How to Fix and Repair Circular Saw

In today's video #selambensultanoglu we have covered the topic of circular saw failure detection and repair of the failure, I hope you will like it.
What is Circular Saw?
The machines that allow you to do the work easily by attaching circular cutters with an electric motor connection used in the cutting of plastic, metal and wooden materials are called circular saws. Depending on the quality of the material to be cut, the machine to be used and the cutting disc to be mounted on the machine differ. You should choose the cutting discs according to the size and material you will cut. The disc is rotated at high speed and a certain pressure is applied and cutting is done. The material to be cut with straight cuts is cut into pieces. Engine power also varies depending on the type and size of the material cut. They are the most used machines for a fast and smooth cutting.
What are the areas where circular saw can be used?
Carpenters
Blacksmiths
Plastic joinery
Cold smiths
Parkeck on
We believe that the branches that use circular saws are not limited to these. We offer the ones that come to mind.
What are the circular saw specifications?
Shaft; These are the apparatus made of steel materials used for fixing the cutting disc to the machine. It enables the shaft cutting disc or saw to move in the axis of rotation depending on the motor to rotate in the same axis.
Circular saws with table
Table; It is an additional apparatus fixed horizontally to the body. It is a metal reception workbench designed to allow the cutting disc to enter. The cut size is fixed with the channels on the table and fast cutting can be made for the same dimensions. A miter guard is mounted on it and adjustments are made. There is also a clamp for fixing. In general, this table is designed for straight cutting in older models, while new models include models designed for angle cuts.
Saw; It is an additional element that will be fixed with a shaft and cut. There are saws that can be used in diameters between 80 and 600 mm. There are brands and sizes produced in different sizes for each circular saw. Sizes should not be used except for the saw sizes that can be used in every machine.
Engine; It is an electrical device that provides rotational movement inside the body. It releases power and rotates the saw for cutting.
How to use a circular saw, what should be considered during and before use?
Circular saws are dangerous machines in the category of cutting machines in terms of use. For this reason, we will present the matter to you in items.
If you are not familiar with its use, you should seek support from a specialist.
You should definitely read the instructions for use.
Make the installation information step by step by using the installation kit included in the box. Improper assembly will create a hazard.
Make sure that the saw is fixed before cutting.
When saw changes, be sure to disconnect the circular saw electrical connection. If the saw you are using is old, its gears must be checked. If not, a new one should be installed.
Occupational safety equipment must be used to prevent accidents that may occur during cutting and to reduce the risk of death.
After performing security and control operations, the angle is adjusted for angle cutting, and for straight cutting, dimension settings are made on the table for angle cutting. Circular saw is operated and cutting is done.
If the material to be cut is a heavy material, the table is fixed and the weight of the material is held by the miter with the help of two people and its cutting is provided.
Cutting should not be done unless it reaches the speed required for cutting.
Material is applied with saw blade and cutting is done. There should not be too much pressure or sudden pressure. If the cut material is metal, excessive pressure should not be applied. Saw teeth may be damaged, overheating may occur.
After cutting, the circular saw is closed with the close button. When closing, never intervene until saw blade stop.
After the work is completed, the machine should be free from burrs and dirt that have formed. It should be cleaned and kept in a safe place.
People who do not know how to use should not be allowed to use.
TWITTER: / mustafa1asln1
FACEBOOK: / mustafa1asln1
INSTAGRAM: / mustafa1asln1
BLOGGER: www.mustafaasl...

[@eminyalcn3931]

Her konuda bilgilisiniz maşallah emeğinize sağlık 😊

[@osmangursoy6846]

Abi allah razı olsun sizlerden çok faydalandım rica etsem matkap ve hilti içinde vidyo cekermisiniz

[@MustafaAslan1]

izlediğiniz için teşekkür ederim,abone değilseniz abone olup ikaz çanını açarak yeni yükleyeceğimiz konuları ilk siz öğrenin, siz seyredin.

[@ademhavva4547]

Bizimkinde sizin sayenizde çalıştı

[@ozgurruhhh2678]

Emeğinize sağlık 👏

[@MustafaAslan1]

lütfen kanalınıza abone olup,yorum yazıp,beğeni atınız.İzlediğiniz için teşekkür ederim.

[@sultanoglu]

harikasın reis!

[@aliaslan465]

teşekkürler

[@MustafaAslan1]

seyrettiğiniz için teşekkür ederim,abone değilseniz lütfen abone olunuz

[@orhanutak]

Usta Bosch daire desterem var çalışıyor ama kesimde zorlanıyor durma seviyesine geliyor neden olabilir

[@MustafaAslan1]

kompresör veya piston arızası olabilir. incelemeden doğru cevap zor.

[@vatanm8648]

Selamun aleyküm abicim videonuzu yeni izledim ellerinize sağlık çalışmalarınız çok titiz beğendim sizden bir ricam olacak benim einheit marka sunta kesme makinem var bıçağını değiştiremiyorum vidalarını açamadım bu konuda bana yardımcı olabilirmisiniz şimdiden kolay gelsin teşekkür ederim selam ve saygılar

[@MustafaAslan1]

daha ziyade bilgi lazım.

[@cumaliozdemir6730]

Ustam sunta kesiciyi ters yöne çalıştırma imkanı varmı genelde alttan yukarı çalışıyor oda gözümüze geliyor yazarsanız memnun oluruz selamlar

[@MustafaAslan1]

koruyucu üst kapağı yok mu? o kapak çıkan talaşı arkaya vermek için var

[@birgencbircocuk943]

👍👍

[@MustafaAslan1]

izlediğiniz için teşekkür ederim.kanalımıza abone değilseniz abone olup uyarı zilini açarak herkesten önce yayınlanan videoları ilk izleyen siz olun.

[@bekiralamese3435]

Abi aynı sorun benim makinada da var tetiğe basınca duman çıkıyor

[@MustafaAslan1]

motorda bir sorun başlangıcı olabilir, bir ustaya göster

[@bekiralamese3435]

@@MustafaAslan1 sargısı sağlam abi arada calışıyor kömürlerinden kaynaklı olabilir mi

[@MustafaAslan1]

@@bekiralamese3435 duman çıkması umumiyetle motor kaynaklıdır.

[@woddywho9128]

Abi kolay gelsin bende daire testere var ama bıçağı ters dönüyor neden

[@MustafaAslan1]

1.erkek fişteki kaploların yerlerini değiştir,rotater olan aletlerde böyle olabiliyor.
2.testereyi ters çevir tak

[@salihekinci746]

Ustam palet kesıyodum bı koku ates cıktı makına calısmıyor nedendır

[@MustafaAslan1]

kesim esnasında motor çalişırken testereyi kesdiğin malzeme içinde sıkıştırdın mı

[@salihekinci746]

@@MustafaAslan1 evet usta

[@servetoral6261]

@@salihekinci746 aynısı az önce. Başıma geldi naptınız acaba

[@salihekinci746]

@@servetoral6261 abı bobınler yanmıs 150 tl yapdırdım bobınajcıya

[@servetoral6261]

@@salihekinci746 ne zaman yaptırdın