How to Make a Silver Ring Shank - DIY
HTML-код
- Опубликовано: 6 окт 2024
- Learn how to make a silver ring shank with seasoned jewelry John Hartman of Durango Silver Company. In this Jewelry DIY video John will show you a few different ways to make a three prong or split shank ring band. In this detailed video John will show you many of the tricks and tips he has learn throughout his career. Enjoy.
If you enjoyed this How to Make Silver Jewelry video please give us a thumbs up and like this video.
Subscribe to the Durango Silver Company channel for more Jewelry DIY videos.
#durangosilver #howtovideo
Visit us at www.durangosil... for more free information, turquoise mines list, cabochons, and jewelry.
How to bezel set a cabochon ( DIY )
• How to bezel set a cab...
How to make a bezel setting ( DIY )
• How to make a bezel se...
How to Make a Bezel Setting - Adding a Cable or Rope Design
• How to Make a Bezel Se...
Hello from Cape Town, South Africa. I've been out of jewellery making for about 15 years and have stepped back into a craft I love, especially silversmith's work. I stumbled up in your videos while looking to refresh my mind. As they say , it's like getting back on a bicycle. Your videos have been very refreshing and I especially love learning again from an experienced gentleman as yourself. Thank you so much and all the very best to you.
Can't stop watching videos, soooo need to go to bed but they are so informative and hard to stop watching!
Thank you for your video! I'm in a metals class right now and the teacher just makes us take notes and then were left on our own. This is nice to come back to and your very clear with your instructions. Thank you!
John you’re the best!!! I’m going to try to make this ring shank, hopefully for my next project, thanks for sharing your expertise 😊
i like the way u let us look rather than just watch
Wow I've learned more today watching your videos than a years worth of others on here. So glad I found your channel!!! Thanks so much!
YUREKA!!!...how fortunate for me that i found you and this video tutorial!...this shank has eluded me for so long and you have taken the mystery out of the equation and i can now (with confidence), create this shank for my large rings that have been begging for such beautiful bands like this!...thank you for sharing and i am now a subscriber, i am so grateful...
I appreciate the tutorial and sharing your talents with me 💙😁
Thank you so much for making this series
I'm binging on your videos John. I have learned so much from you. I can teach you how to cook as a trade.😀
Another great video with a wealth of information. Thanks so much!
You explain things very well. 👍 Anyone can learn a lot from you. Thanks!
Lol! You love that handy dandy sanding machine!
I will definitely buy one!
Thank you again Big John!!!
Your the best teacher for certain, Cory
Thank you so much!! The most helpful video and so many tips 🙏👍👍👍💜
Yep, I'll be watching you for days... ! I love the tools and the ease of saving time and money. I learn as much watching you share your shop as I do listening to your tips!
Thank you for sharing your wisdom, Love your videos
Thanks so much for your video. It definitely has helped me figure out some issues on how to do these types of ring shanks. ;)
thank you for watching. glad we could help
muchas muchaS muchas gracias por compartir aprendo mucho de usted cariño desde Perú
HAHAHA - I found/watched this video after I made my first three prong ring with a flattened half round wire and indeed had a squiggly line from sawing straight up and down. I had a heck of a time truing the prongs up to my liking. The next one will be better, now that you showed me how to saw the prongs so my line is straight. This metalsmithing is a series mistakes (I laugh at almost every one because I'm always so surprised) followed by successes - so..... life as I know it. Anyway - THANK YOU FOR YOUR VIDEOS.
Oh my gosh, just stumbled into you guys and I love these videos, thank you! I've been teaching myself metalsmithing for a few months (after being a wire wrapping artist for a few years) and these are so thorough and he really is very pleasant to watch. Makes me smile! My new favorite!
Thanks for the video! I like your spirit too 😅
Excellent video! Thank you!
Great video. Thank you!
Any idea where I can find the measuring guide for the rings/bracelets? That ruler is awesome!!
I've been searching too. Seems they don't make them now.
I was just about to ask that same question. Rio Grande has a yellow ruler they sell but I don’t think it’s the same thing. I think it’s for a fully closed ring. So the search continues
Thank you excellent clear instructions.
Love your videos.
Great videos John.
Thank you, excellent video!!
Great video John, I will definitely put your lesson to use in my jewelry making. Thank you for the video.
Thank you so much for you.
Thank you so much for your video! I loved it, I'll be looking for more.
Mr. Hartman what is the name and make of your drumel machine. P & T. Always enjoy your videos and the information you provide.
Great video, thanks John. I'm a beginner and about to make my first split shank so this video has really helped. If I were to just cut the shank into two (rather than three as shown in one of your examples) would I need to make any alterations to your method, less hammering to flatten for example? Thank you 😊
Wonderful video, thank you. The final result that you are showing at the end, which one is it? The shank made out of the 16 gauge sheet? Or the one made out of the 6 gauge half round wire?
I'm pretty sure its thee 6 gauge half round, but I wondered why he did both to start with if he wasn't doing both.
Fantastic!
Where do I find the jewelers ruler tool?
John,i think your sander needs a bigger motor,lol.
Great video! Where did you get the small dividers? Thanks for sharing your knowledge!
Those small dividers came from my dad. He was a machinist. I think they are from the 1940's.
You're putting me to sleep John. LOL!
Love your method of teaching. Very informative and considerate of your audience. I was also wanting to know the different gauge of sheet metal for the different size cabs for rings? Does this standard also go for pendants as well? Thanks for sharing 😊
Thank you so much. So, everyone does something different when it comes to building jewelry. I have my preferences I have built over the years. I like to gauge how thick of sheet I will use by the size of the stone and the feel of the piece I am making. In general, for most standard bezel rings, bracelets, and rings, with an average size stone, say from 10 mm to 24 mm large, I like to use 24 gauge sheet. When I am making a heavy weight bezel piece I use 22 - 20 gauge sheet. When making earrings I like to use 26 to 28 gauge sheet to keep the setting lightweight. General rule of thumb, the larger the stone, the thicker the sheet. I hope this kinda answers your question.
Turquoise Jewelry | Durango Silver Company Thanks it did answer my question. I’m new to making jewelry using soldering so this helps. I started with wire wrapping and weaving. Looking forward to your next video! Maybe something showing how you embellish when you design.
@@kay0816ify Hi. I started with wire wrapping too and have recently started learning more about being a bench jeweler. I suppose that's the usual progression for anyone who enjoys this kind of hobby. I find it very fascinating and so glad I found this channel. He has so much experience and is great at teaching. Best wishes on your jewelry making quest! 🙂
tammygurl64 😊 Best of luck to you as well.
great !!!! for a beginner is better to use a ring bender ?
I’m sorry but I missed something. Did you make the shank out of the 6gauge wire or from the piece of sheet? I don’t understand what I missed. Your videos are awesome!! @DURANGO SILVER COMPANY
Put the mike under your chin. I love your videos
What gauge for the shank?
Love the video!!
I love you😘
Now! how do u solder it?
Love the content, just hard to hear everything he is saying, keep up the good work!
Thank you so much for these, they are great!
Does anyone know the name of the ring ruler template he has? I don't think he said what it was called
No but I would like to know.
If you stop the video. It says Indian Jewelers Supply on it.
Please turn Up the Volume on your camera, so I can Hear you
turn the gas off and and than release the gases in hoses , otherwise your hose will deteriate and you end up with a fire or an explosion and that can happen anytime the chemistry of the gas in the hoses will eat the rubber of the hoses ..... ( ,,from experinced weldor :a welder is a machine but a weldor is a welding machine operator Super important safty !) learned that in PIT provincial institute of trades college in the 60s toronto on. can.
When you bend the ring with the half-round pliers, doesn't the metal get marred? If so, how do you minimize the marring?
Usually we use half round pliers to get a better grip. You can use round wires, but when working with thicker heavier materials they really do not work well. So the trick is to use the round side on the section of metal you do not want to mare. Use the square side on the section of metal you plan to sand and buff.
@@DurangoSilver Ahh, that makes sense, I didn't think about that. Thanks ;)
Why did we make the other shank where did it go
I like you 😊
I'm in love with your sanding machine, can I ask what it's called or where I can look for one? And thank you for such a great video on split shanks. Much appreciated.
It's a belt sander and you can buy them at Harbor Freight or Home Depot. I bought mine from Harbor Freight and it was about $50
The devil is in the details with jewelry, while handmade stuff can have minute errors, it can still be perfected with small enough files, tools, attention to detail, and precision. Though it's acceptable to have imperfections, always strive for perfection when you make things that cost money. You will only get better and better.
I use to have that ruler with the open and close ring shank scale and now no one sells them I have looked all over you can find a regular one but it does not have the open ring shank scale on it can anyone tell me where to get one.
What grit are you using on your sanding machine? thanks
John, I just bought one of your rings from Durango Silver, 7 days ago, and the ring bent. The shank seems like it is too thin? What should I do?
Are you using .925 SS for everything, including the bezel strip?
The bezel strips are genuinely .999 fine silver for southwest style and I believe I heard John say he does the same. Don't quote me though.
Half Round wire looks like 4 gauge - 6 gauge?
6 gauge on this one
I need a job.......
Gee...where do you think I can buy the dividers?
Riogrande.com
Learn how to make a silver turquoise ring at the Plaster of Paris.
One of my "mentors" who is just about to retire said to me today when I mentioned, "Even after 12 years of SERIOUS study and self-teaching (there are no teachers or schools here where I am) I still have so many questions and hardly anyone wants to share the real stuff (info)". His answer: "Well nobody told me anything, you just have to figure it out". So I have piles of buffs and various compounds and have no idea how to use which with what. Even Rio won't tell you, They say: Well, they are great for different things, find what works for you..." (Sell sell sell...). Your video here just leapfrogged me towards success. And believe me, I am chucking the shitty dry crumbly greasy Rio "Tripoli" in the bin! One question please, after a million thanks; which exact buff are you using on the right side (wheel) of the rouge buffer, for the Zam rouge? It's the neon green-looking one. I am so happy to have found your channel - believe me, I've been looking for the real working info - for 100 years!
The ring shank is made up of 16 gauge what? Silver?
ha ha....vry funny
u got 26 minute for dis type of small work........
Yep. We are trying to teach people that DO NOT know how to make jewelry. We are not trying to show off or to teach jewelers that already know how to make jewelry. Thank you for your input and opinion.
@@DurangoSilver I've been working with silver, cutting my own cabs from slab and smaller rough stones, and mounting cabs for both pendants and rings since 2016. I was shown some basics by a master jeweler who has his own shop, and I learned a tremendous amount, but just watching John work, and listening to his constant stream of tips and tricks has proved to be amazingly valuable to me. Thanks John and Dillon, for taking the time to share your skills and tips... and to offer them in a manner that just about anyone can easily understand. John, you're a natural teacher! I'm already using many of those tips in my work, and getting an order ready for some tools you've shown which are absolutely invaluable. I primarily use Rio Grande for my supplies, and cannot begin to thank you enough for offering the stock numbers for each of those items which you use. It's made it very easy to obtain exactly what I need. What about making a video about adding small embellishments to rings and pendants? Perhaps consider something about adding those side skirts to ring shanks that make them so unique and look so great. Possibly also something about adding small cast elements such as feathers, leaves, or raindrops in various combinations... to show how designing ideas can be derived while sitting at the bench. Thanks again!