When you stated talking about being a professional because you had test tunes and a test tube rack.... I immediately liked and subscribed... big fan of that type of dry humor lmao
Shouldn’t the solution containing base metals dissolved from the muriatic acid be rinsed out before using aqua regia to put any gold in solution in what’s left? Thanks!
Great video! I did also the aqua regia mix with the crushed rocks. I used HCL & Nitric acid, but I'm noticing when I use urea to kill the Nitric; the urea is not dissolving 100%. Half still floating at the top. Not sure to heat the mix with the urea in it?? Any suggestions?
I now dissolve the urea with water before adding it to the AR. This way you don’t get undissolved urea in the mix. You can also heat the AR to help dissolve the urea but you need to cool it down before precipitating.
Great video ! Keep it up. Question: Does the HCL remove all the sulfides (same as roasting), or should you roast the sample prior to adding chemicals ?
It is my understanding that the sulphur will produce hydrogen sulfide gas and chlorine gas as the sulfur takes hydrogen from the HCl. It also contaminates the solution with whatever the sulfur was originally bonded with. If you have a lot of sulfides, roasting in advanced would be a good idea.
Thanks for the demo. I once did this experiment. I added stanous chloride the aqua rigia rich mixture , the change of colour immediately happened. When I took the same sample for an XRF assessment, I was told there was no gold. How can this be Sir?
If the nitric acid is not completely neutralized, the stanous test will give you a false positive. Also if there is palladium in the test sample it could look like a strong positive for gold. Other metals can also contaminate the AR and give odd results.
@@thisoldminewithlars5324 I mean when you mix all solution in one beaker and then at 15:40 I little bit confuse, cause you didn't do the denox with urea, but use smb to get precipitate,,, is it we can get the gold without denox the aqua regia with urea?
I don’t use an excess of nitric in the tests so the denoting is minimal. I usually re-treat the ore after I do a test to get all the gold. Denoxing is critical if you have a lot of nitric left over. Other than denoxing, you will need to use extra SMB to precipitate.
I did the same experiment on a sample. The result was strange. The color of the sample changes to black gradually and takes about half an hour. Does this mean there is gold in the sample?
It probably indicates that you have other metals or PMGs in solution. Platinum, palladium or iron and copper. I have had this happen as well. Sometimes you just can’t get around it without doing more processing.
can't you just cut filter paper into strips, dip the strips in the solution and drop the stanous chloride to the strip. Much less waste than either procedure you chose
Yes, at times I do use them. When refining gold at higher concentrations the change on the paper strip is instantly noticeable, but the paper strip method is difficult for me to read with low gold concentrations. In the spot plate method, any positive test is not discarded. I save all the little squirts of positive tests, than once I accumulate enough I redissolve in AR and precipitate with SMB or ferrous sulfate.
When you stated talking about being a professional because you had test tunes and a test tube rack.... I immediately liked and subscribed... big fan of that type of dry humor lmao
@@dustinwalker5481 That’s me. Thanks for subscribing.
One of the only guys using a fume hood and respirator 👍
@@WildernessMedic someday I will die, just not today.
Totally awesome Brother thank you see ya 🎉😊
Great video, and really funny episode with you cracking on yourself throughout the whole thing. lol! 😂 Thanks for the knowledge.
Thank you. I try to keep things lite and humorous.
Nice one Lars.. 😊
Thank you.
Stannous also goes brownish if theres an excess of sulfur dioxide dissolved in the solution
Can’t wait to see the next video to see how much gold is in the rocks.
I hope there is a lot.
Shouldn’t the solution containing base metals dissolved from the muriatic acid be rinsed out before using aqua regia to put any gold in solution in what’s left? Thanks!
Yes. That would give you better results in the end.
Great video! I did also the aqua regia mix with the crushed rocks. I used HCL & Nitric acid, but I'm noticing when I use urea to kill the Nitric; the urea is not dissolving 100%. Half still floating at the top. Not sure to heat the mix with the urea in it?? Any suggestions?
I now dissolve the urea with water before adding it to the AR. This way you don’t get undissolved urea in the mix. You can also heat the AR to help dissolve the urea but you need to cool it down before precipitating.
@@thisoldminewithlars5324 Got it! Thank you!
Great video ! Keep it up. Question: Does the HCL remove all the sulfides (same as roasting), or should you roast the sample prior to adding chemicals ?
It is my understanding that the sulphur will produce hydrogen sulfide gas and chlorine gas as the sulfur takes hydrogen from the HCl. It also contaminates the solution with whatever the sulfur was originally bonded with. If you have a lot of sulfides, roasting in advanced would be a good idea.
16:00 Did you deNOx this combo solution? Looks like not.
I think you may be correct.
Much enjoyed.
Thank you
Love you so much❤❤
Smb not always preciptates Au from AR. Especialy when urea is used to kill nitric
Good tip. Thanks.
Haha haha... Yup you are professional 😊😀😀😀
Silver chloride maybe? Silver reacts with chlorine right?
Yes. Silver in Hydrochloric acid will precipitate silver chloride.
Thanks for the demo. I once did this experiment. I added stanous chloride the aqua rigia rich mixture , the change of colour immediately happened. When I took the same sample for an XRF assessment, I was told there was no gold. How can this be Sir?
If the nitric acid is not completely neutralized, the stanous test will give you a false positive. Also if there is palladium in the test sample it could look like a strong positive for gold. Other metals can also contaminate the AR and give odd results.
Sir why you immediately using smb to get precipitate ? Why not denox that solution with urea first?
I got a bit ahead of myself but at 13:05 I re-tested with denoxing.
@@thisoldminewithlars5324 I mean when you mix all solution in one beaker and then at 15:40 I little bit confuse, cause you didn't do the denox with urea, but use smb to get precipitate,,, is it we can get the gold without denox the aqua regia with urea?
I don’t use an excess of nitric in the tests so the denoting is minimal. I usually re-treat the ore after I do a test to get all the gold. Denoxing is critical if you have a lot of nitric left over. Other than denoxing, you will need to use extra SMB to precipitate.
I did the same experiment on a sample. The result was strange. The color of the sample changes to black gradually and takes about half an hour. Does this mean there is gold in the sample?
It probably indicates that you have other metals or PMGs in solution. Platinum, palladium or iron and copper. I have had this happen as well. Sometimes you just can’t get around it without doing more processing.
Kool......
Platinum makes a yellow salt
Good I like to see more videos 😊
can't you just cut filter paper into strips, dip the strips in the solution and drop the stanous chloride to the strip. Much less waste than either procedure you chose
Yes, at times I do use them. When refining gold at higher concentrations the change on the paper strip is instantly noticeable, but the paper strip method is difficult for me to read with low gold concentrations. In the spot plate method, any positive test is not discarded. I save all the little squirts of positive tests, than once I accumulate enough I redissolve in AR and precipitate with SMB or ferrous sulfate.
respirators don't help with chlorine gas
Good tip. I tend to use my fume hood nowadays.
Перевод