Видео

Can confirm it works just bake my 2080ti it was artifacting no longer is now seems to be working so far if anything changes will update lol

Because it only has one slot on the front, then I can't insert the front panel of the Sound Blaster Audigy 2 Zs, but I can insert the sound card itself.

I would possibly buy it in the foreseeable future when I'm planning to build a Windows '95 or Windows '98 gaming PC. I want to focus on getting a Rosewill Stryker M to build a Windows XP gaming PC.

Hello do you have link for the battery replacement for this laptop?

I have this same laptop samsung p580 but different processor i5 m560, can i upgrade the processor of this laptop?

So, 190 degrees centigrade for 11 mins.. right? Not 370 fahrenheit I assume

OCCT not a very good test for a graphics card. Better off with Furmark.

Not a real good idea long term. It’s a risky reflow at best. It is not safe at all as you end up reflowing everything on the board.

The mic doesn't sound very good.

terrible case with horrible air flow

Hi, there are 2 slots only for RAM right?

2 deck version does fine. AA batteries x 4.

A while ago I fixed somes gpu with the oven method. Now, i just bought a 2080ti with the same problem and i'll give it a try. Thanks for your video! I was only searching for the temps in the oven and your video is precisely everything i needed! Will update my comment tomorrow if that cooking was a succes! btw, 3 of my vrams have some brownish color on the top.. So if that doesn't work i'll probably buy some Samsung K4Z80325BC-HC14 chips and try to reball it. Oof! GPU's are like TVs, more its expensive, more they will break by thermal stress.

hi how can i enable the 7.1?

Would this work for a 2080ti not not allowing pc to boot?

AMD fan......lol stupid design

Does this headset have surround sound for PS4 like it states? I ask because I thought any headsets that use 3.5mm jack can't provide surround sound and only give sound in one ear. Are these different or doni need to buy the USB version instead of the 3.5? Any feedback would really be appreciated because I'm looking to buy these

It dosen't work on console pls help🙏

Hi. I'm building a shuffler out of Lego. I had the same issues with my construction: some times it did not feed. I found a tiny gap between two bricks above the feeding roller. There a card was slipping into the gap some times and thereby keeping the whole stack from falling on the feeding roll. Check your machine for burs and gaps above the feeding roller. At this price I'm shure there are plenty :)

I just tried to bake mine.. no success. I think mine blew out a chip or something . It's really dead

Just bought it with 26$ totally worth it

👍😍🎉

Well my silly ass couldn't figure out how to get the thing out of its box in the first place, so thanks for helping with that 😅

Thank you so much for this video. My RMA'd card started blackscreen/artifacting again yesterday so i figured i'd try to bake it since no warranty anymore. I disassembled it and put in the oven like you suggested and now it's back up and running better than before ! ( 2000pts gain in Furmark!) And i've built a support bracket to prevent sagging and thus solder breakup.

I have a question, do I have to use the extra microphone cable if I want to use it or can I just use the direct cable from the headphones? It is about the WOT game

Just bought the same board. I'm disappointed in the fan header locations. Very poor design.

Lekker man

Really want to thank you and appreciate today i baked my rtx 2080 and it came back to life from dead

The rog delta is too loud omg, i have to stay on the volume at 15%........ i don't get why, if someone has a fix pls help me... it's too strong

How much price on this headset

NUBWO N7 Headset Gaming Headset

for old ryzen cpu likze 5 3600 (zen2) you need to: Stable DRAM. • Disabled Curve Optimizer (in BIOS). PBO - no matter. • Manual CPU LLC (Load Line Calibration). ASUS - 3, MSI - 4, ASRock - 2, GIGABYTE - High. You also have every right to use whichever mode you like. • CPU Voltage - Auto (in BIOS). Offset is forbidden. • Windows 10 build 2004 or newer. • Power plan - Balanced (tip). • Some monitoring programs can cause problems. Also programs to control RGB, such as iCUE, can also cause problems. Tip - keep your applications up to date. • Use the most actual version of the chipset drivers. • Do not try to run 2 programs at the same time that have the ability to overclock the processor. Also I noticed, you add a nice cooler on ram "Arctic RC Pro", strong cpu cooler, remove tons of unnecessary backround apps, and tighten ram clocks with clock tuner or yourself. You might increase performance up 1000 pts. Ryzen 3600x might work very close to 4000 even with bronze. Ram cooler , PBO turning off also gives lots of boost, with manual load line calibration. for ryzen 7 or 9, hydra software is usued instead ctr. Same developer, but unlocks lots of things. For new chips. Like PX profile, that sadly you cannot use for 3600x chip,

Wow wonderful video as you presented the vid in nice shape. Your vid attract the viewer’s quickly. I like your efforts and appreciate you as you kept the combination in proper sequence or best fit arrangement. No doubt you are wonderful and deserve many likes. Good luck and Best Regards

Are you able to remove the io shield and see if there's a slot for a Wi-Fi card

Lower voltages if you choose to under-volt and don’t mind a lower frequency also. Depending on your chip’s rating, performance gains can be quite large if you use the software correctly. It has a steep learning curve and will take some time to complete on higher rated (gold, platinum) CPU’s. I reduced my highest clocked profile by 50 Mhz for added stability and changed the others to reflect the same settings and then enabled them all. I was able to achieve a 700 Mhz overclock on my gold rated 3700x and 400 Mhz on my 3600. In my experience, the “X” chips will clock higher and is probably AMD’s unofficial way to bin their chips……………at least this is what I surmise in my experience with Ryzen………both with this tool and manual overclocking.

I had to use 2 fan splitters for my x570 I think. Kinda shitty, but it runs. And now I've killed most my case fans anyways. It runs on pure AC power now.

Great review !

Thanks for the heads up on the fan headers. I will now reconsider!

sound is good?)

Do you know where i can buy replacement earcups for this headphone?

booting with pink stripes artifakts and (Code 43) in device manager. Cant install driver. Just kind like in your description. ;( Baked it 195° 11 minutes. No sucess. But at least not worse

Air flow mode for oven? Sry my english is not nice. I got the same bug on a zotac 2080ti amp and will post result here

Btw, I don't think you should put the motherboard on the anti-static (which I'm assuming it is) bag, put the MB on the box.

My fav case

how do I connect this headphone to my laptop with only one 3.5mm jack ? it seems like my laptop can't detect the headphone mic whereas the headphone sounds work just fine

I hope u answer this question since this video was posted a while back but, what kind of pin connectors do the fans use for controlling rgb? And do the fans just daisy chain together ?

Greetings, first of all, the unboxing video is very detailed. Just a quick question, I have this board about almost 2 years now, and recently I'm planning to add a second M.2 SSD to install on the board at the second M.2 SSD slot, but the size though, it's not as the same as default screw socket position, so I'm curious that how can you adjust/reposition the screw socket to the desired size/length, I tried to twist/rotate with a plier, but it doesn't seemed to moving and I'm afraid to break it. Thanks.

Sure you know this by now, but you can use a splitter for the fans. I have the same board, I have nine fans and I used splitters. I did use an AIO which pump uses a SATA connection, so connected the six fans on the 360 AIO (push/pull) to the two CPU headers and the other three fans to a second header leaving one free header. Dealing with controlling fans and RGB is still just awkward. Not too many controllers out there that work well and are available and also not proprietary.

Hello, I’m late I know but just wondering how good is the audio for gaming such as warzone?

mine just shit on me and dosent work on me heard alot of heard people also have this problem :/