I always boosted mine with an OD and liked it. Finally tried a BEOD into a cleaned up(almost no gain on the amp) and I like it even better. Great demo Kyle 🤘
i've had one of these for years, gigged it tonnes of times, used it on a bunch of records. i wouldn't try and use it for mega high gain stuff, but with the gain at like 7-8 pushed by a tubescreamer it's a killer rock/punk sound.
I actually like the tone. Personally I’ve started to like filthier higain tones. Even that subtle swelling effect was actually quite cool. Disgusting bass tone, D-beat and thrash the hell out of that guitar 🤘
Seeing all these older Peavey amps like the Windsor and the VK series reminds me of playing these amps in my local music store when I was a teenager. Sadly, that store closed down years ago. Great content BTW.
I work for 1800gotjunk and i got paid to take one of these home and a b52 cab with it plus a damage control dual vaccuum tube distortion pedal. Today was a good day!!!
If you are into modding, you can easy remove this swelling effect. You correct about reason of it, so just change R29 and R38 for 10k and 22k respectively in power-feeding circuit. In addition amp will become a bit noisy and gainy.
I haven’t read all the comments. The swell in volume when you push the preamp had could be “sag”. The preamp filter caps can’t handle the power you want to draw through it. Add more preamp filter caps and it may help.
Fun! I ran one of these guys as the "dirty channel" side of my rig, and I've never heard anyone speak of the "swell". I had the exact same problem! I called it being "late" as it had the effect of making it sound like my timing was off, which took away from the overall playing experience obviously. Took it to my amp tech, who replaced couple diodes if I remember correctly, and then it started cooking power tubes. Brought it back in and upon further research he discovered that this circuit is something called "cold biased"? Long story short, he felt terrible and bought it from me, calling it a research/learning experiment. I thought the sound was usable, plenty of power, but the "swell/latency" was a deal breaker. If you want a tube amp on a budget? Save your money for a class D lunchbox.
I had an early vietnam made 5150 50 watt when they first came out. It did that exact same “swelling “ problem, wich occurred everytime i used higher output pickups. Almost like the circuit couldn’t handle the extra input gain. Fender repaired it at an authorized repair shop and said it was an early design flaw that had a specific capacitor that needed changing. Sounds like it might be in the design of the Windsor if it’s present on multiple heads. Who knows,but I definitely know what is described here, and it’s undesirable to me.
I picked up two for about $200 a piece about five years ago, and ran them stereo through a 6505 4×12 cab that I picked up for $180. I'm hating I had to give that rig up. I've seen a couple videos on here where an FJA mod helped it out immensely.
@@belligerentamateur +1 to this. I never understood the mod market. Like, I've owned a few of them and they're cool, but if you're going to spend as much as the amp costs on mods, just buy a different amp 🤣
I like the Peavey Windsor because i have the combo and IT sound good but as good as the 100 watt head but for the Price is good deal i'm an old métal head and IT rock !
I had one of these for awhile. There's a knob on the back that lets you go between class a and class ab. From what I remember, one of the settings on that sounded way better than the other, and it really affected the whole amp pretty significantly. I liked this amp way more than the valve king, which I thought sounded terrible.
A lot of people slept on the Windsor. My "Big" rig is 2 modded Windsors ran stereo into 4 USA Ampeg 412 cabs. Push the front of both with the Keeley metal zone. It's the most crushing tone I've ever experienced. The 2 biggest things I can tell you is to run it at 50 watts and there's issues with the high gain inputs. I've had 4 of these heads and haven't experienced the swelling effect you mentioned.
Dude! I had one of these back in the day with the matching 4x12. Traded a 1985 Ibanez for it and used it for several years in a church band. Great amp for the mid-gain stuff.
Marshall nut here: The Windsor does "boomer", "hair" and "Slayer" type JCM 800 tones, but I tried every boost I liked & it didn't do my brand of Zakk/Sabbath/early Metallica to my liking. Worth a shot but it is nowhere near a 1:1 JCM 800 clone. Doomers might love it, though. Would take in trade; would not seek out. Loved the Valveking, very Laney AOR100 (also a JCM800 alike).
@@robertgoyette5863 there's a lot of "Marshallesque" stuff out there. I never enjoyed anything Tubeworks did, power amps aside, but Josh Homme considers the stuff a secret weapon. Horses for courses. Be fun to be "stuck" with a Winsor and see what I come up with.
Sorry man, hasn't been my experience. Turning the amp up thins it out significantly due to the poorly spec'd power section. This has even been confirmed by people at Peavey, this was meant to be an extreme budget model. You may be confusing the speakers moving air with the amp pumping out more low end at higher volumes
I've got the Peavey Ultra Plus and the Windsor , love both but not through the same cab, the Ultra Plus loves the V30 cab but the Windsor works best in my Laney IRT cab which is less mid pushed and more Greenback..ish. The Boss SD1 is the best boost I've found for it too. I want a Marshall Greenback loaded cab, that will be great , the Windsor is a great 80s rock/metal amp for sure
In terms of low budget 800 clones, this amp could get ya through a show in a pinch, but overall I think you're right in terms of how it leaves something to be desired when compared to other peavey amps. I had one for a couple years until I upgraded.
True, I just tried out a NAM-Profile of the Windsor and even there this "overload" issue kinda recreates itself if you boost the heck out of it. But makes me also think: Got some character here.
It’s funny to me that when I was a beginning player I had one of these and got rid of it. Back then I had no idea how to EQ and amp. I kick myself thinking I missed out on really exploring my early gear.
I picked the head and matching cab up, it sounds the best with my cab with v30s. I like using a metal zone infront of the amp it comes alive with any pedal. Thanks I like seeing tone potentials with this amp!
I have had this amp for about 5 years, got it off MF daily deal new for $179. I didnt want to quit on this amp because i could hear the magic tone in there, but there were some weird frequencies that I just couldnt get rid of, I boosted it, i used the low gain input, and nothing really helped, UNTIL I got an attenuator. I'm using the cheap PS1 from Bugera. With this PS1 and a EQ in the loop this sounds amazing. Seems the key to this amp is that you need to get the master volume up around 6, but doing that without the PS1 would not work just trying to play at home (or Yankee Stadium). Once you get the master up all those weird frequencies all smooth out and it sounds killer. Oh and also run this on a 4ohm cab this also help alot as well.
A lot of people seemed to not like how it sounded I think you made it sound good, especially in the Drop C section. Also, Leeway and All Out War? You’ve won me as a subscriber
With the tone you have around the 6 minute mark, it's perfect for pushing a low gain distortion pedal. Tbh if you use something akin to a metal zone or BE-OD or whatever with the gain at 9 o'clock to push the front end, you'd probably get some pretty nice tones. Hell, if you boosted the amp with an OD like that, and turned up the gain on the overdrive, it would probably sound pretty nice, too. If you layer both of those sounds together in a quad tracking setup, it'd probably sound killer. I have a Joyo Jackman that I enjoy boosting with a metal zone, with the gain for both at 9 o'clock. I then layer that with the same amp, with the same settings, boosted with an HM-2 with the gain at 0 and everything else dimed. Or, alternately, I'll use my joyo meteor pushed with a precision drive, and then layer in the jackman boosted with the HM-2 or MT-2 as described above. Which, ngl, both of those are among my FAVORITE tones I've ever gotten.
I think you did the amp justice. I've considered getting one because they're cheap. I liked the tone you got with the actives near the end. I never really liked actives even though one of my guitars has EMGs. I intended to swap those for something else until I got a Triple XXX and suddenly it all made sense!
These used to be really popular with some touring musicians because if they broke on tour you could find one at just about any GC or on Craigslist for $150-200
Hi Kyle, I just bought one for a few hundred $ and this video will help me get the most out of my amp. Thanks I got some work to do on getting it to Kranz up some high gain tones. For what big amps cost today this was peanut money fir a big watt head. I'm 68 my friend and bought stacks in the 70,s for twice the price I paid for this head! By the way love your channel !🤘
Great video, Kyle! Ahh, yess, the Windors... it's bad, bro. haha I had to record one of these like 10 years ago, had the hardest time getting a great tone.
maaan, liked that amp always and the price point is interesting. But what the heck is that rock riff you play inspired by? I know i know it but dont get bay the name thanks!
Try to push the Master More if you want to use it like a old marshall . It needs Power amp saturstion. The preamp just so much that it still clean s by rolling down the volume and then a sd1 in Front and you have a zakk tone
So cool :) I only discovered your channel a month or so ago but I see now you have made videos for all these (maybe not universally praised) amps I have.. Windsor, rx120, .50 caliber +.. mini rectifier (mine is rectoverb 25).. I’m somebody! 😂
Great review and you made it sound great. I did hear the pumping when you used the Friedman OD. Sounds to me like a pre-tube over compressing. A good fix for that would be a 5751 in V1 probably. Thanks for the demo. I have owned one of these for years and for the money there's not a much better rock amp out there.
I think you should explore that boost button a bit more, my opinion ...I mean what it does with more master output and less gain combine with your little pedals in-front when big tubes start to glow ...
I've been curious to see you demo the Carvin X100B. I see those sold around once and a while, and the price is very affordable, but been wanting to see how you dial it for thrash and stuff! Love the channel man!
most modded amp of all times beside the valveking cause they are just unusable soundwise stock IMO but they are cheap used and easy to mod apparently so a fun project to mod! cheers 🎸🎸
I own both the original Triumph 60 and the 60 PAG, which is essentially the Ultra 60. THE PAG is a great amp, the original is useless without an EQ in the loop
This peavey amp is perfect for a starter guitarist , a young kid who has the fever to want to learn and just have fun ... 😂 Than maybe later , invest in a higher end amp... 😊
I have a 300 watt peavy bandit clearly says 300 there's no vids of it got used like 8 years ago it's a animal would love to see a review on one bought a used Windsor today
I know you've said before that you don't like these, but this video has convinced me to buy one if I can find one cheap 😂 Those mid gain sounds are awesome and I wonder if a hotmod might work better than a boost on this.
That "swelling" thing is something I've noticed on my Peavey Butcher series 2 (2010's) crunch channel with an SD-1, which so I hear is a 2203 clone circuit. I really wish you'd demo that amp. It's almost nonexistent on RUclips. I really wanted it to be an 80's thrash monster, but... it's just too clean
If boosting overwhelms the preamp I wonder what a 12AT7 in V2 would do? That said what your describing to me seem more like an under specked cap value on the master volume for what your doing
Well, it would essentially still be an issue because 12AT7 would lower the signal, lowering the gain, and you'd have to boost it harder to get to the sme gain level
@@belligerentamateur true but in v2 assuming of course that it’s even remotely like a Marshall or fender based circuit you’d already have most of the preamp gain from your boost hitting v1. I’m not saying it would work for sure but it’d be something to try again not for video purposes but just for curiosity sake
I bought one when they first came out for $199 new. Still have it and use a pod hd 500 and a jsx 4x12 cab to get some good 80’s hair metal sounds out of it. Never notice the swell you are talking about. And I feel like you have turn the master volume up more to get it really cooking
You just havem't been boosting the front end hard enough. Using a pod HD, you're probably using amp modeling in front and effects in the loop, so you wouldn't really experience it, and you're essentially bypassing the preamp and using it as a power amp, so it makes sense you wouldn'tm experience the same issues. Glad you're happy with your rig!
I have used several distortion/overdrive pedals in front of it to drive it pretty hard-Krank Distortus Maximus, US steel, MXR Fullbore Metal, etc etc. Maybe they were better when peavey first came out with them and trying to get the line going🤷🏼♂️. I will have to try it again and see if I notice it!
I keep meaning to buy one of those amps because they sound really good and are cheap! *NOTE* I like it right at the point just before real high gain. I feel like it holds really well there. Also I heard a guy's mod on his where it REALLY sounded amazing. I wish I knew who he is and what exactly he did to it.
I had no idea what you might've meant by the swelling thing, but as soon as I heard it I was like wtf 😂 it's almost like a noise gate turned up too high and acting weird or something. I think with some mods and tweaking this amp could definitely reach it's full potential, but by the time you sink the money or time into that you might as well buy or build an amp from scratch because I don't know how much Windsor would be left aside from the chassis and head shell 😂
Dude I love ur reviews. But I’m old and old school tone. That Windsor does the job. Most guys my age 60 years. Think that’s insane . But I take the view of have a 1000 % ability. And cruise at 30% . God Bless
Interesting. There's a local store selling one of these for $300. I don't really have anything that gives me a JCM 800-ish tone. All the Demos made me think my Revv G120 III would do it, but I find it's just very underwhelming.
It's fuzzy and flubby.I know there are some sick mods out there for these guys but at that point, if you have to pay for them, may as well just buy a Marshall or similar. Damn shame. Sounds better with the boosts but that swelling stinks and it's still super dark. I have a feeling it will get absolutely devoured in a band mix.
@@dsddsdd7566 heard those 1990's are killer. The fact that they're not all over the used market is a good indicator of that. Nobody is rushing to get rid of them hahaha.
Maybe im wrong here, but i like amps that have useable tones on the entire sweep of every control. I get that some people like extreme settings, but at least make most of the settings useable. There are a few amps out there that are really easy to make sound like dog shit.
@@belligerentamateur Haha…i thought you’d catch that. I played boosted Rectifiers for like 15 yrs, but yeah, they are a perfect example of an amp that does NOT have fully useable tones on the full sweep of the tone stack. Definitely ironic.but once u find that sweet spot there’s nothing on the planet like it.
I appreciate you demoing all these peavey amps you don't see in stores too often kyle, thanks dude
For dure dude, happy to do it!
“Go ahead and leave me an angry comment, and if this is your first time here I look forward to your complaints” 🤣😂 legendary
I always boosted mine with an OD and liked it. Finally tried a BEOD into a cleaned up(almost no gain on the amp) and I like it even better.
Great demo Kyle 🤘
i've had one of these for years, gigged it tonnes of times, used it on a bunch of records. i wouldn't try and use it for mega high gain stuff, but with the gain at like 7-8 pushed by a tubescreamer it's a killer rock/punk sound.
Part of why I subscribe is because I love your humor
Appreciate you
I actually like the tone. Personally I’ve started to like filthier higain tones. Even that subtle swelling effect was actually quite cool. Disgusting bass tone, D-beat and thrash the hell out of that guitar 🤘
I love how you snuck in that Coheed riff!
Seeing all these older Peavey amps like the Windsor and the VK series reminds me of playing these amps in my local music store when I was a teenager. Sadly, that store closed down years ago. Great content BTW.
I’ve had two, Only have one now, it’s got Mesa Boogie EL34 power tubes, and imo, Just perfect.
it’s by far my number one 🎉
Sounds pretty awesome. Definitely nails that 80s metal tone.
Love that you played leeway for the tone review. Hailz!
I like the tones here. I play a lot of metal, but I don't use as much gain as most. I think I need to check one of these out. Thanks for the demo.
I work for 1800gotjunk and i got paid to take one of these home and a b52 cab with it plus a damage control dual vaccuum tube distortion pedal. Today was a good day!!!
If you are into modding, you can easy remove this swelling effect. You correct about reason of it, so just change R29 and R38 for 10k and 22k respectively in power-feeding circuit. In addition amp will become a bit noisy and gainy.
Kyle I just got myself a MXR super badass thanks to you.
I have tons of OD's and now I know why you like the pedal.
Keep up the good work.
Nice man! the super badass is a distortion though, I use the Badass Overdrve
@@belligerentamateur Thats what I meant. It was late lol
I had one of these. Got the whole half stack brand new for like $400 in 2009.
I haven’t read all the comments. The swell in volume when you push the preamp had could be “sag”. The preamp filter caps can’t handle the power you want to draw through it. Add more preamp filter caps and it may help.
Fun! I ran one of these guys as the "dirty channel" side of my rig, and I've never heard anyone speak of the "swell". I had the exact same problem! I called it being "late" as it had the effect of making it sound like my timing was off, which took away from the overall playing experience obviously. Took it to my amp tech, who replaced couple diodes if I remember correctly, and then it started cooking power tubes. Brought it back in and upon further research he discovered that this circuit is something called "cold biased"? Long story short, he felt terrible and bought it from me, calling it a research/learning experiment. I thought the sound was usable, plenty of power, but the "swell/latency" was a deal breaker. If you want a tube amp on a budget? Save your money for a class D lunchbox.
I had an early vietnam made 5150 50 watt when they first came out. It did that exact same “swelling “ problem, wich occurred everytime i used higher output pickups. Almost like the circuit couldn’t handle the extra input gain. Fender repaired it at an authorized repair shop and said it was an early design flaw that had a specific capacitor that needed changing. Sounds like it might be in the design of the Windsor if it’s present on multiple heads. Who knows,but I definitely know what is described here, and it’s undesirable to me.
Sounds like the Wampler Sovereign, otherwise a really nice IIC+ innabox
I picked up two for about $200 a piece about five years ago, and ran them stereo through a 6505 4×12 cab that I picked up for $180. I'm hating I had to give that rig up. I've seen a couple videos on here where an FJA mod helped it out immensely.
only problem with FJA mods is they typically cost more than the amp itself. haha
@@belligerentamateur +1 to this. I never understood the mod market. Like, I've owned a few of them and they're cool, but if you're going to spend as much as the amp costs on mods, just buy a different amp 🤣
I like the Peavey Windsor because i have the combo and IT sound good but as good as the 100 watt head but for the Price is good deal i'm an old métal head and IT rock !
Oh ya band width is a problem with my dsl as well I just deal with it but I got some killer tones and for under $1000
I had one of these for awhile. There's a knob on the back that lets you go between class a and class ab. From what I remember, one of the settings on that sounded way better than the other, and it really affected the whole amp pretty significantly. I liked this amp way more than the valve king, which I thought sounded terrible.
A lot of people slept on the Windsor. My "Big" rig is 2 modded Windsors ran stereo into 4 USA Ampeg 412 cabs. Push the front of both with the Keeley metal zone. It's the most crushing tone I've ever experienced. The 2 biggest things I can tell you is to run it at 50 watts and there's issues with the high gain inputs. I've had 4 of these heads and haven't experienced the swelling effect you mentioned.
I just bought one for $149, I am more than satisfied.
Dude! I had one of these back in the day with the matching 4x12. Traded a 1985 Ibanez for it and used it for several years in a church band. Great amp for the mid-gain stuff.
Agree it does that stuff well
Marshall nut here:
The Windsor does "boomer", "hair" and "Slayer" type JCM 800 tones, but I tried every boost I liked & it didn't do my brand of Zakk/Sabbath/early Metallica to my liking.
Worth a shot but it is nowhere near a 1:1 JCM 800 clone. Doomers might love it, though.
Would take in trade; would not seek out.
Loved the Valveking, very Laney AOR100 (also a JCM800 alike).
i couldnt get a good sound with it with any pedal other than a boss os2. but dialed in perfectly it sounds killer
@@robertgoyette5863 there's a lot of "Marshallesque" stuff out there.
I never enjoyed anything Tubeworks did, power amps aside, but Josh Homme considers the stuff a secret weapon.
Horses for courses. Be fun to be "stuck" with a Winsor and see what I come up with.
I like that I can comment prematurely. Ready for another sick amp video!
and to get more low-end punch you need to get the master volume up tp about 4-6 and then the amp comes more alive
Sorry man, hasn't been my experience. Turning the amp up thins it out significantly due to the poorly spec'd power section. This has even been confirmed by people at Peavey, this was meant to be an extreme budget model. You may be confusing the speakers moving air with the amp pumping out more low end at higher volumes
Amazing amp for the money. Is it a JCM killer? Nah, but it’s good enough. Not to mention it’s like $200 and at every pawn shop in America!
Killer? Lol no, but if you like MIIIIDDDDDSSSS it has em. I like scoopier Marshall tones, it doesn't really do this.
I've got the Peavey Ultra Plus and the Windsor , love both but not through the same cab, the Ultra Plus loves the V30 cab but the Windsor works best in my Laney IRT cab which is less mid pushed and more Greenback..ish. The Boss SD1 is the best boost I've found for it too. I want a Marshall Greenback loaded cab, that will be great , the Windsor is a great 80s rock/metal amp for sure
In terms of low budget 800 clones, this amp could get ya through a show in a pinch, but overall I think you're right in terms of how it leaves something to be desired when compared to other peavey amps. I had one for a couple years until I upgraded.
True, I just tried out a NAM-Profile of the Windsor and even there this "overload" issue kinda recreates itself if you boost the heck out of it. But makes me also think: Got some character here.
Sounds good to me
It’s funny to me that when I was a beginning player I had one of these and got rid of it. Back then I had no idea how to EQ and amp. I kick myself thinking I missed out on really exploring my early gear.
I really like this power amp. I plug other higher gain preamps into it and it has a unique brutal sizzle
I picked the head and matching cab up, it sounds the best with my cab with v30s. I like using a metal zone infront of the amp it comes alive with any pedal. Thanks I like seeing tone potentials with this amp!
Adding to my original post, I tried the mxr super baddass od wow sounds awesome.
I have had this amp for about 5 years, got it off MF daily deal new for $179. I didnt want to quit on this amp because i could hear the magic tone in there, but there were some weird frequencies that I just couldnt get rid of, I boosted it, i used the low gain input, and nothing really helped, UNTIL I got an attenuator. I'm using the cheap PS1 from Bugera. With this PS1 and a EQ in the loop this sounds amazing. Seems the key to this amp is that you need to get the master volume up around 6, but doing that without the PS1 would not work just trying to play at home (or Yankee Stadium). Once you get the master up all those weird frequencies all smooth out and it sounds killer. Oh and also run this on a 4ohm cab this also help alot as well.
Damn Kyle got Style!
A lot of people seemed to not like how it sounded I think you made it sound good, especially in the Drop C section. Also, Leeway and All Out War? You’ve won me as a subscriber
My man. Glad you recognized the riffs!
With the tone you have around the 6 minute mark, it's perfect for pushing a low gain distortion pedal. Tbh if you use something akin to a metal zone or BE-OD or whatever with the gain at 9 o'clock to push the front end, you'd probably get some pretty nice tones. Hell, if you boosted the amp with an OD like that, and turned up the gain on the overdrive, it would probably sound pretty nice, too. If you layer both of those sounds together in a quad tracking setup, it'd probably sound killer. I have a Joyo Jackman that I enjoy boosting with a metal zone, with the gain for both at 9 o'clock. I then layer that with the same amp, with the same settings, boosted with an HM-2 with the gain at 0 and everything else dimed. Or, alternately, I'll use my joyo meteor pushed with a precision drive, and then layer in the jackman boosted with the HM-2 or MT-2 as described above. Which, ngl, both of those are among my FAVORITE tones I've ever gotten.
I think you did the amp justice. I've considered getting one because they're cheap. I liked the tone you got with the actives near the end. I never really liked actives even though one of my guitars has EMGs. I intended to swap those for something else until I got a Triple XXX and suddenly it all made sense!
These used to be really popular with some touring musicians because if they broke on tour you could find one at just about any GC or on Craigslist for $150-200
Your beginning description about that overloading sound is like maxing the RAT pedals distortion knob
Alice Cooper songs had some great riffs!
Hi Kyle, I just bought one for a few hundred $ and this video will help me get the most out of my amp. Thanks I got some work to do on getting it to Kranz up some high gain tones. For what big amps cost today this was peanut money fir a big watt head. I'm 68 my friend and bought stacks in the 70,s for twice the price I paid for this head! By the way love your channel !🤘
Enjoy man!
I just bought one of these and really digging it. You gave me a bunch of ideas, thanks :)
enjoy!
Great video, Kyle! Ahh, yess, the Windors... it's bad, bro. haha I had to record one of these like 10 years ago, had the hardest time getting a great tone.
Yrah I never understood the love for these amps from metal guys. Rock dudes, makes a lot more sense
I use mine as a power amp witha a gsp1101 in the return. And i love my setup.
Some legit tones there
maaan, liked that amp always and the price point is interesting. But what the heck is that rock riff you play inspired by? I know i know it but dont get bay the name thanks!
Try to push the Master More if you want to use it like a old marshall . It needs Power amp saturstion. The preamp just so much that it still clean s by rolling down the volume and then a sd1 in Front and you have a zakk tone
I love your Channel!!
I own a windsor and i love it when it is very loud!
Goood job bro!!
Thansk Jason!!
"Oooh that's a right proper valve amp you got there Guv'nor."
Was that a pinch harmonic at :33 seconds in? We need a longer bend sir! :D
Great assessment of the amp. I think I’m gonna buy one tomorrow.
Man thanks you so much been asking for this review for ssssssssoooo long brother Kyle your the goat ❤🤘🏻🤘🏻🔥🔥
Picked up one of these China amps for 150 bucks good poor mans Swamp Thrash amp kinda 800 ish.
Sold it for 275
Hey man, any idea when the Mesa 50 Cal video will be up?
Honestly I have always been really impressed with the M77. It is now the only overdrive that I own.
So damn good man
So cool :) I only discovered your channel a month or so ago but I see now you have made videos for all these (maybe not universally praised) amps I have.. Windsor, rx120, .50 caliber +.. mini rectifier (mine is rectoverb 25).. I’m somebody! 😂
Great review and you made it sound great. I did hear the pumping when you used the Friedman OD. Sounds to me like a pre-tube over compressing. A good fix for that would be a 5751 in V1 probably. Thanks for the demo. I have owned one of these for years and for the money there's not a much better rock amp out there.
Leeway. Nice
YES
I think you should explore that boost button a bit more, my opinion ...I mean what it does with more master output and less gain combine with your little pedals in-front when big tubes start to glow ...
No thanks!
Nice job with the Coheed Riff! 😂
This amp doesn’t sound too bad. Might be a good beginner amp.
I've been curious to see you demo the Carvin X100B. I see those sold around once and a while, and the price is very affordable, but been wanting to see how you dial it for thrash and stuff! Love the channel man!
most modded amp of all times beside the valveking cause they are just unusable soundwise stock IMO but they are cheap used and easy to mod apparently so a fun project to mod! cheers 🎸🎸
No doubt, I sold this one but I'll track another down and do a mod video
@@belligerentamateur
Any chance on getting a laney gh review? Thanks kyle!
Also loved that little title fight riff you played!
You bet! I have one here right now
@@belligerentamateur yes dude! Thats my fav amp right there, i own a gh50l and i love it so much, wondering what your thoughts are
Thank you for the title fight riff
The other guitarist in my band uses one of these with a rat. Sounds super mushy but it evens out our sound since I have a KSR and it's super tight
If you can get your hands on one a peavey triumph 120 tube amp was awesome. I used one with and ADA MP1 through a Marshall 1960 cab. It was great.
I own both the original Triumph 60 and the 60 PAG, which is essentially the Ultra 60. THE PAG is a great amp, the original is useless without an EQ in the loop
This peavey amp is perfect for a starter guitarist , a young kid who has the fever to want to learn and just have fun ... 😂 Than maybe later , invest in a higher end amp... 😊
Have that amp modded and you got crazy value for money.
I got a couple of years ago for 250 AUD. Ultimate amp for Doom and Stoner Rock on a budget.
I have a 300 watt peavy bandit clearly says 300 there's no vids of it got used like 8 years ago it's a animal would love to see a review on one bought a used Windsor today
I know you've said before that you don't like these, but this video has convinced me to buy one if I can find one cheap 😂 Those mid gain sounds are awesome and I wonder if a hotmod might work better than a boost on this.
That "swelling" thing is something I've noticed on my Peavey Butcher series 2 (2010's) crunch channel with an SD-1, which so I hear is a 2203 clone circuit.
I really wish you'd demo that amp. It's almost nonexistent on RUclips. I really wanted it to be an 80's thrash monster, but... it's just too clean
Man I'd love to, but they're almost non existent in the real world, too! Lol
If boosting overwhelms the preamp I wonder what a 12AT7 in V2 would do? That said what your describing to me seem more like an under specked cap value on the master volume for what your doing
Well, it would essentially still be an issue because 12AT7 would lower the signal, lowering the gain, and you'd have to boost it harder to get to the sme gain level
@@belligerentamateur true but in v2 assuming of course that it’s even remotely like a Marshall or fender based circuit you’d already have most of the preamp gain from your boost hitting v1. I’m not saying it would work for sure but it’d be something to try again not for video purposes but just for curiosity sake
The most solid state feeling/sounding tube amp I have ever played.
I bought one when they first came out for $199 new. Still have it and use a pod hd 500 and a jsx 4x12 cab to get some good 80’s hair metal sounds out of it. Never notice the swell you are talking about. And I feel like you have turn the master volume up more to get it really cooking
You just havem't been boosting the front end hard enough. Using a pod HD, you're probably using amp modeling in front and effects in the loop, so you wouldn't really experience it, and you're essentially bypassing the preamp and using it as a power amp, so it makes sense you wouldn'tm experience the same issues. Glad you're happy with your rig!
I have used several distortion/overdrive pedals in front of it to drive it pretty hard-Krank Distortus Maximus, US steel, MXR Fullbore Metal, etc etc. Maybe they were better when peavey first came out with them and trying to get the line going🤷🏼♂️. I will have to try it again and see if I notice it!
@@s.manuel7969 listen at 15:27
title fight mentioned
fully regret not grabbing one of these when they were being firesaled when the dealership ended here :(
I heard a 74 jailbreak acdc tone.with low gain.Not quite but close
I keep meaning to buy one of those amps because they sound really good and are cheap!
*NOTE*
I like it right at the point just before real high gain. I feel like it holds really well there.
Also I heard a guy's mod on his where it REALLY sounded amazing. I wish I knew who he is and what exactly he did to it.
I bet they'd sound good for like a Clutch midgain tone, lotta mids, not too saturated
Ofc that fucks me bc lol I love saturation
@@rocketpigrecords3719 Yeah I'm definitely feeling this tone! I love that dropped C shit! That kicked my ass!
Throwing down some Leeway in there? 👀👀
I had no idea what you might've meant by the swelling thing, but as soon as I heard it I was like wtf 😂 it's almost like a noise gate turned up too high and acting weird or something. I think with some mods and tweaking this amp could definitely reach it's full potential, but by the time you sink the money or time into that you might as well buy or build an amp from scratch because I don't know how much Windsor would be left aside from the chassis and head shell 😂
Sounds way better than the jcm800
Only a matter of time before these go through the roof
Aaaye loud and clear by title fight!!
nailed it
Dude I love ur reviews.
But I’m old and old school tone. That Windsor does the job. Most guys my age 60 years. Think that’s insane . But I take the view of have a 1000 % ability.
And cruise at 30% . God Bless
Great tone from this !!! 🤘🤘🤔🤔
My secret weapon bass head
Interesting. There's a local store selling one of these for $300. I don't really have anything that gives me a JCM 800-ish tone. All the Demos made me think my Revv G120 III would do it, but I find it's just very underwhelming.
It's fuzzy and flubby.I know there are some sick mods out there for these guys but at that point, if you have to pay for them, may as well just buy a Marshall or similar. Damn shame. Sounds better with the boosts but that swelling stinks and it's still super dark. I have a feeling it will get absolutely devoured in a band mix.
True, for example you can get like used bugera 1990 infinium for cheap, and it's a great amp really. Windsor is flubby mess with no attack.
@@dsddsdd7566 heard those 1990's are killer. The fact that they're not all over the used market is a good indicator of that. Nobody is rushing to get rid of them hahaha.
@@ChristianRasmussen666 that's odd bc I still had Dual Reverb 900s
SLX single channels are TITS though
You should compare this to a Butcher, I’ve heard that a Butcher is also supposed to be like a JCM 800
Deffinately sounds better with pedals.
Good video but the amp sounds flabby as hell on its own. The MXR pedal really spiced things up but still.....
SD-1 and marshall circuits, like lamb and tuna fish
His teeth were made of wool
Maybe im wrong here, but i like amps that have useable tones on the entire sweep of every control. I get that some people like extreme settings, but at least make most of the settings useable. There are a few amps out there that are really easy to make sound like dog shit.
I totally get what you mean, but I also find it ironic considering you have "boogie" in your username, haha
@@belligerentamateur
Haha…i thought you’d catch that. I played boosted Rectifiers for like 15 yrs, but yeah, they are a perfect example of an amp that does NOT have fully useable tones on the full sweep of the tone stack. Definitely ironic.but once u find that sweet spot there’s nothing on the planet like it.
@@Boogieplex fully agreed
Sold me on it with the title fight riff lol