Lowrance HDS12 Gen 2 - Crazy Touch Screen Repair.. Actually Krazy! 😉
HTML-код
- Опубликовано: 5 фев 2025
- So wow... This was quite the repair. For the impatient, skip to about 4:30...
This came in as a water damaged HDS12. After drying the unit out and performing some motherboard repairs we found the touchscreen to be completely dead - not responsive. Tried calibration, checked board, cpu card, no luck. We disassembled the screen and found the cause - bad digitizer. The touch screen cable physically was off the glass, and the digitizer contacts destroyed. Well this one is a no fix... or is it??
We brought it back to life, wow, just astonishing. I think I will be smiling for days because of this repair.
For all electronic repairs go to:
www.rudolphrep...
That’s my unit. Lol. So happy. Thanks man.
You are very welcome!
I may have to send my used HDS Carbon 12 to these fellas, I unfortunately got the used unit off Ebay recently…out of the gate the thing started the freezing screen problems😫🤦🏾♂️…was this fix pricy or a good affordable price point to repair?
That was a tough one. Awesome job
It sure was, Thanks!
the master strikes again!
Haha Thanks!
I have a Gen2 7" with this exact screen touch problem. I'm going to try this..if it works, I'll let you know. Seems like it will.
I have two of these hds12's and both won't get passed the logo screen. I'd like to send to you. Great video
Hello, the glass is broken, can I replace it? Is it sold separately? Or is it a Touchscreen?
It is the actual digitizer (touch screen) unfortunately. I have done some transplants using off the shelf touch screens but it's quite a bit of work. Any questions just let me know. 👍
Genius! Nice one mate
I have a Gen 2 Touch 12 inch that won't go into calibration mode, how can I check if the problem is the touch digitizer or the controller?
Is it feasible to replace the touch with a universal 5-pin resistive using the original attachments?
Interesting usb injector I'm curious about the connections.
One thing I noticed after testing the repair is the touch screen was extremely accurate and sensitive compared to stock. It calibrated easily and worked better than stock- strange, but definitely an added bonus..
So when these touch screens go out do they not sell replacements? My gen 2 touch was working great I cleaned it off with glass cleaner now nothing on the touch screen works zero moisture on the inside just a dead touch screen. The ribbon contacts look clean
Hello ,pls is possible to connect total scan with the hds9 gen2 tutch?
Amazing job!!!
What is the cost of this work pls?
I have a humminbird solix 12 g2 that the touch screen only works sometimes most times it doesn't work and I just use the buttons any idea what it could be?
Hi James, we would need to tear it apart and troubleshoot the issue. Send it in and we would be happy to provide a free on bench estimate.
www.rudolphrepairs.com/mail-in-repairs
I have a hds carbon 12 with a busted screen can you replace the screen for me
Unfortunately we do not have any screens on stock for the carbon 12
Is the lowrance hdi 9 and the lowrance reveal 9 digitizer the same? They both have the same exact specs and resolution.
I need a screen for a lowrance reveal 9 TS
Would you have a power button ribbon for one of these mine looks burnt under the ribbon
We make them in house as needed, Lowrance doesn't sell parts unfortunately. Send over a free estimate request:
www.rudolphrepairs.com/free-estimate
How much to repair hds12 cracked screen
Damn I got a carbon 12 that the touch screen when out completely I might have to send it in.
That sucks, but we will be happy to fix it for you! Feel free to mail it in-
www.rudolphrepairs.com/mail-in-repairs
I wonder how reliable it will be in the longer term.
I believe it’s the same or very similar to the material the factory uses. When dried it did look the same (color) and had the same resistance. The cable which was glued down is also held in place by the front case rubber gasket. I believe it will be a good long term fix, but we do guarantee all repairs.
hi chad ,i have a hds9 gen 3 that flickered a few times then went dead and now wont turn on , any ideas please ? my power supply is fine as powers a hook 7 ground is fine battery is new ,12.7v -14.2v running ,cant go fishing without it =(
Hi, sounds almost like how backlights fail.. have your tried shining a flashlight and/or pressing some buttons to see if it is actually still powered on (and maybe backlight is dead)?
@@rudolphelectronicrepairllc8938 when i press the power on button all the soft touch buttons light up so theres power just nothing on the display .tried the flashlight trick and nothing just blankness lol also no beeps when i press on button
@@2534will we would be happy to get it on the bench-
www.rudolphrepairs.com/mail-in-repairs
@@rudolphelectronicrepairllc8938 id love to send it to you guys for repair but im across the pond unfortunately =( wish we had people as skilled as you here =(
@@2534will no problem, we do offer international repair if it makes financial sense to do so. We have had several from Australia, Japan, etc. no pressure though!
WOW !
so navico owns simrad, b&g, lowrance, but when I called simrad they said I could not buy any repair parts out of warranty , same with B&g, but someone told me you can still get out of warranty parts for lowrance? Would you know about his by any chance? I like the idea of repairing something rather then being told i have to buy a whole new unit..this new business model sucks like a vampire starving for blood!!