Awesome video get on his ace you got a good son great driver some time pop's got to learn the son some knowledge keep it up Holland fan for life. Clay from mobile Alabama
Chase fine job.. Looks real nice.. Sometimes you gotta do what you feel.. It's alright to spread your wings and fly.. Give Dad a Hug.. Lucky you have a good man like Him . Don't get mad, get even.lol
I always enjoy watching the content you provide for us. You all make it very enjoyable for your fans and potential sponsors great job Pat yourselves on the back can it wait until the next racing video God bless you all. Just wanted to let you guys know I lost my father February 1st 2019 what's the hardest days of my life he passed in my arms Rest in Peace Dad
LOVE Y'ALL AND Y'ALL'S FAMILY 🙏 The video's are always AWESOME 🤗❤️ Keep these great videos coming. FAMILY IS EVERYTHING 🤗❤️🙏 And Chase YOU CAN WIN MORE THAN 5 🏁🏆🏁 I BELIEVE IN YOU AND YOUR ABILITY ❤️🤗🙏🏁🏆🏁
Hi, I'm a new fan/subscriber that loves your channel. I especially enjoy watching you guys fab up the sheet metal, as I'm an hvac sheet metal guy myself. Chase put yourself a table behind that break, let the sheet stick through and break the front edge of the metal. Rotate counter clockwise if you've got multiple 90s to bend, and they'll fit up to 1 1/2 inch off edge of break. Keep up the good work! Drive it like ya stole it!
I've watch many times and I remember when you explain why you are running 07 and showed pictures of your DAD'S car what a nice tribute family is most important
Family means everything so just keep on the remembrance on till it runs it course. Time will tell you when it's time to go back to Chase's number and his identity of the 45 till then God will bless you all
It's good to see a little bit up father son conflict I went through it with my son started him at 16 years old took care of everything for the first four years sent him to set up schools he learned got to the point where he knew more about it than I did 190 knocked the back end off the car in North Dakota third night running in a row that week broke my heart when I seen pictures of the whole back end from the cage back cut off he didn't call me he didn't call me out to the ranch to help about a night or two later I seen pictures he had the back frame on the back down bars putting it back together I knew he wasn't going to be at the ranch that night I went out there pretty much broken hearted again took a tape measure and start pulling measurements I left the ranch with tears in my eyes of joy my boy as my fabricating skills he can build his engines at that point I took a step back and I'm there for moral support LOL he still says financial support is 110 or 11 track championships up in northern Minnesota last couple years he won two track championships each year took fifth and with soda last year 4th in Minnesota he's now 32 years old his name is Skyler Smith and I could never be prouder of the man he became and the competitor but it is beautiful to see father-son conflict it's going to happen and it's only going to make you both better appreciate you
How about a top ten finish in a USMTS feature then a top five. Then possibly a feature win... Because five USMTS feature wins is only possibly if you have someone around that has been a part of winning five or more feature wins. Which even at that you still have to be working harder than the hardest working team. This means if you need one spot; in order to get into the feature. You will need three spots to put yourself in a spot to win the feature. Aside from the redraw...
Great video as always. I have a question for y’all though. The question is did y’all see the announcement about the race is October for the dirt race in North Wilkesboro speedway?
Awesome video get on his ace you got a good son great driver some time pop's got to learn the son some knowledge keep it up Holland fan for life. Clay from mobile Alabama
Chase fine job..
Looks real nice..
Sometimes you gotta do what you feel..
It's alright to spread your wings and fly..
Give Dad a Hug..
Lucky you have a good man like Him .
Don't get mad, get even.lol
Keep your throw-back as is for the season.. I think it's an honor to your dad. Y'all are awesome!
Oh yeah Money Eater!! I'm excited for the next video of racing..!! I love the number idea.! Blessings to you all .!!
Redman u got a bright future. Plus a God gifted talent. Heck of a wheel man
Chase that bead roller is awesome. Think doing something different is what molds you. Keep up the strong work!
Wait a minute I didn't know you were going to play corn hole. LOL. Looks like fun was had by all.
Put the money eater in Winners Circle this weekend.
Fun, Fun! Love it Guys!
Love Holland racing!!! Thanks for the content guys!!!🏁🏁🏁
I always enjoy watching the content you provide for us. You all make it very enjoyable for your fans and potential sponsors great job Pat yourselves on the back can it wait until the next racing video God bless you all. Just wanted to let you guys know I lost my father February 1st 2019 what's the hardest days of my life he passed in my arms Rest in Peace Dad
“Good looking elbows”🤣🤣🤣
That looks really nice I really like the bedro on the decking
Great job on the body chase great family over all love u guys
You got it going your way Chase! I'm proud of you man!
Don’t wanna be a stickler but better throw some bead rolls on the roof👌.Awesome job nice to see some old school bead rolled bodies now and then.
The content yall deliver on a regular basis is mind blowing!! Love this family!!!
That bead roll is bad azz. Ready for ya to run again. Go Team. Rooting for yall from East Tennessee
Y'all are the best we love yall
LOVE Y'ALL AND Y'ALL'S FAMILY 🙏 The video's are always AWESOME 🤗❤️ Keep these great videos coming. FAMILY IS EVERYTHING 🤗❤️🙏 And Chase YOU CAN WIN MORE THAN 5 🏁🏆🏁 I BELIEVE IN YOU AND YOUR ABILITY ❤️🤗🙏🏁🏆🏁
Can't wait to see you guys at Lucas oil and Humboldt.
Hi, I'm a new fan/subscriber that loves your channel. I especially enjoy watching you guys fab up the sheet metal, as I'm an hvac sheet metal guy myself. Chase put yourself a table behind that break, let the sheet stick through and break the front edge of the metal. Rotate counter clockwise if you've got multiple 90s to bend, and they'll fit up to 1 1/2 inch off edge of break. Keep up the good work! Drive it like ya stole it!
Looks like fun times.
I've watch many times and I remember when you explain why you are running 07 and showed pictures of your DAD'S car what a nice tribute family is most important
Family means everything so just keep on the remembrance on till it runs it course. Time will tell you when it's time to go back to Chase's number and his identity of the 45 till then God will bless you all
Looks like good stuff. I didn't see the life of the party where was miss Ruby.
When y’all do a Timelapse I need Chase to dance really really slow in front of the camera so it looks like he’s dancing normal! I’ll be waiting……. Lol
Looking fine man!
Thank you great stuff
On each end of the break there is a small gap for u to use to bend the 90 on an adjacent 90
Should try moving the nose you mounted on the wall closer to the floor. Could make it into a wall mount table.
Great video
Gotta run papas## ! For a year!!
Nice way of using the ladder
It's good to see a little bit up father son conflict I went through it with my son started him at 16 years old took care of everything for the first four years sent him to set up schools he learned got to the point where he knew more about it than I did 190 knocked the back end off the car in North Dakota third night running in a row that week broke my heart when I seen pictures of the whole back end from the cage back cut off he didn't call me he didn't call me out to the ranch to help about a night or two later I seen pictures he had the back frame on the back down bars putting it back together I knew he wasn't going to be at the ranch that night I went out there pretty much broken hearted again took a tape measure and start pulling measurements I left the ranch with tears in my eyes of joy my boy as my fabricating skills he can build his engines at that point I took a step back and I'm there for moral support LOL he still says financial support is 110 or 11 track championships up in northern Minnesota last couple years he won two track championships each year took fifth and with soda last year 4th in Minnesota he's now 32 years old his name is Skyler Smith and I could never be prouder of the man he became and the competitor but it is beautiful to see father-son conflict it's going to happen and it's only going to make you both better appreciate you
Hey what's up yall!
How about a top ten finish in a USMTS feature then a top five. Then possibly a feature win...
Because five USMTS feature wins is only possibly if you have someone around that has been a part of winning five or more feature wins.
Which even at that you still have to be working harder than the hardest working team. This means if you need one spot; in order to get into the feature. You will need three spots to put yourself in a spot to win the feature. Aside from the redraw...
It was a joke…
I bet he can win 8 this year, Grandpa is gonna help chase find victory lane.
Haha baby 👶 feeling
that's one a them there top step ladders, it actually say's "step here"@ 10:57
Great video as always. I have a question for y’all though. The question is did y’all see the announcement about the race is October for the dirt race in North Wilkesboro speedway?
Bend me over the car and give him spanking just joking 😂 you all fun keep it up
Hey Hey Hey!!.. It's ?!!?
You think they enough lead on that street stock?
Define crazy bead rollll'n?
Instead of chosing to have the faded 7 number in the 45, split half the car to have the 7 wrap and the outher half of the car be the new 45 wrap
Work Bench ???
1st
Wehrs machine plug wire holders keep them wires out the way nicely pn: WM15