I think this is not correct. No need to subtract anything.. Apply the load and wait 10 sec. remove the load and find out the hardness directly. That s it.. Pls don't follow this.
@@Pageskeptunturned you described in your vedio that small circle in the dial as C scale. That is not at all a scale , that is an indication for a minor load to fix the intender and the job. In this dial when the pointer reaches the red point it is meaning a 10 kg load is applied , that is to fix the material to the intender. C scale outer most black dial with diamond indender with 150 kg load. As you mentioned no difference in reading is not to be calculated the final position after releasing the load is the reading. HRc _ 150 kg diamond indendet HRb_100kg load steel ball indender HRa_60kg load diamond indender.
final reading 103 or 93 please check & confirmed?
Brass having only 15HRB??? Please cross check your procedure... Small Dail indicates primary load around 10 kg but said that it is C scale..
She described wrong method.
Ye HRC ka readings liya Ya HRB describe this
Mam pls explain dial indicator
How repare /Avoid Varriation SUch as HRC=58.9 And reading is 61,65,70,
She is gorgeous... Southern Indian girls are simply amazing without any makeup
Parama padi da
@@arshan3217😂😂
But she described wrong method.
How you set 100 kg load
What based we need to set the load..?
That is given to the machine surface
#very beatiful mam
nice video ..thank you for the information
I think this is not correct. No need to subtract anything.. Apply the load and wait 10 sec. remove the load and find out the hardness directly. That s it.. Pls don't follow this.
Yeah i sensed something strange too
This video should be removed.
Yes
Mam how many types of hardness test..
Macro and micro
In macro- rockwell, brinell, vickers
In micro-knoop diamond, vickers diamond pyramid
3 types
A 30 sec dwell time is allowed in Rockwell testing????? As per which standard the test is carried out??
Ok
How much machine cost? From Where I can buy
Hello friend,We are Manufacturer of Testing equipment ,Please contact me if you need .Email:2851889929@dgkj17.com
@@mikel9514 give me your contact no
My no is 7017191961
@@DeepakChauhan-rf9so bhai do not share your personal information publicly plz.
Thank you ma,am
Maal tyte hi yaar
Thank You for Good Teaching
She described wrong method. Don't follow this process.
Tq mam understood neatly
Are you malayali?
Very nice
good!
Superb mam
you are fresher plz do homework properly or learn from better teacher
NYC video tq 💓
nice
अतिसुंदर
Myrenta karyam 🤦2 aksharam padikanda bengalu
Thanks madam
Kya madam kitna wrong information Diya h
brinne hardnes????
ruclips.net/video/KO3pDj03ENw/видео.html
10.9
Smart and cute :)
8.8
Very very wrong information.I think you do not know any thing about hardness tester .Please do not fool us.
@@Pageskeptunturned you described in your vedio that small circle in the dial as C scale.
That is not at all a scale , that is an indication for a minor load to fix the intender and the job. In this dial when the pointer reaches the red point it is meaning a 10 kg load is applied , that is to fix the material to the intender. C scale outer most black dial with diamond indender with 150 kg load. As you mentioned no difference in reading is not to be calculated the final position after releasing the load is the reading.
HRc _ 150 kg diamond indendet
HRb_100kg load steel ball indender
HRa_60kg load diamond indender.
Beautiful woman
I think she is your sister
@@111_vijaymanickam5 😎
Abe sale ise liye hi tuje backlog aaya hai.
What you saying you know
Pls you learn deatils , then describe
Voice was not clean
Not as per standard....dont follow these peocedure....