This is the best video on ipv6 for CCNA, i passed my CCNA this month. All ipv6 questions were easy attempts because of this Video... I hope everyone who is preparing for ccna finds this gem
IPv6 and OSPF was the part of the CCNA that started to get really heavy for me. This video was short but very precise to what I needed. No "funnyman" or time waste, straight to the point. Thank you so much! You have a new subscriber
Dan, I know gratitude doesn't pay the bills, but thanks so much for all your work! One of your old old whiteboard videos about subnetting made me get it quickly back when all of my 200-301classmates couldn't get it, and to this day it is simple to do in my head. thank you!
I was searching for this video for years. I've watched tens of videos that explained IPv6 for beginners but all so arid, nothing to understand in a "human readable" information. After watching your video I have finally understood the logic behind IPv6 address. Thank you for doing a great job!
from all the videos targeting IPv6, this one is definitly one of my favourites and helped me out big time. Clear voice, clear and good to understand explanations, nice transitions, even better examples...
Just beginning my journey in Networking. From your video, I discovered where to place the zero(s) in compressed IPv6 addresses. Sometimes reading texts can be confusing. I'm a visual learner and your RUclips video is very informative and educational. Thank~You Dan.
Dan, your a natural teacher and I've been watching your videos for a while now whilst completing my Netacad Cisco switching and routing degree. As said before me, these courses are too good to be free but I speak on behalf of myself and im sure the others, we appreciate the time and effort you put in to spreading this good work online! Cheers again
I have to agree with some of the folks on this thread and say that you have a gift for teaching, free or paid, you have some of the best information out on the net, i test this week and ive been using your videos since day one, thank you.
Fun little experiment I did. I have 2 LAN adaptors on both my machines. I run all IPV6 traffic thru one adaptor, and the IPV4 thru the other on each machine. Not only does it provide a bit of load balancing, it gives you an idea of how much IPV6 is TRULY used as of today. For me and my network, IPV6 is double the traffic of IPV4. This is reflected in the amount of data each adaptor handles.
Used to hate slide teaching techniques in college, but this is way too good that too for topic with very less resources online. Keep it up! Thanks a lot.
Hey man...this video helped me to understand how to find the network portion of the IPv6 address. You showing the binary version of the address made a light bulb go on my brain. Before watching this I couldn't figure how to find the network portion when the prefix is not a multiple of 56. But now I got a solid understanding thanks to you. 😀 Hope to see more content from you.
Dan, thank you so much for this amazing explanation! I've learned so much from your video's in such a short time considering. With watching most of your video's I think it's been a maximum of 5-6 hours. In those 5-6 hours I've learned more from you then from my Cisco teacher who has tried explaining the basics to the entire class, however I've been miles and miles ahead because of your amazing video's!. Thank you so much for putting all this effort and your time into educating other people with more networking knowledge. Greetings from a thankful young student out of The Netherlands! (17)
Hey Dan! Thank you very much for this video. I know for sure that the IPV6 part of the exam was what kicked my butt. I'm very glad that I did a process of elimination and chose SLAAC on my last question haha. Sadly, I only scored 800 on my first CCNA exam. Just 25 more points and I would have passed.
This is a great video and resources. The go through is perfect, the slides helps a lot and you also provide the slides! It was a long time ago I saw a video this perfect for what I needed to get started with something new. Thanks!
Dan, Excellent intro to IPv6, and I watched through with great interest. Just a minor correction: The 6 hextets for all-solicited nodes multicast will be 6 x 4 = 24 and not 28, which is mentioned on slides 9 and 11.
Thanks a lot for this video, helped a ton! Super clear explanation, but not boring or slow. Was able to understand everything was it was said. Nice visuals too. Appreciate it!
Hello Dan: As always enjoying your teaching. Could you please explain more about the Solicited Nodes Multicast Address??? Would be nice a full video about that subject ;) Thanks for your amazing legacy to the Network Industry. I love your work and Im so grateful for what I'm learning from you.
Great video. One modification. In IPv6 Slaac Slide, in the first column "message", please update the sentence as " Similar to ARP in IPv4" instead of IPv6.
That is one of the briefest and on-point explanation. Thanks a lot. But I do have a question, I am getting the feeling that IPv6 is autoconfigured by devices, which means other than learning subnetting, as a network administrator, all you need to do is provide your IPv6 subnet and the device will handle the rest. am I right?
Great video and well explained, but I find the yellow circle pointer distracting. For me it makes the text under it more difficult to read. Might just be me though.
After careful consideration I've decided that IPv6 is a gigantic clusterfuck of an ill-conceived attempt to resolve a problem that just by sheer luck happens to actually work. A perfect example of what you get by just bolting random bits to a shed until you just happen to make a car.
Very nicely done! But, RAs support DNS configuration ... maybe they didn't when the video was made? but in any case, now they do for sure. How I know: I run PiHole as my gateway which I believe does both DHCPv6 and RA, but using Wireshark, I can see the DNS server listed in the RA as a RDNS server, So, goodbye DHCP! ... though I think a lot of people (ISPs included) still do DHCP for the familiarity to IPv4.
This stuff doesn't start making sense until you starting seeing how it is implemented on a network. There's a reason why it's taking so long to release it.
Are you saying it is taking long to release because no one understands how to use it? Untill they start using it... I am writing a paper on why it has been taking so long to implement
Big facts, I'm just starting to learn about computer science on my own and I keep seeing the term ipv6 here and there. I thought if I could find a video explaining it then i would be able to understand it, boy was I wrong. I am lost as shit haha. Do you know a starting point to help me get to a point where I can understand whats going on in this video?
I don't think thats the issue here .. its just that we still have some IPv4 left to play with . The moment we run out of IPv4 , there will be no way to connect to the world until you use your IPv6 address .
@8-04 you were explaining that end-user i.e. corporate company can make use of hextests from /48 to /64 can be used to do subnet, which mean I could have 65536 subnets by the use of one /16 hextests ? Please confirm, my understanding?
Hi Dan, At about 26:47 you speak to configuring the Link-Local address. I thought that once you configure the Global-Unicast address, that the router automatically configures it’s own Link-Local address❓
Are /32 (v4) and /128 (v6) networks usefull outside loopbacks? I don't really get the "network of one" idea. It only works if you don't need default gateway and broadcast (v6 has no broadcast). Is there any other purpose than network testing?
This is the best video on ipv6 for CCNA, i passed my CCNA this month. All ipv6 questions were easy attempts because of this Video... I hope everyone who is preparing for ccna finds this gem
Are you working now as a network engineer? What other certs you have?
@@seanknight9808 He's flipping burgers 🍔 at McDonald's 🤡. But don't hate on him. Because he makes a mean burger 🍔 😋
Hey can you help me convert my Wi-Fi from ipv4 to ipv6? I have 0 clue
Glad to hear that. Congratulations!
Brother, thank you. This is literally 3 chapters out of the Cisco book for CCNA and you explained most of the things going over my head.
IPv6 and OSPF was the part of the CCNA that started to get really heavy for me. This video was short but very precise to what I needed. No "funnyman" or time waste, straight to the point. Thank you so much! You have a new subscriber
Dan, I know gratitude doesn't pay the bills, but thanks so much for all your work! One of your old old whiteboard videos about subnetting made me get it quickly back when all of my 200-301classmates couldn't get it, and to this day it is simple to do in my head. thank you!
This is the most concise video I have found on this subject. Hat off.
I was searching for this video for years. I've watched tens of videos that explained IPv6 for beginners but all so arid, nothing to understand in a "human readable" information. After watching your video I have finally understood the logic behind IPv6 address. Thank you for doing a great job!
from all the videos targeting IPv6, this one is definitly one of my favourites and helped me out big time.
Clear voice, clear and good to understand explanations, nice transitions, even better examples...
Hey can you help me convert my Wi-Fi from ipv4 to ipv6? I have 0 clue on how to do it :(
Just beginning my journey in Networking. From your video, I discovered where to place the zero(s) in compressed IPv6 addresses. Sometimes reading texts can be confusing. I'm a visual learner and your RUclips video is very informative and educational. Thank~You Dan.
Dan, your a natural teacher and I've been watching your videos for a while now whilst completing my Netacad Cisco switching and routing degree. As said before me, these courses are too good to be free but I speak on behalf of myself and im sure the others, we appreciate the time and effort you put in to spreading this good work online! Cheers again
Completely agree with this. I was dreading learning IPV6 but this is presented very clearly and succinctly.
you're!!! not your...
I have to agree with some of the folks on this thread and say that you have a gift for teaching, free or paid, you have some of the best information out on the net, i test this week and ive been using your videos since day one, thank you.
how the test go?
Pass ccna 200-125, first try
I just love Mr. Dan’s way of teaching 💯
Fun little experiment I did. I have 2 LAN adaptors on both my machines. I run all IPV6 traffic thru one adaptor, and the IPV4 thru the other on each machine. Not only does it provide a bit of load balancing, it gives you an idea of how much IPV6 is TRULY used as of today. For me and my network, IPV6 is double the traffic of IPV4. This is reflected in the amount of data each adaptor handles.
Used to hate slide teaching techniques in college, but this is way too good that too for topic with very less resources online. Keep it up! Thanks a lot.
Hey man...this video helped me to understand how to find the network portion of the IPv6 address. You showing the binary version of the address made a light bulb go on my brain.
Before watching this I couldn't figure how to find the network portion when the prefix is not a multiple of 56. But now I got a solid understanding thanks to you. 😀 Hope to see more content from you.
This is the Ipv6 video I have been looking for, easy to understand with the tables format, hats off Dan 👍.
Dan, I am a big fan of you, thank you so much 4 everything, I have learned much more with your videos, than going to clases!!!
Have you met ipv6 builder?
Thank you Mr Dan, your courses are awesome, you are a teacher by nature.
I think I finally understood the fundamentals of Ipv6. Thank you!
This is a great tutorial! Cudos to the presenter for a concise presentation!
This video is a great clarification of IPv6 characteristics. Thank you so much.
Awesome,
Simple, clear and to the point.
Thank you
Best Explaination i have ever saw Thanks a lot to you
Thank you. Your videos are always comprehensive.
Such a good explanation! ❤️❤️❤️ this man is a teacher by heart 🔥
Dan, thank you so much for this amazing explanation!
I've learned so much from your video's in such a short time considering. With watching most of your video's I think it's been a maximum of 5-6 hours.
In those 5-6 hours I've learned more from you then from my Cisco teacher who has tried explaining the basics to the entire class, however I've been miles and miles ahead because of your amazing video's!.
Thank you so much for putting all this effort and your time into educating other people with more networking knowledge.
Greetings from a thankful young student out of The Netherlands! (17)
Explained it so well! Can't thank you enough - best IPv6 video I have ever come across
Hey Dan! Thank you very much for this video. I know for sure that the IPV6 part of the exam was what kicked my butt. I'm very glad that I did a process of elimination and chose SLAAC on my last question haha. Sadly, I only scored 800 on my first CCNA exam. Just 25 more points and I would have passed.
Awesome explanation! Thank you for your time! Much easier to grasp than the uCertify Net+ course
Thank you Sir. Concise but straight to the point and easily understand.
by far the best explantation over IPv6, thanks
Thanks Nasser!
One of the best videos I’ve seen. Great explanation
This is a great video and resources. The go through is perfect, the slides helps a lot and you also provide the slides! It was a long time ago I saw a video this perfect for what I needed to get started with something new. Thanks!
Very Good. Clear and Concise.
Best IPv6 video I've seen. Great Job
GREAT video and THANK YOU for posting the slides!
Lovely tutorial. Concepts simply explained.
thank you for the great ipv6 info. well organized.
Thank you very much for this, it's the best one I've come across and I have been looking all day! Huge relief :)
Dan, Excellent intro to IPv6, and I watched through with great interest.
Just a minor correction: The 6 hextets for all-solicited nodes multicast will be 6 x 4 = 24 and not 28, which is mentioned on slides 9 and 11.
i was almost raging, because i couldnt find the error in my calculation xD
Minute 3:00 there should be 12 instead of 10 too right?
Dan you're the man!! Thanks for this informative video.
Thanks a lot for this video, helped a ton! Super clear explanation, but not boring or slow. Was able to understand everything was it was said. Nice visuals too. Appreciate it!
Awesome video thank you for sharing some experience and knowledge.
Very informative! Thank you so much for creating this.
Great course. Thank you!
Hello Dan: As always enjoying your teaching.
Could you please explain more about the Solicited Nodes Multicast Address??? Would be nice a full video about that subject ;) Thanks for your amazing legacy to the Network Industry. I love your work and Im so grateful for what I'm learning from you.
Thanks for the Video! Helped simplify IPv6.
Comments for statistics. Thanks for sharing the information. Love you
Beautiful presentation
Very detailed explanation! Thanks!
woops so you are the man ! now the sound has a face with it !
Thank you. I benefited a lot from this video.
Great video. One modification. In IPv6 Slaac Slide, in the first column "message", please update the sentence as " Similar to ARP in IPv4" instead of IPv6.
Really great video. Thanks for sharing.
thank it's helped me to undrestand well icmpv6 (RS AND RA)
thank you for teaching me sir. 🎈🙂❤👍🎈
Very detailed viedo!
Thank you!
Dan, adamın hası. Hiç boş yapmadan anlatmış.
Very nice and useful video, THX.
Great Video. Thanks Dan.
THANK you for this video.
Keep it going sir!
Very well Explained. Thanks
great teacher
Excellent. Thank you.
Very helpful!
Wow... that is a lot of info... I'm trying to understand it... but it's a lot
Great information, thanks!
Vert informative
Thanks. Very good.
@ 20.8 Its the last 24 bits of the destination host link local address
That is one of the briefest and on-point explanation. Thanks a lot.
But I do have a question, I am getting the feeling that IPv6 is autoconfigured by devices, which means other than learning subnetting, as a network administrator, all you need to do is provide your IPv6 subnet and the device will handle the rest.
am I right?
Awesome thankyou.
Excelente
Thank you 🙏
Great video and well explained, but I find the yellow circle pointer distracting. For me it makes the text under it more difficult to read. Might just be me though.
19:15 Similar to ARP in IPv4.
Amazing
excellent!!
thank you so much!
Thanks a lot
Thanks for the video, but the decimal place is in the wrong position between the 2nd and 3rd octet of the binary conversion of the IPv4 address
After careful consideration I've decided that IPv6 is a gigantic clusterfuck of an ill-conceived attempt to resolve a problem that just by sheer luck happens to actually work. A perfect example of what you get by just bolting random bits to a shed until you just happen to make a car.
Thank you
Very nice thank you!
See you back here in 2030 when this has been rolled out
I live in Hot Springs, Arkansas population ~32,000. My AT&T 100 Mbps VDSL2 connection has had dual stack native ipv6 for 2 or 3 years now.
Thank you for the video sir
Thank you!!
Very nicely done! But, RAs support DNS configuration ... maybe they didn't when the video was made? but in any case, now they do for sure. How I know: I run PiHole as my gateway which I believe does both DHCPv6 and RA, but using Wireshark, I can see the DNS server listed in the RA as a RDNS server, So, goodbye DHCP! ... though I think a lot of people (ISPs included) still do DHCP for the familiarity to IPv4.
Thanks
ipv6 builder is for you, automatic ipv6 installer also in one click
Hi Dan its nice video and very informative. Could you pls also explain why is the 7th bit flipped while auto configuring the EUI-64 address.
The gist of it.
This stuff doesn't start making sense until you starting seeing how it is implemented on a network. There's a reason why it's taking so long to release it.
Are you saying it is taking long to release because no one understands how to use it? Untill they start using it... I am writing a paper on why it has been taking so long to implement
Big facts, I'm just starting to learn about computer science on my own and I keep seeing the term ipv6 here and there. I thought if I could find a video explaining it then i would be able to understand it, boy was I wrong. I am lost as shit haha. Do you know a starting point to help me get to a point where I can understand whats going on in this video?
I don't think thats the issue here .. its just that we still have some IPv4 left to play with . The moment we run out of IPv4 , there will be no way to connect to the world until you use your IPv6 address .
@@dzmetal6021 Go learn IPv4. It's more simple and everyone knows about it. Then IPv6 will start making sense to you.
Bro i like your videos, but can you make a playlist for ccna 200-301? i am new and i wanna learn ccna and sit for the exam.
@8-04 you were explaining that end-user i.e. corporate company can make use of hextests from /48 to /64 can be used to do subnet, which mean I could have 65536 subnets by the use of one /16 hextests ? Please confirm, my understanding?
Hi Dan,
At about 26:47 you speak to configuring the Link-Local address. I thought that once you configure the Global-Unicast address, that the router automatically configures it’s own Link-Local address❓
20-30 years later... IPv6 adresses used up = everyone shocked :O
QUESTION:
In the 3rd hextet (the SUBNET)…
Can the administrator use the 0000 HEXTET as a useable subnet !?
Are /32 (v4) and /128 (v6) networks usefull outside loopbacks? I don't really get the "network of one" idea. It only works if you don't need default gateway and broadcast (v6 has no broadcast). Is there any other purpose than network testing?
Can you please share knowledge about scope of network? Is really network job worth ?