will be buying an Axminster Table saw with the cast iron table top this year but that is months away. Gotta save that 5 grand 1st. That's for the saw and a proper Bandsaw to go along with it,, Might be Xmas by the time I get them but it'll be well worth the wait man,, Take it easy

Hey again bro.. I'm getting some brilliant ideas here so thanks very much.. It's very much appreciated to have videos like these o call upon when I'm working on something. I get some really nice ideas from them.. U give us a lotta great ways to build stuff but my brain sees something I like doing a different way so I have a quick look at my way and if it works I run with it bro. Thanks again my friend.. Really enjoying the channel.. I respect u guys for having the guts to put yourselves out there like this. I'm nowhere near confident enough right now. I would love to but not just yet. I'll wait til I am more technically proficient

Bro I love this build.. I' m in IRELAND and it's very hard to get my hands on a good 2ndhand saw with a Cast Iron table. I could get one from Germany but the cost is massive to get it shipped and all that. I don't drive so I'm stuck ATM. I think I need to get driving soon and get my own Van so I can travel to the UK and Europe to collect one myself.. Love this video bro.. I'm relatively new to woodworking and I really need to do some classes on the real basics of this field to have a better grounding bcos I love doing it.. I am just sub'd to the channel now and will be looking out for more great videos like this.. Take it easy man and HAPPY NEW YEAR to u and family..

Definitely I will not waste my hard earned money on this faucet. Not even for free. Not even if you paid me to have it 😣

bromides and other carcinogens are not dissolvable and can't be measure by TDS

ZeroWater Filter is only good for topping up bottled water if you drink it without any minerals in it it can lead to loss of minerals within your body for example do this test add 0 water to any water that has minerals in it such as bottled water or tap water you will see the numbers go down because you've added zero water so adding zero water to your body the numbers of the minerals in your body will go down also that's all folks goodbye..

Hey, guy, I had no idea you were doing woodworking videos in another lifetime. I encourage anyone who reads this to check out the Two Bit da Vinci channel for a long line of excellent, thoughtful, professional quality carbon-free energy videos.

Nice information and testing guys I just purchased one because of your review Thanks Guys

OMG didnt they say that will do a duble test with two diffrent device ? so what happend with the yellow one?

Why can't they make the system in glass? You are still drinking plastics! Does it take chlorine out?

It’s unfortunate that you don’t mention all of the plastic bottles that you will also keep out of the environment besides getting great clean water

You can't compare dye contamination to particulate or other chemical contamination. Dye becomes solution, whereas other contaminants have mass and can be physically filtered.

As you mentionned running a 2000W pump most of the day is not the way to go, variable speed pump running fast for an hour then slowest speed throughout the rest of the day to filter the pool water twice in a day.. you’ll have fun doing the math 😉the robot is nice too but it’s main purpose is to scrub walls and pool floor for algae and deposits..also that cartridge filter should be replaced with a sand filter, backwash once a week and you would have the perfect setup

what is the modeling app name?

still overpriced filters. yes they remove alot but that also includes essential minerals. turns the water into dead water. like distilled water. its still good but filters cost way too darn much.

Zero water is a very expensive choice in Phoenix. Used 2 filters neither lasted 1 month.

Very nice build! What wood was used for the outfeed table?

I'm a home canner, and my canned goods taste so much better after using this filtered water inside my jars. I can't tell you if they last longer, but the taste is so good, I don't can my veggies with salt so, and then the jams, I should have done this long ago

Tip- To save money & prolong the life of your filters. Use a good, inexpensive, long lasting water filter & pitcher like Waterdrop first. Then pour that 1st filtered water into your Zero Water pitcher. Waterdrop, the one I use, does the initial heavy work. Imo Britta & some others are rubbish. Epic Water or Zero Water filters then refine that water, taking out nasties like fluoride etc without getting clogged up nearly as fast.

Thank you sir! Wish more people did this very hard for anyone to show where they made mistakes especially with money involved. On top of you doing everything you said at the end of the video as well! Congratulations on getting married way to kickass on a sweet kitchen ✊🏾

My tap water new San Diego is almost 500ppm. Zerowater rocks!

Thank you so much for this video! The information was wonderful! As I just recently bought this product after using the "industry standard" (hehe) for so long, I am super thankful for this. The additional information about how they recycle their old filters is amazing! I am going to to check out their website now. Thank you again!

Phosphates often mean an outside source is contaminating the pool, like if you have a well for yard sprinklers which happen to have a high phosphate level. As for saving money, electricity usage in pumping in pipes is proportial to the speed of the pump cubed. Most algae is in the water, and should get filtered by the pool filtering system. Get a variable speed pump, only run it at a moderately high speed an hour or two a day (to run the suction based bottom cleaner) then at half or less that speed (where it draws 1/8th the power). In my case I use a much smaller speed that turns over the water about once a day, and uses a small fraction of the original electricity. You still need to filter the water as well as clean the walls, so adjusting pump speed will still save a lot of money. Plus they are quiet.

good job. thanks for sharing

Question what about creekwater