HOW TO DO AUTOMATIC DRIP IRRIGATION. Little water, due to gravity and low pressure!

MULTI-FILAMENT SYSTEM. I teach how to make a cheap irrigation system, with black hose, by drip, using material, with little pressure and with very little water, destined to the orchard. In short: Pull water from the cistern automatically (can be manual) by the tap timer and then store in water tanks. From the water tanks, do the irrigation by passing the black hose on all the fruit trees and placing the dripper. Use the timer for irrigation if you want to automate. If it is manual watering you do not need the timer. Place a direct 25mm pipe outlet for each orchard line, as the pressure is low. With this system you can water an orchard with more than 100 fruit trees, just calculate at least 10 liters
of water for each plant ... if you are going to water 50 plants and 10 liters for each, then 500 liters will be needed. So the water tank must be more than 1,000 liters or more, so that there is enough water and pressure.
################################################### #######
If you want to have a FOOD FOREST in your home or farm, access the link below to have the e-book teaching you step by step how to implement your organic food factory:
hotm.art/lngzMX
Watch the video and learn more:
HOW TO MAKE A FOOD FOREST
www.youtube.co...
################################################### ######
System: Drip.
Height of the water tank: 3m the smallest and 4m the largest.
Water tank: 03 of 250 liters and 01 of 10,000 liters (to be placed)
Cistern: 40 cm water depth during the dry season that supplies 600 liters per day.
Materials:
1/2 black hose-dripper-50mm weldable water pipe-25mm weldable water pipe-25mm registration-1/2-T hose registration for 25mm pipe-Timer Timer for outlet purchased on the internet for 40 , 00-Timer timer for irrigation purchased on the internet for 140.00.