Another great video! For a ratcheting t-handle, try the Wera. Got one recently and it works great. That craftsman with the Phillips and flat blade you showed...I'm 57, my dad still has a couple of them in perfect shape. Handy little units for tight places. He worked in auto body repair as a profession. Still has his gray and red craftsman box that is probably older than me and still in great shape. He took great care of his tools and passed that attitude on to my brother and me. Doesn't have to be the most expensive tool, just a good quality one that gets the job done.
Ill have to try the wera,i heard lots of folks like it!!! old crattsman tools,oh my god,i can go on and on how much i love them,i own hundreds of old craftsman tools!! your father taught you and your brother well! stay tuned!!
i have these sets with bits that look like the sears one. but you can flip bit in either side to get forward or reverse comes in a yellow plastic pouch with an assortment of bits good for really tight spots
Your top 4 or 5 would be my top half dozen as well. I need to say if I don't stop buying I will need a bigger box. The swivel head are really nice and the color is super.
Hi Jeff - I only just found this older video of yours. If you want to expand your collection, I can recommend bit drivers by Facom (that one was copied for the very popular Icon set), Wera (really tiny and one of my favourites), Bosch and Bahco. Lang are still making bit ratchets in the USA, and they are also available rebranded by Blue Point. The SabreCut stainless steel one you have is available in the UK rebranded as Sealey Premier.
I got the Gearwrench (#81032) locking flexhead kit at my Home Depot for $70. One of my most used tools, and I've saved my boss on a couple of cars with these ratchets. It comes with 2 ratchets 72 tooth, one 12 inches and one about 6 inches. Better yet, you can replace the internals if you break them.
I carry HBR5 with 4 old Oxwall sockets. The Oxwall were a cheaper brand but they’re shorter than most sockets and don’t take up as much space in my pocket. The HBR5 has a 1/4 and 5/16 ratchet plus 1/4 drive adapter
I have one of those thin silver Craftsman's. Mine is standard on one side, phillips on the other and it's saved me a few times. It's never been a joy to use, but it can get into tight spaces
I don't know where you were told the double side L handle one is a ratchet or charge $8. I bought 6 of them for about $1.50 each on AliExpress and left them in various areas to use in a pinch. My car, wifes car, kitchen, and office.
Harbor freight makes a cheap ($3) copy of your old craftsman with the knob. 92630 Also Ares now has their take on the roto head like Titan. 42111 for the red
Hey Jeff, if you or anyone wants to know the quality of Stainless Steel, put a magnet to it? If the magnet sticks a little, it's medium grade, if it doesn't at all, it's top grade?
Hi dave you are spot on, i had a stainless steel plate in my arm, a magnet does not stick to it!! the sabrecut ratchet is stainless and the magnet doesnt stick to it !!
I have a Craftsman tool like the L-shaped black one you have? It's like an extension with a 90 degree bend? It has a magnet in the end for bits, but no ratcheting mechanism? It's for close access work? I'd recommend? I own another Craftsman, with a ratcheting head and a rubber grip over the steel handle, it's pretty good for tight spot work? Have a bunch of open ended ratcheting wrenches by Proto, Craftsman and Yellow Jacket? The YJ one's are square drive's for gas bottle valves on welding tanks? The Proto's are just awesome quality? One has an off -set of 30 degrees on both ends? Love my USA tools?
I owned the l shaped craftsman one your talking about, got lost in the shuffle from moving from one shop to another!! i love proto tools dave, i can tell you that!! dont know about yellow jacket, never had any in my hand!! thanks dave !
Hi lieser thanks for the well whishes on my back, im taking it slow still, wanna finish the chevelle, but im nervous about agravating my back!! thanks a ton, for supporting my tiny channel!!
That second to last one on the bottom, looks like the Chapman? Their top quality USA tools, but the little ratchet, that comes with the bits, is not that impressive? They sell a palm ratchet, that I would recommend?
“Why did I buy this?” the story of my life!😂
Hi nick, aint that the truth!! hope i entertain you guys,as well as giving good information!! thanks nick!!
@@jefftovani5535 yeah man you’re a trip. You’ve Got me saying TAKE A GANDER!!!
Dude, you just showed the only car that I would want to drive, I love the ss. Love your videos
Hi rob,thank you!! that chevelle got a zz502 big block!! stay tuned for more goodies, thanks for watching!
Another great video! For a ratcheting t-handle, try the Wera. Got one recently and it works great. That craftsman with the Phillips and flat blade you showed...I'm 57, my dad still has a couple of them in perfect shape. Handy little units for tight places. He worked in auto body repair as a profession. Still has his gray and red craftsman box that is probably older than me and still in great shape. He took great care of his tools and passed that attitude on to my brother and me. Doesn't have to be the most expensive tool, just a good quality one that gets the job done.
Ill have to try the wera,i heard lots of folks like it!!! old crattsman tools,oh my god,i can go on and on how much i love them,i own hundreds of old craftsman tools!! your father taught you and your brother well! stay tuned!!
i have these sets with bits that look like the sears one. but you can flip bit in either side to get forward or reverse comes in a yellow plastic pouch with an assortment of bits good for really tight spots
High ranger thanks for joining in and sharing that with the channel!!!!
Your top 4 or 5 would be my top half dozen as well. I need to say if I don't stop buying I will need a bigger box. The swivel head are really nice and the color is super.
Hi scott, yea the top 5 are sweet, those roto head ratchets are damn sweet!! stay tuned my friend!!
Hi Jeff - I only just found this older video of yours. If you want to expand your collection, I can recommend bit drivers by Facom (that one was copied for the very popular Icon set), Wera (really tiny and one of my favourites), Bosch and Bahco. Lang are still making bit ratchets in the USA, and they are also available rebranded by Blue Point. The SabreCut stainless steel one you have is available in the UK rebranded as Sealey Premier.
Thank you my friend,im always looking for new tools for content and to add to my collection!!!
@@jefftovani5535 If you need any part numbers, just ask.
“I’ve got more teeth than that”. Oh man Jeff, you crack me up!
Hi brown i try to be entertaining!! Glad you liked!!
Thanks, Jeff! Nice comparisons here. Some good, some, not so much.
Thanks tom for watching,thats a older video,but interesting!!!
I got the Gearwrench (#81032) locking flexhead kit at my Home Depot for $70. One of my most used tools, and I've saved my boss on a couple of cars with these ratchets. It comes with 2 ratchets 72 tooth, one 12 inches and one about 6 inches. Better yet, you can replace the internals if you break them.
Hi rob, ill have to check it out,thanks for the info!! stay tuned!!
I might be a little late to the party but I enjoyed this video from beginning to end!!!
Better late then never!!! thank you barry!!!
I had a craftsman offset ratchet. Cool for the time.
Hi aubrey i think i had that one!!! thanks for joining in!!!
I carry HBR5 with 4 old Oxwall sockets. The Oxwall were a cheaper brand but they’re shorter than most sockets and don’t take up as much space in my pocket. The HBR5 has a 1/4 and 5/16 ratchet plus 1/4 drive adapter
Hi dave thats great info to pass along, ill be looking them up!! thanks dave!
Thanks for the information keep em coming that icon set is great
Hi mike i will,yes the. Icon set is the real deal!!! Thanks mike!!
I have one of those thin silver Craftsman's. Mine is standard on one side, phillips on the other and it's saved me a few times. It's never been a joy to use, but it can get into tight spaces
Thanks justin for joining in and sharing that!!!
I don't know where you were told the double side L handle one is a ratchet or charge $8. I bought 6 of them for about $1.50 each on AliExpress and left them in various areas to use in a pinch. My car, wifes car, kitchen, and office.
Thanks!!
Thanks for the look, great selection you have. How about some ratcheting screwdrivers?
Hi 91z50, ill do one very soon, i get lots of request, so hang on, i will get to them!! thanks for watching my friend!!
Pretty large collection of bit ratchets. I have a few but nowhere near that much.
Thanks,Jethro, you got some nice ones, blue point and sunex,icon!! Your good, thanks for watching!
"Take a gander !"
👍👍👍
Thanks my friend for watching!!
Harbor freight makes a cheap ($3) copy of your old craftsman with the knob. 92630
Also Ares now has their take on the roto head like Titan. 42111 for the red
Thanks for the info my friend,stay tuned my friend for more good things!!
Hey Jeff, if you or anyone wants to know the quality of Stainless Steel, put a magnet to it? If the magnet sticks a little, it's medium grade, if it doesn't at all, it's top grade?
Hi dave you are spot on, i had a stainless steel plate in my arm, a magnet does not stick to it!! the sabrecut ratchet is stainless and the magnet doesnt stick to it !!
Got a Quinn one with a kit
Nice,thanks for sharing with us!! stay tuned my friend!!!
I like the reviews. Can you put the Amazon links in the video description?
im having problems with direct links,please bare with me,im working on it!!
I have a Craftsman tool like the L-shaped black one you have? It's like an extension with a 90 degree bend? It has a magnet in the end for bits, but no ratcheting mechanism? It's for close access work? I'd recommend? I own another Craftsman, with a ratcheting head and a rubber grip over the steel handle, it's pretty good for tight spot work? Have a bunch of open ended ratcheting wrenches by Proto, Craftsman and Yellow Jacket? The YJ one's are square drive's for gas bottle valves on welding tanks? The Proto's are just awesome quality? One has an off -set of 30 degrees on both ends? Love my USA tools?
I owned the l shaped craftsman one your talking about, got lost in the shuffle from moving from one shop to another!! i love proto tools dave, i can tell you that!! dont know about yellow jacket, never had any in my hand!! thanks dave !
I never seen a Craftsman ratchet like that.
Hi pete i have a few,lol!! i know you have a bunch of craftsman tools!! thanks pete!!
You can't link them?
It would be helpful
Did you buy these separately? Or did they come in a set?
ill have to go back and look,wich ones are you interested in?
All of them. You should create Amazon affiliate links and put them at the top of your post on the description section
Why ask why!!!
its like a women that has 35 pairs of shoes, why ask why!!! lol!!!
@@jefftovani5535 haha!!!!! Perfect!!!
Nice collection of bit ratchets. The second row of ratchets look to be really useful. Glad to hear that your back is feeling better!
Hi lieser thanks for the well whishes on my back, im taking it slow still, wanna finish the chevelle, but im nervous about agravating my back!! thanks a ton, for supporting my tiny channel!!
That second to last one on the bottom, looks like the Chapman? Their top quality USA tools, but the little ratchet, that comes with the bits, is not that impressive? They sell a palm ratchet, that I would recommend?
The second to last one is old craftsman,old stock!! i heard of chapman tools, some are.on amazon!! thanks dave for your wisdom!!
Grab the Klien with the loop handle. Its a game changer.
Hi ron,klien makes great stuff. i will check them out, thank you!!
Love that Titan with the swivel head. Haven't tried the icon yet, but it sure seems to be getting all the positive press
Hi nathan the titan with the swivel head is beauty!! the icon with the locking head is my favorite!! thanks nathan!!
5:17 5:17 😂⁴⁴4 5:49 5:49 5:49 5:49 5:49 5:50 5:50 ❤4 5:50 ❤❤❤😅