Dude, I just put down a deposit on my first plasma table. I dream of the day I can afford and need one of these machines. Soo bad ass! Its awesome to see, only a couple years ago when you bought your homestead, to now your killing it loving your best life. Good for you brother!! Bravo sir!👏🏻
Showing of laser machine from different angle to show the overall performance n than leaving evaluation for viewers, in my opinion is mind blowing thanks sir for this amazing ways.
Haha well I dont know about that.. but I am staying busy with plenty to do, and getting a chance to travel around and help customers grow their business with these machines... thats a good thing!
I can't imagine troubleshooting machines like that, but boy there's nothing like em when they're cooking! Did the old barn meet it's end? looks like you've got a whole bunch of changes happening there! Thanks for sharing
lol, yea they are pretty cool, but man they are kind of a novelty to be honest.. Sheet cutting is way more profitable so most of the guys that get combo machines eventually stop usign them because the sheet cutting is in high demand and alot more profitable
@@maloyaircraft1174 the combo machines start at $100k and the standalone tube machines start at $76k. If that doesn’t scare you off, email me gary@ramseycustoms.com
I have been doing 1-2 installs per month for the last couple years, and even with all that, I still love setting it up and watching it, filming it. If you have never seen it in person, the videos dont really do it justice.
@@turbocobra I am hoping to try it on my machine one day once I know my settings are dialed in the best I can get them. I have learned a ton from all your videos and FB group.
Hi Ramsey I have raycus 1000w in cnc fiberlaser I have questions nitrogen gas can cut mild steel and carbon steel or no just need oxygen to cutting mild steel and carbon steel... I know nitrogen is expensive than oxygen but just I'm asking you this question if it can cut mild steel and carbon steel or just using nitrogen for stainless steel and aluminum and copper Also my other question for purity of oxygen if purity of oxygen just 93% and 7% other gas can cutting mild steel and carbon steel or no
thanks for watching! cant share the pierce settings, that, and a few other things are special things I do for customers that purchase from me, and if i share it with everyone, it devalues the service i offer. but just a tip... its not hard at all to setup .
Damn - I have no use for a monster CNC laser, it’d take up most of my basement, it’d probably cost a few $K just to hire a rigger to wrangle it through the yard and down there for me, and no way I’d ever convince the wife, but … I want one! 😆 (And wow, those tiny, fine gratings were pretty mind-blowing, I had no idea a machine of this size and lower could do such fine work!)
@@andrei14c ok, I’d love to help you. I will guide you on the purchase, and come spend a couple weeks training you and install it for you. $25,000 USD is the fee i Would charge. You can probably find a dealer closer to you that would do it cheaper
Well thats still a good tollerance depending on whats being fabricated. If yoru fabricating skyscrapers, 1/16th is awesome. if yoru making small aerospace parts, its got to be .001" or less.
I feel like I learn something new everytime I watch one of your videos. Gonna have to try the pre piercing and that technique to break up a long slot. I've been using micro joints but that would work better in my opinion.
slug destruct and microjoints are helpful. slug destruct if over used will have a significant impact on your cycle times, and drive up your N2 bill lol. But its handy to be able to use all the features when you need them
Not exactly. What I was referring to is the displaced metal dust, that is loose but sticks to it like a magnet. Dross is a plasma table term, you won’t hear that used in the laser world. It’s either burr free, or has a burr. I never mentioned slag
Yep, you are very wise to be such a young man! In fairness the last one was brand new and after researching it there is a bug and a new software update for it. Guess what the bug is? Drone flys away on its own! That’s what happened. First one I was flying to low over the Colorado river and let it go swimming 😂
If you cut sheet metal a lot, I think maybe you're more interested in it ruclips.net/video/189zqXtJFlk/видео.html ruclips.net/video/bP4tRf67yjY/видео.html
Love seeing these amazing machines do their thing!
Oh yea! they are cool for sure
You are creative, I follow you from Libya
Dude, I just put down a deposit on my first plasma table. I dream of the day I can afford and need one of these machines. Soo bad ass! Its awesome to see, only a couple years ago when you bought your homestead, to now your killing it loving your best life. Good for you brother!! Bravo sir!👏🏻
It's great to see a company be successful and good to see you successful also, Gary! Keep up the great work!
Thanks Reid, good to see you
Showing of laser machine from different angle to show the overall performance n than leaving evaluation for viewers, in my opinion is mind blowing thanks sir for this amazing ways.
Thanks. I agree with you ...
Amazing ! Love your sense of humor on the sleeping arraignments.
Those machines are absolutely amazing 🤩
Yea they are sweet for sure !
Schism! Love it!
Damn Gary, you are knocking it out of the park. It’s good to see it.
Haha well I dont know about that.. but I am staying busy with plenty to do, and getting a chance to travel around and help customers grow their business with these machines... thats a good thing!
good
Perfect choice of music for this. Band name says it all. Well done sir.
Whats the power soucre of OR-FM lasers are in majority of orders? 3kW or 6kW?
I can't imagine troubleshooting machines like that, but boy there's nothing like em when they're cooking! Did the old barn meet it's end? looks like you've got a whole bunch of changes happening there! Thanks for sharing
Always enjoy the videos! Wish we could see more of the tube cutters!
lol, yea they are pretty cool, but man they are kind of a novelty to be honest.. Sheet cutting is way more profitable so most of the guys that get combo machines eventually stop usign them because the sheet cutting is in high demand and alot more profitable
@@turbocobra having the capability is helpful in aerospace for complex coped joints. How could I reach out to you about pricing?
@@maloyaircraft1174 the combo machines start at $100k and the standalone tube machines start at $76k. If that doesn’t scare you off, email me gary@ramseycustoms.com
Man, another killer operation powered by Ramsey Customs!
I never get tired of seeing that flycut🤩
I have been doing 1-2 installs per month for the last couple years, and even with all that, I still love setting it up and watching it, filming it. If you have never seen it in person, the videos dont really do it justice.
@@turbocobra I am hoping to try it on my machine one day once I know my settings are dialed in the best I can get them. I have learned a ton from all your videos and FB group.
I was sitting in my shop watching this video, trying to figure how my Tool playlist suddenly overtook bluetooth lol
I'm not even in this industry, but after binging your videos I want to buy equipment from you!
How can I make money off one of these? They seem very interesting to have.
How does the weld penetration compare to mig welding? Have you tried doing sanitary welding with it?
Hi Ramsey
I have raycus 1000w in cnc fiberlaser I have questions
nitrogen gas can cut mild steel and carbon steel or no just need oxygen to cutting mild steel and carbon steel... I know nitrogen is expensive than oxygen but just I'm asking you this question if it can cut mild steel and carbon steel or just using nitrogen for stainless steel and aluminum and copper
Also my other question for purity of oxygen if purity of oxygen just 93% and 7% other gas can cutting mild steel and carbon steel or no
Lovely detailed video. Liked the 1/4 inch pierce with oxygen. Never tried this pierce style. Would you share the settings? I too have a 3000W
thanks for watching! cant share the pierce settings, that, and a few other things are special things I do for customers that purchase from me, and if i share it with everyone, it devalues the service i offer. but just a tip... its not hard at all to setup .
@@turbocobra Well taken and i appreciate the service you provide your customers. Thanks
Dude great music choice!!
Lol, glad you approve.
You always buyinh Oree Laser...is it economical or industrial use?
no I have my own brand now
Damn - I have no use for a monster CNC laser, it’d take up most of my basement, it’d probably cost a few $K just to hire a rigger to wrangle it through the yard and down there for me, and no way I’d ever convince the wife, but … I want one! 😆
(And wow, those tiny, fine gratings were pretty mind-blowing, I had no idea a machine of this size and lower could do such fine work!)
Very nice work! Do you sell to Europe as well?
Where in Europe? I could help you import one and come and install it for you
@@turbocobra In Romania.
@@andrei14c ok, I’d love to help you. I will guide you on the purchase, and come spend a couple weeks training you and install it for you. $25,000 USD is the fee i Would charge. You can probably find a dealer closer to you that would do it cheaper
@@turbocobra thank you for your offer an answer! We already have 2, one for pipes and one for metal sheets. What about training?
Hello, I am in Mexico so I will import directly. Are you willing to give training? (Of course in exchange of a payment)
i have training videos for sale on my website, but do not offer any training beyond that. I no longer sell OREE machines, but my own brand.
When I served my apprenticeship in the 1960,s + or - 1/16 of an inch on a fabrication was good.
Well thats still a good tollerance depending on whats being fabricated. If yoru fabricating skyscrapers, 1/16th is awesome. if yoru making small aerospace parts, its got to be .001" or less.
@@turbocobra I used to make Challenger 2 battle tanks.
at 20:35+, is that a Viper chair?
Cool stuff Gary.
thank you sir for watching.
Your equipment sells itself.
thank you sir
Nice video . Another good company helped out by Gary Ramsey. Robin is saving up for that 12 kilowatt .
and just think... it all got started 18 months ago when I installed the very first laser in your shop!
Great video!
What is the best software to drawings simpliest things, like in the video?
In the video it showed Fusion360, which is 3D parametric modeling softrware, not simple or easy. For basic 2D drawing I really like Vectric Cut2D.
@@turbocobra
Thanks for your answear🙏🏽
Need those pierce settings for 1/4”
oh yea? lol
20:55 " Ow! You're fired ! "
exactly!
what made you switch from prima to oree?
A few reasons, but both are good machines. I am about to switch to my own branded machine with some very cool/unique features.
Hey he got the American laser.
Fan instead of fenji😂
lol, I forgot about Fenji. I think yours is the only with that special designation!
@@turbocobra Well I’ll be dang I’m just special that way lol
I feel like I learn something new everytime I watch one of your videos. Gonna have to try the pre piercing and that technique to break up a long slot. I've been using micro joints but that would work better in my opinion.
slug destruct and microjoints are helpful. slug destruct if over used will have a significant impact on your cycle times, and drive up your N2 bill lol. But its handy to be able to use all the features when you need them
@@turbocobra absolutely agree, I could see me using the slug destruct only on certain drops of a part just like I use micro joints.
That "stuff stickin to it" is called dross. Slag is from welding Dross is from cutting.
Not exactly. What I was referring to is the displaced metal dust, that is loose but sticks to it like a magnet. Dross is a plasma table term, you won’t hear that used in the laser world. It’s either burr free, or has a burr. I never mentioned slag
Old friend, you might need to stick with the laser business and leave the drone stuff to someone else :)
Yep, you are very wise to be such a young man! In fairness the last one was brand new and after researching it there is a bug and a new software update for it. Guess what the bug is? Drone flys away on its own! That’s what happened. First one I was flying to low over the Colorado river and let it go swimming 😂
Price?
Price for what ?
Laser
wow!! thank U!!
I m intrastad price?
i mostly only sell to the US and other english speaking countries
If you cut sheet metal a lot, I think maybe you're more interested in it ruclips.net/video/189zqXtJFlk/видео.html ruclips.net/video/bP4tRf67yjY/видео.html
Nice laser
You are ding good that new nothing about manufacturing until 2018