I take the LPR out at 4:50 into the video just by pulling the black tab down out from where the regulator goes. Not sure if that is what you are talking about or not.
have you had any problems using that much oil on your bolt? I've always heard to clean the bolt with oil but wipe off virtually all of it. mainly because excess oil attracts dirt and you scuff your breach.
After 55k shots on mine, i still haven't cleaned anything besides the hammer & nail, it's been over two years now too, did i cause permanent damage to my lv1 for not taking care of it?
You shouldn't have. You would probably be losing some performance at this point. Your reg might be at a higher pressure than what it would be if it was freshly cleaned and greased.
I use Planet Eclipse Grease tricityextreme.com/shop/planet-eclipse-marker-grease-20ml/ Planet Eclipse Oil tricityextreme.com/shop/planet-eclipse-paintball-marker-oil-10cc/
+Edwin Ordonez I used to do mine once a month. It comes down to how much you play. Do not use grease on the ram and bolt, you will have a significant decrease in performance.
you shouldnt need a hex key to remove the rammer cap imo. And also imo thats an insane amount of oil on the bolt.
The lpr cap, does the black rod that is attached to it come off? I’m sending mine in for ano and can’t seem to get it off
I take the LPR out at 4:50 into the video just by pulling the black tab down out from where the regulator goes. Not sure if that is what you are talking about or not.
Thank you
I want to know how you set your lv1 up to shoot, what adjustments you do?
I will do a video of all that!
Ok.. I'll be waiting
Should be done tomorrow!
Nice.. thank you bro..
Jose Aguilar ruclips.net/video/pDK7Qw7PGIQ/видео.html
have you had any problems using that much oil on your bolt? I've always heard to clean the bolt with oil but wipe off virtually all of it. mainly because excess oil attracts dirt and you scuff your breach.
+Thomas Tipton Nope never had an issue, I also cleaned it after just about every use.
After 55k shots on mine, i still haven't cleaned anything besides the hammer & nail, it's been over two years now too, did i cause permanent damage to my lv1 for not taking care of it?
You shouldn't have. You would probably be losing some performance at this point. Your reg might be at a higher pressure than what it would be if it was freshly cleaned and greased.
Shouldn't need pliers to remove the tuning fork. If you push on the LPR assembly and cap the tuning fork comes out easily
What grease are you using?
I use
Planet Eclipse Grease
tricityextreme.com/shop/planet-eclipse-marker-grease-20ml/
Planet Eclipse Oil
tricityextreme.com/shop/planet-eclipse-paintball-marker-oil-10cc/
every how long do I need to lube my gun and what if I don't have oil can i use grease and what if I only lube my ram and bolt?
+Edwin Ordonez I used to do mine once a month. It comes down to how much you play. Do not use grease on the ram and bolt, you will have a significant decrease in performance.
You didn’t grease the piston stem
Good video but the lighting is horrible