@@electron1012 I thought that too... Especially when the air-compressor came on while they were putting the first one on, with the speed increase on the video I thought they were doing the Big-Rig horn on purpose... Then I realized, Air tools, so ... Air compressor LOL!
Freaking bad A$$. Beautiful look. I need to build one now. I'm currently building my 6year old an old 70s go kart restoration. I think one of these is next. Good work man.
Witam i pozdrawiam!!Super motocykl trojkolowy zbudowaany wlasnymi rekami,duza wiedza z tej dziedziny,frajda z jego zbudowania i zlozenia,prawdziwy majstersztyk,swietny material filmowy ,tak trzymac!!
I am only watching this because I watched colinfurze built one than I wanted to build one and the engine in this is the one that I am using. (I wanted to know how strong it was)
I really want to build something like this but don't have something to cut the metal or to weld. What cutter did you use? I can buy the cutter and have my cousin who is a welder do the welding for me
Where do you find the square framing metal like that? I'm building my own setup and have been using scrap pieces from other junked gokarts. It'd be nice to have a fresh start rather all used pieces that I sand blast. Takes forever.
Would you be inclined to make a video about what makes a good drift trike like tire width or axle length and specifically front tire size and width and what difference they make thanks for your time
That was friggin sweet. Thanks for the build vid.
That is so danm bad ass!! Great job man!! I want one now lol lot better then my Dukes of Hazzard big wheel i had as a kid haha
Looks great . Love the fact you made mud guards for the tires but never bothered with a chain guard lol
The mud guards really stood out. Like a rig
@@electron1012 I thought that too... Especially when the air-compressor came on while they were putting the first one on, with the speed increase on the video I thought they were doing the Big-Rig horn on purpose... Then I realized, Air tools, so ... Air compressor LOL!
thatsxbecause mud gets in your eyes but chains rarely do.
Blue on blue racing make your own and put a chain gaurd on it
low probability of chopping your fingers off is far less concerning than very high probability of getting mud in your hair
I felt like I was building with you. Really well shot and edited.
That's a whole world of fun. Thanks for sharing.
Really cool build!!!!👍
That thing is pretty sick👍
Freaking bad A$$. Beautiful look. I need to build one now. I'm currently building my 6year old an old 70s go kart restoration. I think one of these is next. Good work man.
killer build !! looks fun as hell.
Nice build. Zero BS. Thats what I like.
Looks fun as sh*t, feel like building sumpin similar...definitely wouldn't be as good as this tho!! Good job bro!
nice it slides like a beast
Bro is insane I like it
AWESOME BUILD. Duuuude
How did you not have more views and subs you throw out cool custom stuff!
That is one of the coolest little machines I have ever seen.
Thank you!
can i get the measurements for everything please.
I've gotta do a school project in metal and this is really cool.
Witam i pozdrawiam!!Super motocykl trojkolowy zbudowaany wlasnymi rekami,duza wiedza z tej dziedziny,frajda z jego zbudowania i zlozenia,prawdziwy majstersztyk,swietny material filmowy ,tak trzymac!!
melhor de todos!!
I liked it, very practical and useful.
Out of all the mig welders I've seen has the right technique
Like my daddy always said "measure once weld once" 😂
Measure twice cut once
anief riley like I always say guess the Kuwaiti weld her to fit
@@crazywormy5869 for real
we must of had different fathers
my grandfather, in Russia, always said "measure seven times, cut once", but I did not listen to him :(
Bravo champion rien a dire un vrai
I enjoyed watch these guys build things from scratch.
Man these Chipmunks got some skills man!
Awesome project!!!!. Next one do a shop compressor silencer cabinet!.... subscribed!!!!
Lol
Wtf even is that
Cara que projeto irado ficou muito bom fantástico
1:21 Sounds like the furnace in old school runescape haha
BAD ASS MAN!!! Love your builds keep it up!
Honestly that looks like so much fun I'm going to get out the everlast welder and start making one for myself.
Awesome what everlast do you have?
Now that looks like Soo much fun I would spent all my time drifting around!!!!phucken awesome build nice job keep drifting bro!!
thank you
Great welding skill!
Definitely a build Colin Furze would be proud of, Hope you're wearing you safety tie!
I am only watching this because I watched colinfurze built one than I wanted to build one and the engine in this is the one that I am using. (I wanted to know how strong it was)
Everyone needs one of these lol
excelente muy bueno felicitaciones
The octagon pieces are 22.5? But what's the length on the lower frame and neck risers
Awesome as good job 👍
Would really like to know the measurements of each cut
Excelent work great job
good job!
Вообще дрифт трайк для асфальта! По грунтовке впервые вижу! Наезднику респект там от тряски зубы повылетать могут!
That's exactly what I was thinking!
Лесно се преобръща на асфалт.
This frame can handle a BoostedBusa engine ... Overkill ... Good job
That woudl be awesome
Badass!
MUITO BOMMMMM CARA
PARABÉNS
That music though 💪
I really want to build something like this but don't have something to cut the metal or to weld. What cutter did you use? I can buy the cutter and have my cousin who is a welder do the welding for me
where do you get those bearings at i can only find cheap pillow blocks
Bien hecho 👌👌
Nice mig welds!
Прикольная тачка 😀👍👍👍
What size rectangular tubing did you use including thickness. It's a nice design and I like how you fabricated you fender flares as well nice touch.
Looks like 1" x 2"
Awesome!
Ficou show
Do you have problems with this 1 inch headset? I have an old BMX with 1 inch headset and don't know if it will hold up
sick!
Parabéns, show de projeto.
Great build ! can you put a list of the parts need it to build it thanks bro
That looks heavy af
Sweet ride Looks like a lot of fun. Put a chain guard on it tho 😬it would hurt like an S.O.B if that chain ever brakes
Kreatif tenan Kowe bro...
Cool music! 🤟
Simplesmente criativo e gosto de pilotar.
i subbed awesome work hope u make more vids
thank you
Perfect subed
that was scary @ 10:39 wow.. nice control buddy... and just tighten that fuel tank up a bit, was shaking crazy on rough terrain...
Top das galáxias
That is the coolest
Cool!!!
👍topppp!!
Hola..te quedo re lindo
Ficou bonito
Yes you can buy these and the V2 720cc on Amazon if interested.
I wonder how da lil kidd felt when they came outside to find half there bike missing lol 😆 lol
Está interesante hacer uno 😁
This is super COOL...😎
Thank you
Amil Hasan I agree
Where do you find the square framing metal like that? I'm building my own setup and have been using scrap pieces from other junked gokarts. It'd be nice to have a fresh start rather all used pieces that I sand blast. Takes forever.
Metal supply
like the idea that your have with the drift trike
No entiendo ni jota de lo que dicen en los comentarios jajaja pero esta muy bueno el triciclo
The drift of the spine
Good job
thanks
I'd like to see this build with the stingray chopper handles
You shit men fuck ahh ohh fuck
Well young man your a extremely good metal building man
thank you!
I’d love to ride all the vehicles u make
That looks way too fun...
you are the best
Круто 😎
That’s not an easy frame to weld, very impressive. Also the suicide shift is classic, best I’ve seen on RUclips
That's not a suicide shifter, that's the brake.
rplladnar ok
Amazing
Would you be inclined to make a video about what makes a good drift trike like tire width or axle length and specifically front tire size and width and what difference they make thanks for your time
De show 👍
How did he connect the throttle to the carb
Can we see some videos on your dodge Cummins
🙃🙋🏼♀️👍
very cool
good morning, i would like to know the measurements, i loved the project!
buenos días, me gustaría saber las medidas, ¡me encantó el proyecto!
What the metal instrumental with the killer leads?
Всё ничего, но жосткий он писец какой, о.. Ко всё потом болеть будет.
What motor did you put in that thing?
i like it and is realy cool to have
Is that 2"x3" 11ga tube?or 1x2