This is the only AT-TE moc that gets the orientation of the footpads correct. They form an X shape rather than the + shape that all the lego sets have used I mentioned/demonstrated it on my AT-TE mods video, and I was partially inspired by this MOC :)
0:49 Hi, I noticed the rear leg dangling but the front ones stay in place. Then at 18:30 I noticed the rear leg staying place. Did you find a fix you can share? All 4 of my legs free float and don’t stay in place 😔 PS - I love your videos, thank you 🙏🏼. I’m going to start the Bousker dropship this month
Hey! You just kind of manipulate the legs until they are the correct position. On mine I find the "knee" joint is just a little stiffer and so I have to physically angle it to the position I want it in.
Because of you review I've decided to build this model too but change a few minor things. I've currently got 56% of the parts list (currently listed on rebrickable) found within my own collection @@brickcats You mention all the pieces that were able to get into differen colours then listed on the page itself. I would've been helpfull if you could've placed these specific part numbers in your description or as a comment and pinned it on this video. I understand for now its too much of a hastle but maybe for future video's like these it could be a very nice addition 😄
@brickcats 5:30 of your video adds a little bit where you don’t see the middle section flex but I think thats untrue if you watch the frames 35:20-35:22 you can see the middle portion of the at-te flexing in “STAR WARS THE CLONE WARS” animated movie from 2008
Also you can see the mid section moving while it walks up the cliffside and the at-te that peels off the cliff as it explodes at 35:43 has it’s midsection clearly flex after it falls
Amazing! I just wish there was a better way to get parts than to buy from online stores or bricklink. So hard. Would be INSANE if somebody made a website where you could buy the parts/set to mocs.
Such sites do exist but you’re usually looking at a 60-70% markup in the best case scenario to cover the labor it takes to do the sorting. It also usually takes longer to arrive because most of these businesses don’t keep sets ready to ship out on the shelf.
Great review as usual! You ever heard of the moc builder Rebel Builder? You should check out some of his TIE's, they're some of the best I've seen for a much cheaper price than Brickvault!
Are the 4 light bluish gray "Cylinder 4 x 4 x 1 2/3 with Axle Holes" visible in the finished model? asking because they're a pain in the ass to get in that colour
This piece seems to be an addition to the model in between the original build and the Brick Vault build. That said, I don’t see it in the photos and the part does come in the older light gray which is a safe pick if it does end up being visible. I only have the original instruction set that doesn’t contain this piece, you could also look through the instruction set to see where they go and determine if it’s visible or not. Sorry I can’t help further!
@@brickcats Nevermind, figured it out! apparently they've accidentally listed the 4x4 cylinder pieces in the parts list instead of the "Technic, Disk 3 x 3", seems to be an issue in both the Republic Y-wing and AT-TE models (and potentially others too), i'll send them an email about this soon
awesome video. Do you think this atte is compatible with brickvaults dropship? And is it even better? I prefere the looks of this one regarding the legs but the brickvault version has the upper hand in the interior details
It's almost certainly not compatible although I haven't really looked into the Brick Vault version. Bousker has made a dropship as well that is compatible. Without having built BV's version I can't say with certainty which one is "better" - but I prefer the exterior visual details of Bousker's. I'm not big on interiors.
@@brickcats yep i agree on the at-te for Sure! Sadly its the different way around for the dropship 😂 I personally prefere Davids Design on BV so getting the BV Dropship and the AT-TE from Bousker but i have no information on how their Mechanisms Work 😬
I finished building this designers take on the gunship. Love the looks but it was a pain to put together. Do you think this at te is harder to build than the gunship? Greetings
@@brickcats Ok, thought so because of what you told in your Videos. I Used my tweezers Every 5 minutes in the Gunship haha. It was really really hard for me to build, the only parts i could really enjoy were the Doors, the big canons and parts of the Wings, Rest was pretty stressful. Ty :)
15:49 im currently at the step conecting the emblem to the THRE IN TRIANGULAR SHAPE placed nobs, i dont fucking get how you should do that??? Hellllp i cant fucking get it to fit
Thank you for yet another detailed and very helpful review, you're channel is a goldmine for this particular niche of mocs and custom models
This is the only AT-TE moc that gets the orientation of the footpads correct. They form an X shape rather than the + shape that all the lego sets have used
I mentioned/demonstrated it on my AT-TE mods video, and I was partially inspired by this MOC :)
Brick Vault’s also gets it right, thankfully.
"Only" might be a bit of an exaggeration...
One more excellent review
0:49 Hi, I noticed the rear leg dangling but the front ones stay in place. Then at 18:30 I noticed the rear leg staying place. Did you find a fix you can share? All 4 of my legs free float and don’t stay in place 😔
PS - I love your videos, thank you 🙏🏼. I’m going to start the Bousker dropship this month
Hey! You just kind of manipulate the legs until they are the correct position. On mine I find the "knee" joint is just a little stiffer and so I have to physically angle it to the position I want it in.
Finally found a review of this moc! Thank you so much! Subbed!
Hope you found it useful!
@@brickcats Yes it did! It showed off really well. Thanks again!
Because of you review I've decided to build this model too but change a few minor things. I've currently got 56% of the parts list (currently listed on rebrickable) found within my own collection @@brickcats
You mention all the pieces that were able to get into differen colours then listed on the page itself.
I would've been helpfull if you could've placed these specific part numbers in your description or as a comment and pinned it on this video.
I understand for now its too much of a hastle but maybe for future video's like these it could be a very nice addition 😄
@@BVLbricksthank you for this feedback. I will think of a way to try and make the recommendations more easily usable.
@@brickcats Awesome! 😄
It is simply amazing❤
I'm actually planning to get the parts for this soon so I just might use your PAB tips
Awesome review! Love the ATTE.
@brickcats 5:30 of your video adds a little bit where you don’t see the middle section flex but I think thats untrue if you watch the frames 35:20-35:22 you can see the middle portion of the at-te flexing in “STAR WARS THE CLONE WARS” animated movie from 2008
Also you can see the mid section moving while it walks up the cliffside and the at-te that peels off the cliff as it explodes at 35:43 has it’s midsection clearly flex after it falls
Also on frames 36:39-36:40 you see exactly how the at-te accomplishes it’s ability to flex
Bought it, without removing any piece I had from the list I got 150€, 7 stores so around 210€ with shipping
Amazing! I just wish there was a better way to get parts than to buy from online stores or bricklink. So hard. Would be INSANE if somebody made a website where you could buy the parts/set to mocs.
Such sites do exist but you’re usually looking at a 60-70% markup in the best case scenario to cover the labor it takes to do the sorting. It also usually takes longer to arrive because most of these businesses don’t keep sets ready to ship out on the shelf.
Do you know of them?@@brickcats
I don’t know of one that has this particular model, but The Brick Collective is probably the most well known
Im gonna go check it out then, thanks!@@brickcats
Wait, thats actually wrong, The Brick Collective only has instructions, not the moc sets@@brickcats
Great review as usual! You ever heard of the moc builder Rebel Builder? You should check out some of his TIE's, they're some of the best I've seen for a much cheaper price than Brickvault!
I have seen Rebel Builder’s models but so far I don’t love any of them. Who knows, that could change.
Are the 4 light bluish gray "Cylinder 4 x 4 x 1 2/3 with Axle Holes" visible in the finished model? asking because they're a pain in the ass to get in that colour
This piece seems to be an addition to the model in between the original build and the Brick Vault build. That said, I don’t see it in the photos and the part does come in the older light gray which is a safe pick if it does end up being visible.
I only have the original instruction set that doesn’t contain this piece, you could also look through the instruction set to see where they go and determine if it’s visible or not.
Sorry I can’t help further!
gotcha, thanks!
@@brickcats Nevermind, figured it out! apparently they've accidentally listed the 4x4 cylinder pieces in the parts list instead of the "Technic, Disk 3 x 3", seems to be an issue in both the Republic Y-wing and AT-TE models (and potentially others too), i'll send them an email about this soon
awesome video. Do you think this atte is compatible with brickvaults dropship? And is it even better? I prefere the looks of this one regarding the legs but the brickvault version has the upper hand in the interior details
It's almost certainly not compatible although I haven't really looked into the Brick Vault version. Bousker has made a dropship as well that is compatible.
Without having built BV's version I can't say with certainty which one is "better" - but I prefer the exterior visual details of Bousker's. I'm not big on interiors.
@@brickcats yep i agree on the at-te for Sure! Sadly its the different way around for the dropship 😂 I personally prefere Davids Design on BV so getting the BV Dropship and the AT-TE from Bousker but i have no information on how their Mechanisms Work 😬
I finished building this designers take on the gunship. Love the looks but it was a pain to put together. Do you think this at te is harder to build than the gunship? Greetings
I found the AT-TE a much more straight forward build than the gunship.
@@brickcats Ok, thought so because of what you told in your Videos. I Used my tweezers Every 5 minutes in the Gunship haha. It was really really hard for me to build, the only parts i could really enjoy were the Doors, the big canons and parts of the Wings, Rest was pretty stressful. Ty :)
Is the cockpit able to fit a mini or just for show?
It can fit a minifigure and possibly two, but it's tight and you can't really see them through the trans-brown bricks.
15:49 im currently at the step conecting the emblem to the THRE IN TRIANGULAR SHAPE placed nobs, i dont fucking get how you should do that???
Hellllp i cant fucking get it to fit
Would have been awesome if I watched these vids before deciding their LAAT wasn’t for me… after I built it lol
Bousker Vs Brickvault ATTE 👀
Unfortunately won’t happen any time soon!
how come you didn't show the interior in the video?
Starting at 6:24? The interior isn't that special so I didn't concentrate on it.