Hi, nice setup, and amazing you used M3.8 ecu. Good job. Tuned it yourself? Was the methanol kit imperative to use? I thought a good intercooler and 1.2bar being not that high boost would not need it. Cheers mate.
Yes it is possible, however, the cooling system, methanol kit, software are all done. The fuel we use is of good quality. In addition, we take logs with the vehicle to see if there is a knock. no knock. Maybe the gearbox or pressure pad cannot withstand this power. There is no problem at the moment. It's about 10k km. Thanks..
For 250 HP you can go low budget with k04001 but I would go with a bigger turbo since you need other downpipe and injectors anyway, so rather also change headers and aim for higher HP.
aynı işlemler tum turbo değişimlerinde yapılıyor. ya oem hıbrıt 210-220 hp devam edın yada bıg turbo gırın malıyetler aynı cunku turbo degıstıkten sonra hemen hemen
@@oguzbayraktar7700 Anladım OEM hibrit yada k04 yaparsam mesela kaç cc enjektör kaç litre intercooler kaç inç downpipe egzoz yapmalıyım bunları bilmiyorum Stock motor Max 250 260 beygir kadar
@@cemalbayrin7821 380 cc s3 enjektör işinizi gorur . Cooler şart 6.5 lt den aşağı olmasın. DP egzoz tabiki gerekli . Minimum 70 lik çekmek lazım. DP 76 bile olabilir. Methanol kit bağlanırsa OEM hibrit setupta cooler yapmadan da olabilir.
@@oguzbayraktar7700 Enjektör şart mı peki stage 1yada 2 yazılım yeterli olmazmi K serisinden 64 olanı 250 beygir için yeterli olur mu başka K serisimi gerekli
@@mrviktoriordanov there is k04-64 turbo. Only this price 1250 dolar. This setup pomp fuel but there is second remap. 350+ HP with ethanol methanol and pressure :)
@@oguzbayraktar7700 k04 for 1250$ ? Sorry my friend but you got ripped off. With 10K i have friends with forged motor and make around 500-550hp. This build here cost max 5K.
![[SPY CAM] Alex MIREA / Audi A4 B5 1.8 Turbo quattro / Trofeul Rasnov 2017](/img/1.gif)
1.8T modifiye anlamında en iyi motorlardan 🤯
Sick, nuff said.
Wish my own s3 doing this.nice job!
No ładnie ładnie jak na 1.8t przystało haha
Same setup in my ibiza 👌
Drives great well done
Thanks this setup is wonderful for 1.8t engine:)
What extra parts do you have in your vehicle?
Hi, nice setup, and amazing you used M3.8 ecu. Good job. Tuned it yourself? Was the methanol kit imperative to use? I thought a good intercooler and 1.2bar being not that high boost would not need it. Cheers mate.
meanwhile, the van full sending it
Very good😊
Thanks :)
Holy shiiit😧
this thing flies !
thankss
Trafic 💪💪
hocam istanbulda bunu yapabilecek kim var önerir misin a4 1.8t var bende aynı motor
Поехал поднимать самооценку, ахаха))
Turbo ile bar dmucha?
How many hp?
Hey what's the afr under full load? It's hard to read in the video.
11.5 afr
HP?
Does this setup make any boost before 4k rpm?
it's not feasible with this turbo with this motor.
full boost in 4.700
this turbo boost is coming about 3.500 rpm
@@Drraven96 is the best turbo for this engine. Runs great from low to high rpm.
Hocam arabanın maşallahı var sormak istediğim bi soru var 1.4tsi k03 turbo var araçta k04 taksak sorun olur mu
Bobinlere falan da girmen lazım sadece turboyla olmaz buseferde stage 2 ye gecis yapcan masrafjn olur ama tek turbo degismekle olmuyor
With this chance from k03 to k04, Is posible the engine have damage or wear?
Yes it is possible, however, the cooling system, methanol kit, software are all done. The fuel we use is of good quality. In addition, we take logs with the vehicle to see if there is a knock. no knock. Maybe the gearbox or pressure pad cannot withstand this power. There is no problem at the moment. It's about 10k km. Thanks..
✈️✈️✈️
Thanks..
@@oguzbayraktar7700 Any problems with the car after the setup?
What are the mods you have done?
The gearbox is stock and still holding?
@@amidkarzhaliev I dont have a problem . There is a stock gearbox . There are two mods. First mod is 1.1 bar pump benzine. Second mode E50 1.7 bar
@@oguzbayraktar7700 thanks for your feedback :)
what size nozzle did you use for methanol injection?
ı m sorry dont remember
1.8T güzledir stock 20V gelir özellikle arabanız küçükse kaliteli bir tuning ile uzun ömürlü şaka makinaları uapmak mümkün😂
Why it looks like 160-180 at least ?? 🙊
Wow, very nice!
Thanks..
What turbo u actualy have and what else mod u have ?
There is k04-64 turbo. Another mode iş 1.7 bar E50 fuel
Is it stock k04 064?
@@tuukke1906 compression pal is bigger than oem size
Stock injectors?
550 CC bosch
Stock engine?
Stock engine only forged rods
420km
330 or more HP ?
I dont think more than 330 hp maybe about 300hp
Usta motor kodun nedir
Agu
@@oguzbayraktar7700 kardeş bende 1.8 t a4 b7 kasa vardı orjinali bfb kodlu usta şimdi üst kapağı apg kodlu takmış aynı Dior ama içime sinmedi
ECU edc15 mi?
OEM me3.8 ECU
350 whp??
approximately 300+ because 95 octane fuel
Stock Internals? How much hp/torque?
There is no internal , external wastegate . I did not measure the power of the car. evc off about 250+ hp
@@oguzbayraktar7700 by stock internals he means the engine block internals, rods, pistons, crank...
@@diogo1966 sorry only rods are forged. The others stock internals
¿OEM clutch?
Bronz clutch
@@oguzbayraktar7700 Only the disk reforced?
@@msperformance1.8T only disk other parts OEM
😂😂😂😂
и сколько будет ресурс этой "раздутой" баллалайки ?😅
1.8тis most better engine than 1.9tdi pd
Merhabalar bendede 1.8t varda ko4 takmak istiyorum Max 250 beygir gerekli tüm şeyler nelerdir yardımcı olursanız çok sevinirim şimdiden teşekkürler
For 250 HP you can go low budget with k04001 but I would go with a bigger turbo since you need other downpipe and injectors anyway, so rather also change headers and aim for higher HP.
aynı işlemler tum turbo değişimlerinde yapılıyor. ya oem hıbrıt 210-220 hp devam edın yada bıg turbo gırın malıyetler aynı cunku turbo degıstıkten sonra hemen hemen
@@oguzbayraktar7700 Anladım OEM hibrit yada k04 yaparsam mesela kaç cc enjektör kaç litre intercooler kaç inç downpipe egzoz yapmalıyım bunları bilmiyorum Stock motor Max 250 260 beygir kadar
@@cemalbayrin7821 380 cc s3 enjektör işinizi gorur . Cooler şart 6.5 lt den aşağı olmasın. DP egzoz tabiki gerekli . Minimum 70 lik çekmek lazım. DP 76 bile olabilir. Methanol kit bağlanırsa OEM hibrit setupta cooler yapmadan da olabilir.
@@oguzbayraktar7700 Enjektör şart mı peki stage 1yada 2 yazılım yeterli olmazmi K serisinden 64 olanı 250 beygir için yeterli olur mu başka K serisimi gerekli
was it expensive to build
Installing this setup cost about 9-10k dollars. Expensive or cheap varies from person to person :) I think it's not cheap
@@oguzbayraktar7700 9-10k hahahha this turbo costs 150$ remap 150$ and you have 250-260 hp
@@mrviktoriordanov there is k04-64 turbo. Only this price 1250 dolar. This setup pomp fuel but there is second remap. 350+ HP with ethanol methanol and pressure :)
@@oguzbayraktar7700 k04 for 1250$ ? Sorry my friend but you got ripped off. With 10K i have friends with forged motor and make around 500-550hp. This build here cost max 5K.
@2k23 joiner yes, you can be right, sometimes it can be more expensive in Türkiye.
ustam kaça mal olur şuanda bu setup
Hocam geçen hesap yaptığımda 200 bin TL tuttu güncel rakamlarla sıfır ürün seklinde
@@oguzbayraktar7700turbo haricinde ne yapıldı tam olarak acaba
Co tu ma jechać z tego 1.8
engine capacity
mein Audi A6 geht da schneller Vorwärts ;-) Traurig
damn dude, that didnt go anywhere lol
hp ?
Very good😊
thanks