I am not the biggest fan of dodge darts but I have to say, Your car has to be sexiest looking dart I've ever seen, You just put it together soo freaking nicely brother!
I have a lug conversion kit coming from modern performance so I can run black lugs on my car my cars in the shop as we speak getting light weight crank and water pump pulley installed and ordered different headlights too
thanks man I wish I still had the car and I don't have a link as I got these some time ago but if you just go to the ESR website they're under the rotary forged line up
Has that hood with the scoop dirty up your engine bay ? Does it get a lot of water if it's raining? Thinking bout picking it up. Love the wheels. Are they copper or bronze?
Why did you stretch the tires instead of getting wider tires? Was it an aesthetic thing or would wider tires rub with this wheel setup? Thank for your help! Sweet ride btw!
I didn’t have them a terribly long time cause I sold the car about 5k after installing the wheels but the few rain storms I had them in they were fine but the dart is not really a fast car so it wasn’t much for testing the limits of tires
What are the measurements for the esr wheels? I’m looking at a pair of esr cs8’s and the measurements are 18”x8.5 5x110 with 72 offset is that similar to what you have?
Hey, I was wondering what you did with the dodge lettering across the top back. Did you just debadge? It looked like the lettering would leave indents when I debadged mine, so I left it alone. Any tips?
Buy some Chemical Guys *Jet Seal* and it will help protect your carbon fiber from the sun. Companies who make CF parts usually put on the cheapest shittiest clearcoat.
Hope you reply. But i got the fiberglass Mpx GTS hood as well recently and accepeting it is aftermarket. How did you get it so perfectly lined up ? Mine is kind of lifted up more on the passenger side then the driver side. Other then that issue if i had more lowered it would fit perfectly.
It honestly just takes some messing with I kept slightly bending the hood hinges and adjusting the hood levels for look like an hour before I was happy
@@Wisco_Ram_Page okay so im not the only one having trouble. It does look good but knowing that the space is there and everyone asking why its like that can get very frustrating. Btw you should make a video on a little tutorial how you adjusted the hood. It can be very helpful for others ! 👌
Nice wheels man. Would you say that the spokes come out enough to clear some big brakes? I've been trying to research them to see if they fit my 2014 is350.
Car looks awesome. I'm looking into the BC's myself. How was the install ? I have a black rally and have just been starting to add the goodies to it :) those wheels look reeeeaally good, better than the mopar ones that are on the charger/challenger. And we both have the clear plastic blacked out on the taillights haha
I loved the BCs just wished the went lower in the rear the install isn't too bad just takes some patience and yeah I loved those wheels and I was the only one with them for awhile but the Mopar wheels are sweet also...sorry for the late reply didn't see it
How did you get them in the 5x110 pattern? I guess ESR doesn't make that lug pattern anymore because I looked and they don't custom make them either. Just got an email that they don't
NonStopPepper probably not but I can’t say for sure I still have some room between my tire and fender so you could a little bigger just wouldn’t go nuts
17 inch? Nice car but, the engines are a huge flaw I had to replace my entire engine at 69,,000 km Piston number 3 sized up. Not to mention the tranny issues aw well. Now 70,000 km and I'm getting a clunking noise in the steering.. Also unconnect won't connect with my phone. Lol isuess isuess isuess. Andless issues with the Aero!
The car _looks_ nice but it's a shame these cars came with shitty engines and transmissions. They look nice but they just aren't worth spending money on.
I was lucky in the fact in the 50k miles I put on mine I had no issues but I also did mess with the motor at all I just like driving around in it but I know people have had issues but typically they were trying to make it faster
@@Wisco_Ram_Page Driving a car like a granny doesn't really define how reliable it is. For example my 370z was modified and I smashed the rev limiter nearly every time I drove it and the engine never had issues and the transmission was perfectly fine. I know the Dart is a lower price car but Chrysler products focus more on mass production before quality.
NICE! Can't wait to get back and add more to my Dart. Solid whip my guy!
I am not the biggest fan of dodge darts but I have to say, Your car has to be sexiest looking dart I've ever seen, You just put it together soo freaking nicely brother!
Appreciate it man
awesome update man. thanks for posting. I"ll be doing my first stretched set up too, so I totally relate to this.
Its definitely a commitment to stretch you never realize how thing hit your wheels till they're unprotected haha
@@Wisco_Ram_Page i hear you. I am likely going to have to cut the fender liners a bit on my E46
Did you remove the top or bottom collar from the coil to get it lower?
Fire setup man definitely gonna do this to my Dart GT !
I have a lug conversion kit coming from modern performance so I can run black lugs on my car my cars in the shop as we speak getting light weight crank and water pump pulley installed and ordered different headlights too
Car looks great wheels look great. Subscribed now I'm a fellow dairyland dart guy myself
Totally stealing those wheels, gorgeous!
What is your tire size, wheel size and stretch?
I love your set up!
18x9+30 wheel 215/35 I believe on the tire
I will get the weells soon in hyper black😎
Love the look on them🤤
I thought about black to but I thought the bronze popped better on my color
Nice ride man where did you get your front lip and trunk spoiler
How much is your mopar front and rear body kit?
Neil Malenab I only bought the front lip for $100
Hey man, that's a mean dart! Could you drop a link to those wheels?
thanks man I wish I still had the car and I don't have a link as I got these some time ago but if you just go to the ESR website they're under the rotary forged line up
Can I just put 18’s with the 215/35’s or do they need to be offset
Man u did this car right looks clean as hell
Hey how did you get the ESR RF2 to fit? Isn’t the factory bolt pattern on the dart 5x110? The ESR RF2’s bold pattern are 5X114.3
Has that hood with the scoop dirty up your engine bay ? Does it get a lot of water if it's raining? Thinking bout picking it up. Love the wheels. Are they copper or bronze?
Where’s the ducktail from? Modern performance?
Spoiler king was the brand but it came from Amazon
Those wheels are super nice
Christian Portillo thanks man I appreciate that it took a while of shopping through wheels to find some I was happy with
Why did you stretch the tires instead of getting wider tires? Was it an aesthetic thing or would wider tires rub with this wheel setup? Thank for your help! Sweet ride btw!
Justin Pulvirenti it would definitely rub if had much wider of a tire but I do like the way it looks stretched
Do you run any spacers with it? And do you rub at all when hitting bumps? And do you think a 235/35/18 will be safe
rear spoiler ?
How the tires perform on dry and wet roads???
I didn’t have them a terribly long time cause I sold the car about 5k after installing the wheels but the few rain storms I had them in they were fine but the dart is not really a fast car so it wasn’t much for testing the limits of tires
Who installed the Coilovers on that Dart???
What are the measurements for the esr wheels? I’m looking at a pair of esr cs8’s and the measurements are 18”x8.5 5x110 with 72 offset is that similar to what you have?
I dont believe they make my exact size in this style wheel anymore but it was 18x9 +30 and it was 5x112 redrilled to 5x110
Yo, was that filmed in Huber Heights Ohio?
How’d you get your taillights to blink like that
Did you have any problem getting them to fit cause it says the Dodge Dart bolt pattern is 5x110 and these wheels went
ESR redrilled I believe 5x112 to my size
I just bought a 2015 dodge dart SXT what kind of front bumper do you have on that? And also how dark is your tint
Also how did you lower your vehicle what did you use? Thank you for the help
Hey, I was wondering what you did with the dodge lettering across the top back. Did you just debadge? It looked like the lettering would leave indents when I debadged mine, so I left it alone. Any tips?
My letters are still on just plasti dipped them
Cool, ty man.
Is that a stock tail light ?? Why is it blinking?
Yea theyre stock and it’s just how cameras pick up led lights
I have a laser blue 16’ looking for a stanced look on my dart. What set up do you have in your suspension, this is quite the striking pose.
They're BC coilovers dropped all the way down and I removed the perch and one of the collars (not recommended) I wanted to be as low as it can be
Have you noticed any sun damage to the clear coat of the CF hood?
I only had the dart for a few months after I bought the hood and it had some fading already but it didn't get worse in the short time I had it
Buy some Chemical Guys *Jet Seal* and it will help protect your carbon fiber from the sun. Companies who make CF parts usually put on the cheapest shittiest clearcoat.
Where did you get the wheels redrilled? Straight from esr or?
Esr did it for me at $25 a wheel
Such a beautiful car ready to start my build 🙏🏽darts are slept on here in jersey
Did you install camber plates ? I am looking into the same set up ( BC coils and esr's ) and was curious how it went.
Zschneider91 no I did not that’s how they sat naturally when lowered
Fuller’s Garage awesome, they look great. Thanks for the reply. Can't wait to get mine on now !
Where can I find those rims not much available for 5x110
How much inch drop?
I like your set up man.
sleek.
Hope you reply. But i got the fiberglass Mpx GTS hood as well recently and accepeting it is aftermarket. How did you get it so perfectly lined up ? Mine is kind of lifted up more on the passenger side then the driver side. Other then that issue if i had more lowered it would fit perfectly.
It honestly just takes some messing with I kept slightly bending the hood hinges and adjusting the hood levels for look like an hour before I was happy
@@Wisco_Ram_Page okay so im not the only one having trouble. It does look good but knowing that the space is there and everyone asking why its like that can get very frustrating. Btw you should make a video on a little tutorial how you adjusted the hood. It can be very helpful for others ! 👌
I dont have the dart anymore unfortunately so I can't make another video
@@Wisco_Ram_Page awe damn, you should have given me your headlights atleast lol well it was nice. Good day !
Nice wheels man. Would you say that the spokes come out enough to clear some big brakes? I've been trying to research them to see if they fit my 2014 is350.
Andrew Trieu yeah for sure there is a lot of room in there
I just ordered some RF2’s for my dart and I see that those are not the oem lug bolts, did you just replace yours or something?
DJ yes I did replace them, but it was awhile ago so I’m not sure in where I got them though
What type of rear spoiler is that?
Car looks awesome. I'm looking into the BC's myself. How was the install ? I have a black rally and have just been starting to add the goodies to it :) those wheels look reeeeaally good, better than the mopar ones that are on the charger/challenger. And we both have the clear plastic blacked out on the taillights haha
I loved the BCs just wished the went lower in the rear the install isn't too bad just takes some patience and yeah I loved those wheels and I was the only one with them for awhile but the Mopar wheels are sweet also...sorry for the late reply didn't see it
How did you get them in the 5x110 pattern? I guess ESR doesn't make that lug pattern anymore because I looked and they don't custom make them either. Just got an email that they don't
Yeah ESR redrilled them for me to my size I would be surprised to here they stopped that but I haven't checked in awhile
@@Wisco_Ram_Page yeah they just got back with me. I had 18x8.5 not 18x9. But they did custom drill them to the 5x110?
They only make 18x9.5 no more 18x9. Think that'll fit?
Where do I find that lip kit
Base car.? Why no dual. Would look so much better
What springs did you use and are those 18s?
bc coilovers and yes they're 18s
Where did you get that spoiler? I dig the overall setup man!
Esteban Vega off of Amazon I think spoiler king made it but just type in Dodge Dart duckbill and it should pop up
How low did you go with your springs or coils
Bc coilovers fronts were maxed rear were maxes plus I took one of the gold collars off to get a little lower
You still have your car?
🔥🔥🔥
Would you have to roll your fenders if you go 225s?
NonStopPepper probably not but I can’t say for sure I still have some room between my tire and fender so you could a little bigger just wouldn’t go nuts
Fuller’s Garage yeah I’m looking to do a similar setup just with less stretch
Nice! What color is your car? Kinda hard to tell...
Granite crystal metallic
How you do them back light like that
Damn she sits nice 👍🏽
Hey bro your car is on the fitment industry website
Clean set up man❗️I just got a set of RF1’s
Where did you order the rims
Did you need adapters to run those wheels? Was thinking about some enkei m52’s but you might have just changed my mind
Gucci Flip Flops no I did not
I like the Enkei as well
1 more question. Did you need to add camber in the back to make them fit or is that just for appearance?
Where did you get front body kit?
I just have the mopar front lip that's all
where did you get rf2 in 5x110? they dont carry that pattern on their website
nevermind i figured it out lol
K's Garage ESR redrilled them for me
Yeah thats what i did. Put in a quote request
K's Garage yeah it was like 25 a wheel
Fuller’s Garage did you use affirm or just pay them off?
What brand fog light did you say?
denverdevilboi they’re 60watt Xk glow
Can you use the Mopar Ram air with that hood?
The PlastiDipper no unfortunately
I think I would’ve went with the 245/40R18 nittos
What size ur rims?
18x9
what size tires are you running?
215/35 18
Who did you order the wheels from
Mmb0927 I bought them directly from ESR wheels
That’s a SEXY DART!!
Where did you find your wheels?
Morgan Snively ESR wheels website
They have 5x110?
Or did you use adapters?
They redrilled them for me to my bolt pattern
@@Wisco_Ram_Page ×
what rear lip is that?
Ordered off Amazon but I thinks its from spoiler king duck bill
Looking at these in 19s. Are they heavy?
Yeah they have some good weight to them but right around the stock 18s...sorry for the late reply
Wats the Size of the rims?
uzoigwe obi 18x9
17 inch?
Nice car but, the engines are a huge flaw I had to replace my entire engine at 69,,000 km
Piston number 3 sized up.
Not to mention the tranny issues aw well.
Now 70,000 km and I'm getting a clunking noise in the steering..
Also unconnect won't connect with my phone.
Lol isuess isuess isuess.
Andless issues with the Aero!
Hydra Inarms yeah I was lucky enough in 40k no issues but that’s kinda how these cars went either crazy issues or no issues
You sold this?
Yes I did
Wisco_Ram_Page damn
Wheels name.
ESR RF2
you can go a little lower in the back, get the rear fitment flushed
ShuVvz I did that last week and on certain driveways my inner fender scratched the face of my wheel so I put it back
Lowering the Dart is a crime.
All that for a base model...no way
The car _looks_ nice but it's a shame these cars came with shitty engines and transmissions. They look nice but they just aren't worth spending money on.
I was lucky in the fact in the 50k miles I put on mine I had no issues but I also did mess with the motor at all I just like driving around in it but I know people have had issues but typically they were trying to make it faster
@@Wisco_Ram_Page Driving a car like a granny doesn't really define how reliable it is. For example my 370z was modified and I smashed the rev limiter nearly every time I drove it and the engine never had issues and the transmission was perfectly fine. I know the Dart is a lower price car but Chrysler products focus more on mass production before quality.