Thank you :-) I have noticed that each batch of jesmonite is different so sometimes bobbles are a huge problem, others its just fine. In general I don't use the 1x2,5 ratio ever. its too thick and hard to work with. I talked to the danish distributor and they agree that the quality for each batch they buy, vary in quality and its a problem. not sure what can be done about it.
Thank you so much🥰 I use the jesmonite acrylic sealer deluted in water 20-80 ratio. I dip the whole thing once sanded down but before it is dried. I wipe with a table cloth, let it sit for min and dip again. Dry off with table cloth. Let dry completely. No brush marks etc 😉 on items that need to hold water like soap dish I dip 3-5 times same procedure.
@@Galleri-Mindedahl Thank you so much for this video! A true live saver, I also found the 2.5:1 ration too high and it's too thick to work with. The acrylic sealer... you use 20% sealer and 80% water? Do you have a video on that too?
@@jannekelouwes9780 Hi there. Yes its usually 20% sealer and 80% water. I dip from 1-3 times with drying in between if it really needs to be super water proof.
Det lyder rigtig godt med en anden ratio end 1:2,5 😘 Hvor meget ændrer det på arbejdstiden og hærdetiden ? Og er produktet ligeså stærkt som normalt ? På forhånd tak for svar 🥰
Hejsa. Det har ingen betydning så længe du ikke demolder for tidligt. Det er lige så stærk som normalt og opfører sig ens. Jeg har ca 20 min til håndtering uden retarder
Thank you for sharing your technique with us! This is the best how to video I have ever seen. ♥️
Wow👌🏼one of the very best videos on Jesmonite I’ve seen and I have watched literally 100’s. Thanks👏🏼👏🏼
Thank you :-) I have noticed that each batch of jesmonite is different so sometimes bobbles are a huge problem, others its just fine. In general I don't use the 1x2,5 ratio ever. its too thick and hard to work with. I talked to the danish distributor and they agree that the quality for each batch they buy, vary in quality and its a problem. not sure what can be done about it.
Merci beaucoup pour cette astuce !! 😉🙏
Thank you so much for sharing your methods with us! ♥️♥️🇦🇺
❤Perfect work! ❤️
It looks flawless! 😮
I will definitely try the alcohol for bubbles! Thank you
Let me know if it works out☺️
I have a dentist vibrating unit. It's small for plaster teeth casting without bubbles
great video! thank you very much :) how do you clean your equipment after mixing the mass?
Hi. This video is brilliant. I have seen so many videos but nothing was this clear. I would like to know what sealers you use and how do you do it.❤
Thank you so much🥰 I use the jesmonite acrylic sealer deluted in water 20-80 ratio. I dip the whole thing once sanded down but before it is dried. I wipe with a table cloth, let it sit for min and dip again. Dry off with table cloth. Let dry completely. No brush marks etc 😉 on items that need to hold water like soap dish I dip 3-5 times same procedure.
@@Galleri-Mindedahl Thank you so much for this video! A true live saver, I also found the 2.5:1 ration too high and it's too thick to work with. The acrylic sealer... you use 20% sealer and 80% water? Do you have a video on that too?
@@jannekelouwes9780 Hi there. Yes its usually 20% sealer and 80% water. I dip from 1-3 times with drying in between if it really needs to be super water proof.
Do you leave the jesmonite resting for a while before pouring?
Hi. How long do you leave it until you de-mould?
Hi there. Depends on the outside temp, how much pigment I added and the quality of the jesmonite batch. But anything between 45-60 minutes ☺️
Det lyder rigtig godt med en anden ratio end 1:2,5 😘 Hvor meget ændrer det på arbejdstiden og hærdetiden ? Og er produktet ligeså stærkt som normalt ? På forhånd tak for svar 🥰
Hejsa. Det har ingen betydning så længe du ikke demolder for tidligt. Det er lige så stærk som normalt og opfører sig ens. Jeg har ca 20 min til håndtering uden retarder
1000 tak for instruktion, for en totalt nybegynder, kan du så forklare hvad det er jeg skal købe ? altså væske og pulver ...@@Galleri-Mindedahl
I usually have a white spots even if I mix it with mixer , what should I do ?
I highly recommend using a jesmonite mixing blade and the full speed for couple of minutes. It will turn silky smooth I promise its worth the cost
Thank you for your great video, can I use a vibrator table to get rid of bubbles?
Probably, i tried it but it didnt work for me
❤😂🎉😊