Galing boss, ganito ung mga makita na drill eh, lalo na ung HP1630, hirap tanggalin ng chuck nun. The best ka talaga boss salamat sa pag share ng kaalaman. 👍😄👌
ung local sir ng bosch impact drill ko ganyan din no nut,ginawaan ko nlng paraan inipit grip ko nlng ng longnose para maibalik at mahigpitan ang drill chuck,
Here's how I was taught to do it by my manager when I was doing my apprenticeship :- 1. Remove left handed screw from chuck 2. With the whole drill assembled, place the gearbox in first gear 3. Using either the chuck key or an Allen key hit it with a hammer so that the chuck spins off anti clockwise as if you were facing the front of the chuck jaws. 4. Fit the new chuck in reverse order to how the old one was removed except it doesn't need to be wacked back on !
Galing boss, ganito ung mga makita na drill eh, lalo na ung HP1630, hirap tanggalin ng chuck nun. The best ka talaga boss salamat sa pag share ng kaalaman. 👍😄👌
ung local sir ng bosch impact drill ko ganyan din no nut,ginawaan ko nlng paraan inipit grip ko nlng ng longnose para maibalik at mahigpitan ang drill chuck,
Thanks good and simple❤ 4:25
Very much good and best of luck
Muy buen vídeo!! sigue así!! Saludos desde argentina!! son geniales
Sir request sana if possible. replacement ng keyless chuck ng keelat. hard to replace po. thanks
Pag may available ako
How to order ?
Here's how I was taught to do it by my manager when I was doing my apprenticeship :-
1. Remove left handed screw from chuck
2. With the whole drill assembled, place the gearbox in first gear
3. Using either the chuck key or an Allen key hit it with a hammer so that the chuck spins off anti clockwise as if you were facing the front of the chuck jaws.
4. Fit the new chuck in reverse order to how the old one was removed except it doesn't need to be wacked back on !
that only works if there is a left hand set screw - which this clearly does not have
wow naka ingco siya ngayon
❤❤❤👍