Lone star : Tell your buddy he did a hell of a job. The hrs are no joke for those who have done and care about every detail. The 6L80E info given is worth it's weight in gold to me......at least now I see what I'm in for. That info is very hard to come by. Hopefully you guys can share your LS mounting strategy.....motor mounts, oil pan , headers etc. Awesome video!! Thanks so much guys!......And good luck on the paint!!!
James. Great. Whole point of my videos. I told him i waa going to interview him and at first it was a joke. But it was fun! We will do one for the chassis too . stayed tuned
That’s one hell of a job for sure!!! Your buddy did awesome!!! I’m doing an LS as well and info is hard to come by at times. I’m going with a LS2 or 3 with a 4l60 or 4l80 for reason being it should fit without any mods in the tunnel. BRP muscle rods I have heard are great mounts but they cost way to much. Keep the videos coming. Thanks again!!!
Ive done headliner w 44. I didnt do the vynil withthe bows. I did a fabric headliner. Came out good. Its on a video i uploaded showing a 62 impala. Check it out
The firewall and ac vent holes look awesome! I'm looking to do the same thing on my 64. Did you use a hole saw to cut out the holes for the vents? Did you use the cover that came with the vintage air for the firewall? The ac kit I bought was for an impala with ac so the firewall cover is different from a non ac car. You guys do great work!
i noticed you guys didn’t cut out the bolt holes for Emergency brake? did he just choose to not put that back in . with that style of E brake even work with disk brakes? i plan to upgrade to all disk . so should i not put the E brake back in either?
when u cut out speaker screen on dash did u guys also weld in the holes for the dash pad? do u just make circles with metal and weld in flush then just body work? i would like to eliminate dash pad as well?
Red raptor liner for the bottom is that similar to rattle can paint for the bottom of body??? I’m debating weather to paint mine same color of car or use rattle can cause Vegas gets hot.
Raptor liner is similar to bedliner or under coating. I believe it is a 2 part and mixes with a harderner. Rattle can spray paint will not produce the results you are after. They sell rubberized under coating in a rattle can. Ive used before. From eastwood. Works good but cant be tinted. I believe raptor liner tints using the actual base coat paint. Look into it. Kits come with guns to spray. Personally never used it but i plan to in future. Painted floor pans is more for show cars...where i live. It wouldnt hold up 100 miles
Thats a ton of bodywork, tons of hours gone in to hardly noticed things that the un trained eye won't catch. I like how he has mocked up the frame to body and trunk and all that. So many people dont even bother to do that. and try to mend it later.
Lone star :
Tell your buddy he did a hell of a job. The hrs are no joke for those who have done and care about every detail. The 6L80E info given is worth it's weight in gold to me......at least now I see what I'm in for. That info is very hard to come by. Hopefully you guys can share your LS mounting strategy.....motor mounts, oil pan , headers etc.
Awesome video!!
Thanks so much guys!......And good luck on the paint!!!
James. Great. Whole point of my videos. I told him i waa going to interview him and at first it was a joke. But it was fun! We will do one for the chassis too . stayed tuned
@@lonestarlows , that was Awesome!👍🏼 Thank you for the knowledge Brother!
@@paulrm_7917 cool.
Man incredible work I can't wait to see the end result congratulations on what you have accomplished so far
Yessir thanks for watching
"Ready for paint" The understatement of the century.
"Rust in the usual placed but body is straight"
That’s one hell of a job for sure!!! Your buddy did awesome!!! I’m doing an LS as well and info is hard to come by at times. I’m going with a LS2 or 3 with a 4l60 or 4l80 for reason being it should fit without any mods in the tunnel. BRP muscle rods I have heard are great mounts but they cost way to much. Keep the videos coming. Thanks again!!!
Ive never done an LS conversion but will probably try it on my 61
Thats bad ass homie! Your buddy got maddd skills!
Badass sick work
I remember when we used to have lowrider talk
We still can junior
Bad ass! I’m building one with the same moon roof I’m currently doing the headliner real headache I’ve redone in once and still not happy
Ive done headliner w 44. I didnt do the vynil withthe bows. I did a fabric headliner. Came out good. Its on a video i uploaded showing a 62 impala. Check it out
The firewall and ac vent holes look awesome! I'm looking to do the same thing on my 64. Did you use a hole saw to cut out the holes for the vents? Did you use the cover that came with the vintage air for the firewall? The ac kit I bought was for an impala with ac so the firewall cover is different from a non ac car. You guys do great work!
Can u put the holes for the vintage air where the fan motor goes? That way u can run the ac lines under the fender & over the wheel well.....
Ive honestly never done that but i dont see why not...something to look into
i noticed you guys didn’t cut out the bolt holes for Emergency brake? did he just choose to not put that back in . with that style of E brake even work with disk brakes? i plan to upgrade to all disk . so should i not put the E brake back in either?
Yes u can run factory e brake pedal on rear disc conversions. I believe he is going with an electric e brake setup
lastly is the New port motor . use same exact holes as the stock wiper motor?
Yes
when u cut out speaker screen on dash did u guys also weld in the holes for the dash pad? do u just make circles with metal and weld in flush then just body work? i would like to eliminate dash pad as well?
I dont think he car came with a dash pad. Not all cars have them
Is there certain demensions were the vintage air holes need to be drilled ?
I think the template comes w kit
Wtf is up with the wind lol good shoot tho
Red raptor liner for the bottom is that similar to rattle can paint for the bottom of body??? I’m debating weather to paint mine same color of car or use rattle can cause Vegas gets hot.
Raptor liner is similar to bedliner or under coating. I believe it is a 2 part and mixes with a harderner. Rattle can spray paint will not produce the results you are after. They sell rubberized under coating in a rattle can. Ive used before. From eastwood. Works good but cant be tinted. I believe raptor liner tints using the actual base coat paint. Look into it. Kits come with guns to spray. Personally never used it but i plan to in future. Painted floor pans is more for show cars...where i live. It wouldnt hold up 100 miles
Ps. I like vegas. I can shoot craps 8 hours straight lol
Did your buddy media blast the bottom then primer it or what process did he use before using the raptor liner???
Wire wheel...flap disc...hand scrape....spi epoxy...then raptor..
Can you ask your buddy about how many liters he thinks he used on just the bottom of the body of raptor liner???
👍🏾💪🏾👊🏾😎🇲🇽🍻🍺
😎
Thats a ton of bodywork, tons of hours gone in to hardly noticed things that the un trained eye won't catch. I like how he has mocked up the frame to body and trunk and all that. So many people dont even bother to do that. and try to mend it later.
I really like the molded dash. And front body mounts