Un veritable regal a regarder. Dommage que l'on ne nous montre pas la fabrication du tout debut jusqu'au produit pret a porter. C'est trop captivant ! Si je devais avoir une seconde vie, je serais graveuse heraldiste !!!
De toute beauté,de l art,que dire de plus,mis à part que le résultat est magnifique,de l or dans les mains.un réel plaisir à regarder cette vidéo.merci.
@@philippelm9096 il me semble qu'avec la bague vierge taille intermédiaire homme (~2000e) le total grimpe à 3000 et des poussières, donc la gravure (avec ornements) aux alentours de 1000/1100 e je dirais L'ayant reçue pour un anniversaire, je ne suis pas le plus au fait des prix. Cependant, si vous allez sur son site, vous pourrez aisément réaliser un devis : www.douliere.com/
Je n'ai pas encore les moyens de m'offrir une chevalière en or avec une pierre mais pour le moment j'en ai en acier inoxydable sans armoirie qui me plaît bien.
It would not be impossible to cut lines etc with a Dremel. However, challenge of it will depend upon size and effective use of a burr, in particular lines and pinhead curved parts. Above all, level of dexterity of the hand, --in cutting-- on such surface becomes highly relevant if high quality engraving is expected. Before launching into cutting gold signet rings etc, practicing on lower quality, soft metals could assist engravers to prove to himself/herself own ability to manage such a challenge. good luck.
What did he do? He sneaked the ring into a laser engraving machine (the bit we didn't see) and suddenly he went from a couple of lines to the fully carved lion. What a fraud.
What is possible is image/drawing/photo to be marked by laser. It can then be incised as seen in video. CNC is capable to cut deeper but laser does not do deep cuts it will produce majority designs, followed by touching up with hand/air gravers.
OMG !!..I didn't even know that this kind of work exists in this modern and technological world...
Beautiful !
Un veritable regal a regarder. Dommage que l'on ne nous montre pas la fabrication du tout debut jusqu'au produit pret a porter. C'est trop captivant ! Si je devais avoir une seconde vie, je serais graveuse heraldiste !!!
So many years are gone, and I still looking for for music from this masterpiece video work.
so, why not ask this engraver?
De toute beauté,de l art,que dire de plus,mis à part que le résultat est magnifique,de l or dans les mains.un réel plaisir à regarder cette vidéo.merci.
Felicidades mi querido amigo saludos y bendiciones
Огонь! Работа мастера достойна восхищения!
Great work! Loved to watch. Greetings from Germany.
Absolutely fantastic
Artisan d'exception
Ma chevalière réalisée par ses soins est extraordinaire
bonjour R.deM. sans indiscrétion de ma part j'aimerai savoir le prix, ou du moins une fourchette de prix de la réalisation d'une chevalière.
@@philippelm9096 il me semble qu'avec la bague vierge taille intermédiaire homme (~2000e) le total grimpe à 3000 et des poussières, donc la gravure (avec ornements) aux alentours de 1000/1100 e je dirais
L'ayant reçue pour un anniversaire, je ne suis pas le plus au fait des prix. Cependant, si vous allez sur son site, vous pourrez aisément réaliser un devis : www.douliere.com/
@@KlausWitz merci beaucoup!
Excellent work! Congratulations.
Monsieur vous êtes trop class
C'est assez intéressant et incroyable!
Masterful!
Good job..
what carot gold is this ring please?
Je n'ai pas encore les moyens de m'offrir une chevalière en or avec une pierre mais pour le moment j'en ai en acier inoxydable sans armoirie qui me plaît bien.
Combien reviens le coup pour une fabrication artisanale
Sublime
Minunat!
I love it
Beautiful
Bonsoir
Genius
amazing
T.O.P.
Is he still alive and do this work?
what is the name of this song? leave the link
Je suis un intéressé
What tools do you use? :)
Shtikhels.
Nice
May I know wats the background music in this vid?
Afrin Mifti They never mention the background music in videos..sometimes I like background tracks more than the video itself.
song please?
herman trisno I also want to know the song name.
bonjours je suis novice dans la gravure je voudrais savoir si ont peut graver avec un dremel
It would not be impossible to cut lines etc with a Dremel. However, challenge of it will depend upon size and effective use of a burr, in particular lines and pinhead curved parts.
Above all, level of dexterity of the hand, --in cutting-- on such surface becomes highly relevant if high quality engraving is expected. Before launching into cutting gold signet rings etc, practicing on lower quality, soft metals could assist engravers to prove to himself/herself own ability to manage such a challenge.
good luck.
Uuy ஏ மற்றும் சி அல்லது அஸ்கார்பிக் அமிலமானது இன் கொடி ஐக்கிய அமெரிக்கா குடியரசு இன் கொடி இந்தியா ஆந்திரப்
What did he do? He sneaked the ring into a laser engraving machine (the bit we didn't see) and suddenly he went from a couple of lines to the fully carved lion.
What a fraud.
Laser machines can't do that yet.
Cnc can do
I had done it perfect by using cnc
@@lindaann9301 Could you please link to a photo? I'd be very interested.
What is possible is image/drawing/photo to be marked by laser. It can then be incised as seen in video. CNC is capable to cut deeper but laser does not do deep cuts it will produce majority designs, followed by touching up with hand/air gravers.