Quick, cheap & easy router guiderail fix [video 569]
HTML-код
- Опубликовано: 7 июн 2024
- In this one I make a #router #guiderail adapter that’s quick, cheap and easy. Enjoy!
Register an interest in 10MW products at 10minutejigs.com * or directly with this link:-
tenminuteworkshop.myflodesk.c...
*If you were an early adopter of the 10MW Loose Tenon Jig you might find that the .com link redirects to the old site; please use the direct link above to register an interest, and please clear your browser cache - it’s been a couple of years!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
DIY SYS-TOTE - • $10 Tool Tote [video 567]
Bargain or Burden; first look at woodcrafts ‘MFT’ - • Bargain or Burden? I b...
3 MFT Rail Hinges - • 3 MFT Rail Hinges [**...
DIY Rail Hinge - • Pocket-money Rail Hing...
MFT & MFT-related Playlist - bit.ly/MFT-related
Basic Builds Playlist - bit.ly/BasicBuilds
My Last Build & Install - bit.ly/MyLastBuild
Square Cuts: MFT or Rail Square? - • Square cuts: MFT or Ra...
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Plywood A4 sheet hobby packs - amzn.to/4d3bg8H
3M strong double-sided tape - amzn.to/3u2Ekqw
Bessey DuoKlamp - amzn.to/3eDz1Ig
Hultafors Talmeter tape measure - amzn.to/2pHwnbH
Hinge drilling guide (used as a saddle square) - amzn.to/48jp0ty
Stainless steel graphics knife, Olfa SAC-1 - amzn.to/3DnWzvJ
BicMatic Fine point 0.5mm pencils - amzn.to/3uldrlX
Bosch professional 30mm forsnter bit - amzn.to/3SRIUmS
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (Gifted) - benchdogs.co.uk/collections/r...
Benchdogs Precision triangle (Gifted) - benchdogs.co.uk/collections/p...
Benchdogs carpenters square (Gifted) - benchdogs.co.uk/products/175m...
Benchdogs Ultra COMBI Max square - benchdogs.co.uk/products/ultr...
Benchdogs precision rulers (gifted) - benchdogs.co.uk/collections/r...
Benchdogs precision squares (gifted)- benchdogs.co.uk/products/stai...
Benchdogs CSC SYS Fence (gifted) - benchdogs.co.uk/collections/c... 
Хобби
![10 Tools I Wish I Had From The Start [Video 443]](http://i.ytimg.com/vi/enmHfvgRTrw/mqdefault.jpg)
![10 Tools I Wish I Had From The Start [Video 443]](/img/tr.png)
![Pocket-money DIY Railstop [video 570]](http://i.ytimg.com/vi/nWpSFoKJXeg/mqdefault.jpg)
![Latto - Sunday Service (feat. Megan Thee Stallion & Flo Milli) [Remix] (Official Video)](http://i.ytimg.com/vi/9gL0F1xIt2I/mqdefault.jpg)
Yes, a video on the different types of tapes would be very useful
Yes a tapes one would nicely complement your glues one
Perhaps compare to glue alternatives
Thanks! It’s coming… 👍
Yes, a double sided tape overview would be great.
Throw a few up and see which ones stick
A double sided tape video sounds like gripping content. I’d be glued to the screen!
That’s what we need - sticky content! 😂
Using the router bushing as a reference is brilliant. Also yes to a tape review video. There are so many take aways to adapt tools to use the straightness of a guild rail
Thanks! Yes, lots of potential with the guide bush! 👍👍
Brilliant concept Peter and a video on double-sided tape would be most interesting. Thanks again
Became a member today, this channel is top notch. Having done carpentry since the 80's, I've noticed a rather disturbing difference between YT channels doing carpenter content. There are a few YT channels of carpenters making YT videos, and then there are a TON of RUclipsrs making carpentry content. While all the channels can be informing, if you really want to learn something, follow and support the actual carpenters. They will give away a lot of invaluable knowledge without even knowing it. This is one of those channels.
Thank you, and welcome! 🙌👍
A lovely simple original project. Well done. And yes to the tapes video. An idea this project would help a lot of us if it came unassembled in a project pack - more profit for you.
Thanks! 👍
That's just brilliant, Peter! 😃
Thanks a bunch for the tutorial!!!
Stay safe there with your family! 🖖😊
Thanks, you too! 👍
I love your jig-techniques.
Always up to save some dollars with fun little projects like this. Thanks for video Peter!
Simple and elegant. Thank you for sharing!
Yes, please share your double-sided tape details. I've been using two different types and been unsatisfied with their performance.
Thanks! And yes, it’s coming! 👍
Thank you Peter! Lots of possibilities with this. Yes please on the different tapes.
Thank you Peter for another great video, and yes to the tape video, cheers and take care out there
Another great video, many thanks Peter.👍
Hi Peter, Very useful for the router , your ideas are never ending, as always a great video Take care
Thanks Shaun! 👍
Agreed double sided tape top 5 with applications 👍
Very well done Peter!
Thanks Steve! 👍
One of your best. Thanks Peter.
Thank you! 🙌 👍
Thank You
Simple, easy, universal, … a definite must have!!!
Thank you! 👍
Love it - thanks Peter.
Double sided tape video would be handy. Many of the Japanese makers use it with amazing results. I am useless when it comes to using Super Glue, get more on my fingers than anything else....
Well done as always
Quick improvement if you only have one router: trace the base of the router on the thick top part and cut it out, then drill the hole for the router bit only in the thin part that goes beside the rail. That way you only lose up to 5 mm depth and can slot the router into the cut out and it will stay in place without screwing it in.
Yes, if that's all you need, but using the 30mm guide bush means that you make the jig once and use it with every router you may own, now or in the future. 👍
I will be making this. I was about to make a jig for my router to follow for a project I am working on, but this is a much better solution.
Sounds great! 👍
Thanks Peter, a fine idea
Thanks, this video has given me some ideas. A video on tapes would be appreciated.
Yes, I'd love to see a double-sided tape video. I need a double-sided tape that will permanently stick to metal roof trusses that get quite hot.
Old school Peter, love it.
He's still in there somewhere David! 😂 👍
Brilliant idea 👍
Thanks for this. I like. I have the 1400, rail and guide. I'm not mad keen on the guide, although it's 7/10 for me. Your ply version is appealing. I can attest to the 30mm hole for bushing being a great touch as I use the same on a circle template (but of ply with 30mm hole near one end). With your guide, I would bridge the second ridge in the rail which would allow the guide to be locked in position in the same way you have done the stops. This allows accurate plunge cutting - potentially in combo with additional stops - for anybody who doesn't own a pillar drill, like me! Accurate jig making with M6 (1mm per turn) can mes an increment closer. Yes to the tape type video if you please.
I know what I’ll be making at the weekend ! Cheers Peter !
Cheers Lewis! 😂 👍
Great Simple Effective 😊
Thanks Peter, I think this is something I need to make, I can think of a number of situations where this would be useful to have !
You've offered the tape, so you'd better stick to it ! 😉
I just knew that adhesive joke would come up eventually! 😂Thanks Andy! 👍
I was planning to do this using acrylic or polycarbonate for my milwaukee rails and dewalt mega powerful "trim" router. BUT inspired by you and your LR32 videos I was planning to copy the double way latch mechanism and hole pattern in the rail(s) too. But with other sets of hole spacings along side each other if there's room. :-) PS yes to tape episode, even if short form, provided not a yt short ;-)
Simple. Like it 👍
Nice thanks sure to make one ❤
Excellent Peter,cheap as chips gets my vote!👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎
Cheers Alan! 👍
Yet another solution. Thanks 🙏🏽
Thank you! 👍
Great video. Now I just need a guide rail and some time 🙂
Hi Peter. May we see a full demo of your fine looking new product. I see now how I have fouled up with my routering in this process before. Thankyou.
Yes, absolutely - it’s coming soon. 👍👍
Got a jig similar to that, love to make jigs.
Thanks for sharing.
👏🏼🌟It’s a winner Peter.
Thanks Mandy! 👍
I bought a couple of thin polyethylene cutting boards for £2.99 each today for another little job (to make some 'saucers' to go under the feet of a sofa bed so that they slide nicely when the bed is opened and don't damage the floor).
They are somewhere between A4 and A3 in size and about 3mm thick. They would make ideal support pieces for your guide, would slide really easily and not damage the wood.
Yes Peter, a video about tapes would be interesting.
But still waiting for the low budget router table 😉
It’s coming… 👍
@@10MinuteWorkshop 😍
I’ve been thinking of making something like this for a while. It just needs an additional piece to be able to line up the adapter and rail with layout lines. Maybe something that fits in the guide bush hole or fits over the rail in the same way, but cut to line up with the centre of the router bit.
The layout lines are on the face of the jig, and extend down the edges for easy reference to lines on the workpiece; they are absolutely centred - that's why I used the marking knife and the forstner tip to locate it. I've never needed anything else. 👍
A lot of people seem to be wanting the tape video, I guess you're going to have to do it now! Yes please.
I guess I’ll have to! 😂👍
The reliability of using stops is a factor of how snug the jig is to the rail combined with how far away from the rail the router bit sits. As such, I think it is better to reference the other rib and work off of the other side of the rail. Any base slightly taller than the ribs on the rail would work and you don't need to worry about 5mm boards at all.
If that’s what you need then that’s what you,should make, just be aware that going that way around that would take a minimum of 12mm off the depth of plunge. 👍
Cool idea. I collect tape so more info "wood" be great!
Simple is efficient.
FINALLY a jig you came up with I don't have to make!🤣🤣🤣 Made one of those about 9 years ago for my PC890. Used a 1`/4" hard board, I thinned down, under the jig to level it out. Used it for about 6 years. and it worked great.
Now days I use the LR32 router guide plate/sled with an adapter for my PC890. On a 32mm holy rail. I do normal shelf pin holes, and with a piece of 1/4" plywood under the rocker center button, it lifts the pin, so I can do dados/rabbits as well. Don't have to worry about the stability and tipping as there are spacers built into the guide plate already.
Hi. A UHMW jig made using a cheap cutting board would make it slide a bit smoother
How wonderful it will be if we can create y axis movement as well
Brilliant idea. my Rutlands router motor just failed catastrophically and I've been using a Makita trimmer in my router table which is less than ideal. I'll knock one of these up for the big Dewalt to use it on the MFT until I finish fighting with Rutlands to get them to honour their warranty and get my table back in business. I think I'll probably make it out of a single piece of polycarbonate for strength and rout it to fit over the guide rail and provide the supporting foot. There aren't many universal router guide rail adapters on the market.
Thanks! 👍
I would suggest sanding the edges which press on the rail and giving them a spot of wax polish. This should minimise wear on the track if you're using this jig frequently.
+1 for the tape video
Yes, a video on the different types of tapes and where they are useful would good
It’s coming… 👍
@@10MinuteWorkshop Thanks Peter
First to watch and like - feel like I've won a RUclips level! Thanks for your videos. I've watched and rewatched so many of them over the last six months, to the point where my fiance calls you Uncle Peter when she hears your voice coming from my computer!
Wow, thanks! 🙌 😂
Nicely done. UHMW plastic comes to mind. Its more expensive but nice and slippery. I also wonder if putting shelf pin spacing holes in the rail would be "good".
Thanks. If I was making something commercially it would probably be from the same CompacMel material the loose tenon jigs are made from. And it’s on the list. 👍👍
I just used a shelf pin jig to put 5mil holes with 32mm spacing in my Wen Track guide rail to make a LR-32 rail. Bought a rail adapter which I’m waiting for. I just saw this and now feel like I waisted the money. This was a great solution with a 5mil hole in line with my rail…brilliant idea.
Definitely interested in the different double-sided tapes. Whether any of them are available here in Australia remains to be seen!
Thanks! Yes, that’s always the challenge! 👍
Great idea, I thing base should not be flat all along, instead it should raise on four points, it will reduce friction and space for wood dust will be created hence less chance of scratches
Well, having made one and used it for years without any issues I disagree, but as always I offer up these ideas as starting points for you to adapt to your needs as you see fit. 👍
Have you considered using Valchromat for jigs rather than plywood? It's an MDF like material where they dye the wood fibres and use an epoxy glue rather than a formaldehyde one. It's stronger and dimensionally more stable than standard MDF and plywood. It's also cheaper than birch plywood.
I’m familiar with Valchromat thanks - it’s what my benches are made of. As I think I say in the video, I tend to use Birch ply because it looks good and is relatable ie most people know what it is and can get their hands on it, albeit at a price. That’s not the case with coloured MDF like Valchromat or Fibracolour, which is much harder to get hold of in eg the US. And just for the record, the MRMDF that I use also has a formaldehyde free adhesive. 👍
Thanks so much Peter, I was one of those expressing jealousy of your LR32 router guide! I also saw a guy make a shelf pin guide where he used a shelf pin stuck on the end of the board to register against a fence of semi circular holes, the same principle as when you made an MFT top from the LR32 using the router. Perhaps it could be an offering for your 10MW product line onde day??? Anyway thanks again and have a good weekend.
Cheers Danny. Yes, that’s on the cards. 👍👍
Top tapes tips....yes please
If possible, could you review the virutex dowelling joiner? See how it compares to the red one reviewed and the Triton one.
From what I’ve seen it looks like a solid product that’s a little less expensive to buy than the Mafell. Unfortunately Virutex seem to have very little interest in serving the UK market, so I don’t think it’s likely that I’ll get my hands on one. 🤷♂️👍
another day in the shop making a new jig-----thanx Peter rick
Thanks Rick! 👍
Yes to tape 😊
Yes to the top tapes!! Thanks.
@Peter Millard Can you do a DIY Table router ideally for a Bosch PoF 1220ea
It on the list, though not specifically for the Bosch. 👍
thank you. have been looking for a guide rail adapter for Makita track / Bosch router for some time. this will absolutely work! Am wondering if there is something to put on the underside of the part the router sits on that would reduce friction as it slides across
the material ? some kinda roller bearing or as someone below mentioned - polycarbonate ? Ala the friction strips on the alum track?
In my experience there’s very little friction on the rails or the workpiece, but if you feel the need then there’s low-friction tape you can buy. eg amzn.to/4b5DnC6 👍
@@10MinuteWorkshop Awesome -- Thank you again
Ahhhh an idea trigger!
Always! 😂👍
When I click on Amazon link for double sided tape here in USA so many choices come up. Which one - size, material (some are clear, some black) are you using and which do you recommend? If possible I need more specifics. Yes to tape video!
Thanks. My amazon links open to the product in your local store - if it isn't singling out one product then it's likely that the exact one I'm using isn't available where you are. The strong tape is 3M 9088. 👍
Nice 👌 How did you manage without that little table saw 😅
Thanks! And honestly, I would have found a way - but it really does tick the boxes for these kind of little trimming cuts. 👍👍
I should have made this instead of my overly complicated version for my Katsu!
Where did you get your marking knife, I've not seen on that's not from USA?
It was a special by Nate from SimplyOrn8 - @simply_orn8 on instagram, Etsy store here - www.etsy.com/shop/simplyorn8
UK here: If you don't mind my asking, where did you get that rubber-bench-top with clamp-holes (? 2 cm diam) in it?
It’s not rubber, it’s a coloured throughout MDF called Fibracolour. I made the bench top, covered the process in this video 👍 - DIY MFT; ruclips.net/video/223QALIbnRc/видео.html
How do you find the battery life on your table saw? I’m surprised you went for a cordless one, considering it is set up in a workshop all of the time.
No issues with battery life, purchasing reasons explained a year ago here 👍; "Why buy this saw" - ruclips.net/video/u7H5On0j_5c/видео.htmlsi=svjv_7NpgQnlp4BN
It seems to me I'd always be working hard to keep the router from sliding off the "sled". I prefer to use two hands on the router ...does it slide off the Sled under use?
Nope, router locates accurately in the sled and works fine - but feel free to us another solution. 🤷♂️ 👍
I would be glued to the screen during a video about tapes ! Roll it on.......
😂👍
What is that sliding contraption on the table saw @1:49 ?
It’s a sliding table. 👍
Would be interested in a tape video
On it! 👍
BTW, I asked on a video I saw it in, but not sure if you saw and ignored or didn't see, but can you tell me ifnthe 5 inch 125mm round velcro sanding "block" / handle you had or have is home made or bought and if bought what is it, and if home made do a vid on sanding accessories? :-D
I like the idea of it for lots of reasons :-)
I get 300-400 comments and messages a day, so I have a ton of rules and filters applied; as a general rule if it’s on an older video I probably won’t have seen it. The hand sanding pads were a good way to keep using old pads from a random orbital sander, and I’ve done a couple of videos on them, most recent one linked below. 👍 Hand Sanding Pads [video #244]
ruclips.net/video/jeAGbrowJS4/видео.html
@@10MinuteWorkshop Yeah, it was an old video and no I wasn't complaining just stating that this comment was a duplicate, and thank you very much - as soon as you sat down at the bench with them I could see 100% home made and exactly how I expected/envisaged and would have done it myself if I'd had the idea. Really appreciate the link and no idea why I didn't search your back catalogue for it, except maybe that I didn't know what to search for - pad - got it :-D
Nooice
I don't understand. You have one of the most expensive routers on the market but you need a cheap track? Routers come with curved side (partial circle) which at its center is the bit. There is zero reason for a track.
Watch it again and pay attention; I explain clearly why the track is useful. At the risk of stating the obvious, I don’t make these videos for myself - check out the comments, you’ll find many people understand what you don’t. 👍