Great video. Thanks for clearing that up. Next question: Which channel is set to Rudder, Throttle, Ailerons and Elevator on the receiver, after it is binded?
I have received this earlier this week and it was working fine until the throttle just stopped working. After I turn off the receiver, I have to re-bind it every time. Is there a fix to this? or do you think it is just a bad receiver.
1ch - aileron1, 2ch - elevator, 3ch - esc with motor and battery, 4ch - ruder, 5ch - aileron2. but in transmitter setting you need to setup flaperons for aileron2 working, or use a Y servo lead
I just received mine. I don't recall seeing a channel 9 or 10 on the receiver. I believe mine just had 8 channels plus the battery. Hey is that the Hobbyking cutting mat?
Thanks for the video! Noticed that on the V2, Bind is printed above Channel 10 and Bat is on Channel 9. Is this just really bad usability/design? how did you discover that Channel 9 was Bind and Channel 10 was batt?
@tompuch49 You dont really need this battery. Just plug in your ESC to channel 3, your bind plug on channel 9 and connect your battery to your ESC, does the same thing.
OK...got two receivers 'bound'. The elevator, aileron and rudder channels respond to the Transmitter, but the throttle does nothing. I am able to run the same motor when I connect another known to be working ESC as long as I use my old Dynam receiver and TX. Is there some trick to getting the throttle to work with the T9X??
@Ixtocaltro I consider the best value on the market today. It's a good radio with a great price. ($ 60 for a 9-channel radio). It is the best radio in the world? No, but radio is a lot better than the price might make you think. I have two.
I bought one of these also came with ELEV and channel problem, a great sensitivity in stik. Still not sure how to solve, including the programming and I tried did not work, I think it might be the potentiometer, you have idea how to solve this? Thank you.
im so confused...the sticker on your receiver says that the bind should be in channel 10 and the battery should be connected to channel 9...but you put the bind chord in 9 and the battery in 10.....why do you do that?
I bound the receiver to the remote as said/shown and it responded just as in the video. Once i plug the servo in the first channel and turn both receiver and remote the servo acts weird and is moving the axis back and forth. A person i know plugged it into his receiver and it worked normally. No idea what I'm doing wrong.
@tompuch49 Battery packs from 5V to 6V with the appropriate connector to the receiver and with great attention to polarity. What would you use battery pack to power a receiver in a model airplane powered combustion engine? It is the same. Check on your favorite hobby shop.
I'd never had guessed it worked that way. Great vid, great soundtrack, too.
Danke für das gut verständliche Video!...hat mir sehr geholfen.
muito bom!dindei o meu seguindo suas orientações.muito prático.obrigado!
Great video. Thanks for clearing that up. Next question: Which channel is set to Rudder, Throttle, Ailerons and Elevator on the receiver, after it is binded?
I received mine today! very satisfied
Sweet music and great video! Thanks.
I have received this earlier this week and it was working fine until the throttle just stopped working. After I turn off the receiver, I have to re-bind it every time. Is there a fix to this? or do you think it is just a bad receiver.
How good is that Tx and Rx, do you recommend it? Thanks for your comments.
1ch - aileron1, 2ch - elevator, 3ch - esc with motor and battery, 4ch - ruder,
5ch - aileron2. but in transmitter setting you need to setup flaperons for aileron2 working, or use a Y servo lead
Thanks so much. It worked. I was so desperate for help.
I just received mine. I don't recall seeing a channel 9 or 10 on the receiver. I believe mine just had 8 channels plus the battery.
Hey is that the Hobbyking cutting mat?
Great JOB, simple and easy
Thanks for the video!
Noticed that on the V2, Bind is printed above Channel 10 and Bat is on Channel 9.
Is this just really bad usability/design?
how did you discover that Channel 9 was Bind and Channel 10 was batt?
Very helpfull, thanks a lot for sharing...
@tompuch49 You dont really need this battery. Just plug in your ESC to channel 3, your bind plug on channel 9 and connect your battery to your ESC, does the same thing.
OK...got two receivers 'bound'. The elevator, aileron and rudder channels respond to the Transmitter, but the throttle does nothing. I am able to run the same motor when I connect another known to be working ESC as long as I use my old Dynam receiver and TX. Is there some trick to getting the throttle to work with the T9X??
@Ixtocaltro I consider the best value on the market today. It's a good radio with a great price. ($ 60 for a 9-channel radio). It is the best radio in the world? No, but radio is a lot better than the price might make you think. I have two.
Thanks bud. Works perfect.
I bought one of these also came with ELEV and channel problem, a great sensitivity in stik. Still not sure how to solve, including the programming and I tried did not work, I think it might be the potentiometer, you have idea how to solve this? Thank you.
thank you it was realy helpful.
muito bom.me ajudou muito.
Does the plug bind come in the turnigy 9x kit from hobby king? can i use a bind plug from a hobby king 6channel v2?
Will the receiver pack be included or is it needed to be bought?
im so confused...the sticker on your receiver says that the bind should be in channel 10 and the battery should be connected to channel 9...but you put the bind chord in 9 and the battery in 10.....why do you do that?
Thanks for help!
I'd like to use two receivers simultaneously. Can I bind one Turnigy 9X transmitter to the two receivers?
only works with this receiver or work also with some FBL systems? like 3gx?!
Cheers for the video, it helped me out thanks! :)
I want to use two receivers simultaneously. Can I bind the Turnigy 9x to two receivers?
good video
@Athensbashing Good news!
I bound the receiver to the remote as said/shown and it responded just as in the video. Once i plug the servo in the first channel and turn both receiver and remote the servo acts weird and is moving the axis back and forth. A person i know plugged it into his receiver and it worked normally. No idea what I'm doing wrong.
@TheJulianobatera
Welcome.
thx
@pustagrilla
Welcome, disponha.
@tompuch49 Battery packs from 5V to 6V with the appropriate connector to the receiver and with great attention to polarity. What would you use battery pack to power a receiver in a model airplane powered combustion engine? It is the same.
Check on your favorite hobby shop.
is it a Tag Heuer F1 ?
Usefull vid by the way !!
@yumaokamoto Hard to say, it can even be electrical power problem
@frankynathanael Thank you.
@mupsilaama It restarts the cycle of channels.
thanks, you help me
@frozentrone31 Disponha.
they are labeled