Ive enabled grid peak shaving at 1500w around 5PM, my total load was around 2.5kv, still it used from battery and solar and didnt use grid, what should i do enable using grid during times when there is lees solar power cause i dont want to drain my battery so much or give too much stress at evening time, also i wanted to know if there was any way of using battery charge only when grid cuts off! like inverter mode, i dont mind using the grid to feed in my household, i need battery usage only when grid goes off, help help!
Hello, If we are selling power to EB(i.e of solar net meter installed)in galaxy 6g inverter if mains power fail, will the inverter still generate current from panel and battery? Or will it use only battery power and stop generating power from solar module.. do I have to addicro in enters for direct solar genration during power failure?
thankyou for the detailed explanation :) ! just ordered galaxy 6g 12kv inverter. I didn't understand what ZERO EXPORT TO LOAD does? and do we have to pull a separate line for DB for smart load to function? ps: are your electric bills getting reduced? by how much
Zero export works to stop the exporting of current if you have not install bidirectional meter Yes, I pull separate line for smart load Still my bidirectional meter not install yet, because of power corporation
Battery voltage ko hamesha volt pe rakho, kyunki lead acid battery ki percentage ko yeh inverter sahi se read nahi karta aur battery mein charge hone pe bhi percentage 0% dikha deta hai isliye volt mein rakho, Aur inverter shutdown ki limit 42 volt kar do phir band nahi hoga
I'm sorry 2 say that you described battery setting totally wrong. You are Confused about Float Charge, Absorption Charge, Bulk Charge. Please remove this part from Vlog, study again, edit this part of vlog and please publish it again. Thank you.
Can you DM me your contact? I want to discuss my problem with you and take advice. I have 3x5kv Cellcronic 6G inverters and I am having issue in usage of smart load.
Good knowledge bhi
Bahut ache se samjha tnx
Yeee best Inverter hain... Mera vi iccha hain ye install karne ka..☺️☺️☺️ avi smarten Superb 2500va use kr raha hun ..
Nice explanation
Good Bro Clear information ,👌
Thank you so much 🙂
Thanks for inf
Bro aap 150ah battery use kr rhe h, full charge par kitne unit ka backup deti h
very nice.... much needed video brother
अभी कैसा चल रहा हैं?
I have celconic 3 klwatts model in house but night after power cut it 'll not backup my house load
You can schedule the backup like how much battery use till night 10pm
how...? plz send your what's app no
Ive enabled grid peak shaving at 1500w around 5PM, my total load was around 2.5kv, still it used from battery and solar and didnt use grid, what should i do enable using grid during times when there is lees solar power cause i dont want to drain my battery so much or give too much stress at evening time, also i wanted to know if there was any way of using battery charge only when grid cuts off! like inverter mode, i dont mind using the grid to feed in my household, i need battery usage only when grid goes off, help help!
Disable the grid peak saving
Hello, If we are selling power to EB(i.e of solar net meter installed)in galaxy 6g inverter if mains power fail, will the inverter still generate current from panel and battery? Or will it use only battery power and stop generating power from solar module.. do I have to addicro in enters for direct solar genration during power failure?
Yes, it generate power from solar panel still after power failure
Have u installed bidirectional meter?
Yes
@@Randhirful can u show a video how your ct meter installed? When I installed my CT, the list just shot up to 10.5 kV.. any idea?
F26 falt kya hota hai
battery mein kitne mm ka wire use karein
20mm
What is variable Induction load used there on your side?
Just double, this is 5 kw and variable load is 10kw
@@Randhirful
Thank you for prompt response!
I would watch it over again, then would comment.
Kitne pannel se start kr sakte hai
4 panel se
Company Sahi nahin hai Sahi hoti to Apne video per comment off nahin karti
can it ON without battary ?
Yes
Sir battery ka power off karne ke bad ac out put kyo nh deta hsi
Battery ka power on karne pe ac out put hone lagta hsi yesh kyohota hsi
Battery primary source hai , disconnect karne se power chala jayega lekin agar sunlight hai to thodi der mein power aa jayega
thankyou for the detailed explanation :) ! just ordered galaxy 6g 12kv inverter.
I didn't understand what ZERO EXPORT TO LOAD does?
and do we have to pull a separate line for DB for smart load to function?
ps: are your electric bills getting reduced? by how much
Zero export works to stop the exporting of current if you have not install bidirectional meter
Yes, I pull separate line for smart load
Still my bidirectional meter not install yet, because of power corporation
@@Randhirful could u share your contact, I've just installed my galaxy 6g, I have a doubt about this inverter
What price do you paid for that?????
You didn't mention which direction the 'ARROW' of the 'split CT Transformer'was set to with regard to the Grid in main AC DB of the system.
Aap bifacial solar panel lagao
Abhi 2 panel ka space hai mere paas , usme bifacial hi lagaunga
Nexus ka lagao
loom ka hi lagao bificial me use kar raha hu
january me bhi acchi generation hai
Good
Cellcronic power wall ki vidio banae
Sir mere paas abhi power wall nahi hai, aayegi to jarur banaunga
ruclips.net/video/fJ-hf6Q1WLg/видео.html
Powerwall bahut costly h abhi 2lakh
Yes
@@AshokKumar-nn6sd 180000
ग्रिड कट करने के बाद काम करेगा भाई जी
Yes , mera grid 2 mahine se cut hai
Aap ne kanha pe use kiya h ye inverter home ya shop. Or warranty kitni mili h aap ko is ki
Home mein kiya hai, 5 year warranty hai
@@Randhirful can you provide me your mobile number.
5 years ka chahiye aapko
क्या ग्रिड 24 घंटे बंद कर सकते हैं
Haan kar sakte hai
sir mere inverter m inverter button on h fir bi inverter power nai nikal raha h or off likha aa raha h
Power button kharab hai, usko change karwa lo
Celcronic galaxy 6g 5kw inverter SMART LOAD function not work, how to solve this problem
Check smart load MCB or check smart load MCB connection
Price kitna hai bhai
120000
@@Randhirful
With discount
Or
Without discount ??
With discount , without discount is 125000
@@Randhirful
4% discount
Parches kaha se karen online link send.
Please
Bhai shaab Bettry voltages ko percentage per set krte hi system off ho gya
Battery voltage ko hamesha volt pe rakho, kyunki lead acid battery ki percentage ko yeh inverter sahi se read nahi karta aur battery mein charge hone pe bhi percentage 0% dikha deta hai isliye volt mein rakho,
Aur inverter shutdown ki limit 42 volt kar do phir band nahi hoga
@@Randhirful धन्यवाद सर आपका कोई टेलीग्राम लिंक है तो बता सकते हो तो हेल्प करदो .. we support you and your channel
Sir installing video do
ruclips.net/video/1Ie6cmVl_OE/видео.html
Screen touch not working while electricity given to it
May be its issue, because in my everything working fine
I'm sorry 2 say that you described battery setting totally wrong. You are Confused about Float Charge, Absorption Charge, Bulk Charge. Please remove this part from Vlog, study again, edit this part of vlog and please publish it again. Thank you.
Sir only absorption mode ko thik se explain nahi kiya baki sab sahi bataya hai aap phir se suniye float hamesha 80-90% ke baad hota hai
Total cost of project ???
Around 4 lakh
@@Randhirful roi kabtak hoga lag raha he ??? 4 lakh investment ka return hote hote bohat time lag jayega
Can you DM me your contact? I want to discuss my problem with you and take advice. I have 3x5kv Cellcronic 6G inverters and I am having issue in usage of smart load.