You may want to look in the proper AIM (Assembly Instruction Manual). I bought this manual as well as the other two shop manuals and they have a bunch of info in them. Yep, a video might have been nice but my camera had higher resolution on still shots than on video. Also too maybe look at these photo's in which you can see in a higher resolution: www.flickr.com/photos/121766713@N04/albums/72157649646999993
How do you get the filler panel and reinforcement piece in place without bending the little tab that fits behind the fender? I've turned it this way and that. I don't want to take a fender off if I can avoid it.
I am good friends with Penn from Penn and Teller and he owed me a favor and took care of me.............No, I did have to bend something and I cannot remember what to sneak mine in and if I remember right I took the diagonal round stock bars off for some reason either to clean them or give me more room but I just cannot remember all of the specifics, All I know I did not have to remove the fender nor take anything major apart. I think this picture might help as I believe this is the one end I bent down to get things out and then once back in, bent it flat again ?. I just cannot remember. live.staticflickr.com/8698/17189556245_4161052e07_b.jpg Also too, here is an album with the still shows which you can click on and enlarge better than the ones on the youtube video. www.flickr.com/photos/121766713@N04/albums/72157649646999993/with/17189556245/ Jim
I like the photos but a video would be nice because I removed mine a year ago and cant remember the exact bolt placement, thanks for sharing it helps
You may want to look in the proper AIM (Assembly Instruction Manual). I bought this manual as well as the other two shop manuals and they have a bunch of info in them. Yep, a video might have been nice but my camera had higher resolution on still shots than on video. Also too maybe look at these photo's in which you can see in a higher resolution: www.flickr.com/photos/121766713@N04/albums/72157649646999993
i need this part so bad for my 72 nova... but in venezuela is just imposible to get :(
How do you get the filler panel and reinforcement piece in place without bending the little tab that fits behind the fender? I've turned it this way and that. I don't want to take a fender off if I can avoid it.
I am good friends with Penn from Penn and Teller and he owed me a favor and took care of me.............No, I did have to bend something and I cannot remember what to sneak mine in and if I remember right I took the diagonal round stock bars off for some reason either to clean them or give me more room but I just cannot remember all of the specifics, All I know I did not have to remove the fender nor take anything major apart. I think this picture might help as I believe this is the one end I bent down to get things out and then once back in, bent it flat again ?. I just cannot remember. live.staticflickr.com/8698/17189556245_4161052e07_b.jpg Also too, here is an album with the still shows which you can click on and enlarge better than the ones on the youtube video. www.flickr.com/photos/121766713@N04/albums/72157649646999993/with/17189556245/ Jim
@@StlNovas I'll check that out. Much appreciated!
Thanks for the dislike from Germany on 2018-8-26. Dislike to you too.