Yes if your controller doesn’t have a record out, you should use the booth output and put you speakers on the master output .... with the booth connected to the irig then you can have a dedicated control volume for the audio going out to record .... just an idea good job though ....
Kudos to your help, as I've been getting frustrated with watching how other DJs hook up for live streaming, you just saved me a whole lot of money, Im using a Traktor Kontrol S8 and am running my speaker cables through to my Booth outputs. I have the master being routed to my Irig2 as you showed in your video. Of all the other methods I tried before I was getting interference from my speakers. But this one works fantastic. I also have the apple adapter where I never lose a charge on my iPhone. Once again thanks, I will subscribe to your channel. Jay Richards
Hello,I made the stereo test on a live video Facebook and if we enter a stereo jack in the irig there is only one channel that passes, so we hear from the speakers only one channel. It is impossible to have the stereo effect but it is important to have the sound of 2 channels if you did not want to lose parts of music. The easiest is switch on the mono position if your get it on your mixer. Or used a cable that brings the two channels to a mono jack. Or bridged yourself a mono jack on a stereo cable (R & L together).
I have the pioneer DDJ controller which only has 1 output - which is currently plugged into my boombox/speakers. If I plug the audio output into the irig can I use the mic output on the irig to connect to the boombox speakers??
Hi, an oldskool junglist here..... can you use irig from an analogue mixer + two vinyl decks going through to a phone.... I done the whole digital controller + trss to phone successfully on FB but getting bored of that and want to mix the natural way now 😀👊🏻
i know its coming out from your controller stereo you used RCA... but the irig its self its only mono?. (1 stripe on the 1/4 inch plug). are you sure you are not loosing some of the sound, did you try the left and right. just wondering im planning to buy one too..
Im puzzled on this because its mono in... but stereo out through the headphones and also the TRRS cable. He used a stereo adapter... but its going into a mono input.
Excellent vid. I have a similar set up to yours . Did you get it from the Dj finance website? Awsome bit of kit. I have just ordered the irig 2 for streaming on Restream onto Facebook. Only difference is i am going to run it from my booth output. All the best buddy 👍
Booth is for the DJ monitor not line out, you use main out/record out to go to the irig just as he has it in the video. The idea is that you can then set the booth speaker level which does not interfere with the recording levels. RTFM. :)
You can do... There's nothing saying you should do and this is completely not what Booth output is intended for. Often a dedicated record output will sound better than the booth. If you have your gain set appropriately you shouldn't need to regulate anything else.
thanks for your video. very clear and complete. if you put a little pace in it and focus on your volume and overall sound quality, I'll watch your next unboxing too. Your explaining was very patient and good.
Hi there, I have my master outs (XDJ RX2) going to my speakers, can the booth outputs be used instead? And I’ve got the iPhone XS Max with the lightning connector...any special plugs for that?
I did almost the same exact thing so make DVS setup with VDJ, head phone jack cord that split to rca then 2 rca splitters...one on each side rca channel and there ya go now that you have four you plug them into each channel on the mixer accordingly and there you go..... obviously you need control records but I use Serato with no issue and it even allowed my mixer which was totally analog 2 interact with the program like when you moved the crossfader EQ knob it moved on to program but no USB input it all
Anyone know how if I can use one of these on a ddj 400 ad also use my rokit 5s at the same time if that makes sense, im a new starter so not to clued up
What Rig2 setting, you use fx/thru not clear in the video. Also do I need an app to support this as I'm on android. So far I tested and its not working. Thank you!
Ok here goes my question i'm trying to stream live DJ on Facebook i 'd like to use the IRIG IK Multimedia GUITAR midi Interface for better audio it seems to be the same as the newer IRIG 2 but is less expensive connects the same way i'd like to use it if possible and the other question i have is this if i connect my iphone mic and headphones to this will i be able to respond to people commenting on Facebook or do i have to got through the microphone setup on my mixer / controller? Please advise thanks also
Question??? Does it only work when u do live streaming or can u also use it when your just making a video that u want to upload later as far as not hearing any background noises or the clicking of the fader !!!
MAGIC DICE MUZIC SOUND SYSTEMS HI I’m not too sure. I’ve never used it to record a mix. I’m a Serato user which gives me the option to record my set with there software:)
@@djdazr2008 ok I'm a serato user as well and all I'm trying to do is record a video of me playing without the background sounds so I can upload it later !!!
@@magicdicemuzicsoundsystems5441 You may have already figured this out already but put a ‘3mm Jack TS Mono to 3.5mm TRS Mini Stereo Jack Interconnect Cable (Mono to Stereo)’ into the socket that has the guitar logo on the irig 2. Then put the other end of the lead into the aux socket on amp/stereo. Then on the irig 2 make sure the switch is set to ‘thru’ then you will hear the output while you mix.
I have irig2 plugged into my phone and it is still using phone mic and not going directly from my DJ controller. I have TSR to 1/4 but it comes from booth. Not working 😞
Now I have a basic party mix numark mixer .. that has only standard left & right, but has no booth output, how ever that set up was easy to follow, you forget to mention that with most iPhone users, need C4 cable which connects to the lighting headphone set ..yet to test So luckily I have Vmx 1000 be ringer, 5 line 4 channels mixer which has booth output Update.. I tried several times.. but maybe it’s not working? I had connect a wireless headset mic to test & that works Mmm, maybe I’m doing something wrong?
Hey guys, does anyone know how to convert the mono amp output at the top so it plays out of 2 speakers? I want to listen to what i’m mixing while I DJ but it only comes out of 1 speaker. Thank you! (Not using a mixer btw)
Hello sir? I have irig 2, i try alot of connection, but i dont have any output in my phone live, when i mixing my controller, but when i try to lestin to the irig headphone theres an output.
I bought the new irig Stream, as it is a proper stereo streaming interface. The irig 2 is great, but as you said, it is really meant to be used with guitars.
DJ Kerfuffle the Irig stream the go hey ? Is it 3.5mm imput or 1/4 inch and do u run out of your booth or master.. I’m thinking of running out of second master which is RCAs into a 3.5mm splitter.. Using a S9 mixer and most sound at home comes from Booth speakers as the monitors are plugged into main
@@mattytattis9416 The irig Stream uses 2 standard RCA/phono input sockets, which I feed from the stereo record outputs of my mixer. It also has a 3.5mm headset input on the side which lets me connect a gaming headphones with a built in mic.
Just what i needed.. its 2018 now im thinking about buying this.. how did you get on with this.. i would like to video record my dj mixed using my phone.. so you say the bass sounded normal if this is still correct i think i will buy
How i can get video from. GoPro. And sound from decks. Without streaming by phone. I want to get video by camera GoPro to PC. And sound from decks to PC. And both stream on fb for example
this guy may not be around now, he forgot to tell us what do you do inside the iphone to catch the sound coming out of the controller or mixing board. i connect everything accordingly the phone doesn't do anything. the phone doesn't open any software or program to catch the sound. i did plugged it in out my Numark scratch booth output. that way i can control how much sound i can send through. unfortunately, the phone is not receiving any signals. Anyone, please?
Hello, there should be other identical master output ; booth monitor or Rec. if there is only one output you can connect an amplifier to the irig (thru function). on the other hand, I do not understand how a stereo jack line output can plug into a mono mic jack input ???? The digital ways are impenetrable ;-)
Видеоклипы
Yes if your controller doesn’t have a record out, you should use the booth output and put you speakers on the master output .... with the booth connected to the irig then you can have a dedicated control volume for the audio going out to record .... just an idea good job though ....
Thank you. Your tutorial was great. Easy to understand , right to the point. Appreciate you.
Kudos to your help, as I've been getting frustrated with watching how other DJs hook up for live streaming, you just saved me a whole lot of money, Im using a Traktor Kontrol S8 and am running my speaker cables through to my Booth outputs. I have the master being routed to my Irig2 as you showed in your video. Of all the other methods I tried before I was getting interference from my speakers. But this one works fantastic. I also have the apple adapter where I never lose a charge on my iPhone. Once again thanks, I will subscribe to your channel. Jay Richards
All the GarageBand people know a lot about IRig2 🤘🏼
I've purchased an irig two and couldnt figure it out....thanks man
Hello,I made the stereo test on a live video Facebook and if we enter a stereo jack in
the irig there is only one channel that passes, so we hear from the speakers only one channel.
It is impossible to have the stereo effect but it is important to have the sound of 2 channels if you did not want to lose parts of music.
The easiest is switch on the mono position if your get it on your mixer.
Or used a cable that brings the two channels to a mono jack.
Or bridged yourself a mono jack on a stereo cable (R & L together).
Thanks for the setup instructs! 💯
Sick vid mate
I have the pioneer DDJ controller which only has 1 output - which is currently plugged into my boombox/speakers. If I plug the audio output into the irig can I use the mic output on the irig to connect to the boombox speakers??
I'm using an Edison professional scratch 3000mk2 and I'm still getting no sound from the booth plugins
Did you have to download any software for it mate
Brilliant
Just about to start going live with my djing to try pull in new customers.
you were very helpful BUT your voice is too LOW cant hear you very very very LOW, But thanks im a dj chicago guy on you tube mixing LIve House Music.
Hi, an oldskool junglist here..... can you use irig from an analogue mixer + two vinyl decks going through to a phone.... I done the whole digital controller + trss to phone successfully on FB but getting bored of that and want to mix the natural way now 😀👊🏻
What’s about Qtr inch that has a chord str8 to the master output. With no adapter. Qtr inch to male ? Should sound lil better ??
i know its coming out from your controller stereo you used RCA... but the irig its self its only mono?. (1 stripe on the 1/4 inch plug). are you sure you are not loosing some of the sound, did you try the left and right. just wondering im planning to buy one too..
Im puzzled on this because its mono in... but stereo out through the headphones and also the TRRS cable.
He used a stereo adapter... but its going into a mono input.
Hi, do I need to download an app to use it?
Excellent vid. I have a similar set up to yours . Did you get it from the Dj finance website? Awsome bit of kit. I have just ordered the irig 2 for streaming on Restream onto Facebook. Only difference is i am going to run it from my booth output. All the best buddy 👍
you should take the audio out of your BOOTH output.....means you can regulate your volume better.......just saying
Booth is for the DJ monitor not line out, you use main out/record out to go to the irig just as he has it in the video. The idea is that you can then set the booth speaker level which does not interfere with the recording levels. RTFM. :)
You can do... There's nothing saying you should do and this is completely not what Booth output is intended for. Often a dedicated record output will sound better than the booth. If you have your gain set appropriately you shouldn't need to regulate anything else.
Can you use this just to record from mixer vinyl decks record out to the phone ???.....
That's what I'm gonna do!
thanks for your video. very clear and complete.
if you put a little pace in it and focus on your volume and overall sound quality, I'll watch your next unboxing too. Your explaining was very patient and good.
My I rig 2 is not working. No audio is coming out when I go live. Can someone help me with my problem?
Hi there, I have my master outs (XDJ RX2) going to my speakers, can the booth outputs be used instead? And I’ve got the iPhone XS Max with the lightning connector...any special plugs for that?
Tanks for video . Two questions .. can i use my samsung s8 phone ,i mean it will works property and ,facebook allowed us to play any song ?
Thanks for video
I did almost the same exact thing so make DVS setup with VDJ, head phone jack cord that split to rca then 2 rca splitters...one on each side rca channel and there ya go now that you have four you plug them into each channel on the mixer accordingly and there you go..... obviously you need control records but I use Serato with no issue and it even allowed my mixer which was totally analog 2 interact with the program like when you moved the crossfader EQ knob it moved on to program but no USB input it all
Anyone know how if I can use one of these on a ddj 400 ad also use my rokit 5s at the same time if that makes sense, im a new starter so not to clued up
didn’t figure it out? can’t find the solution anywhere
What Rig2 setting, you use fx/thru not clear in the video. Also do I need an app to support this as I'm on android. So far I tested and its not working. Thank you!
Any chance you managed to sort it? Having the same problem
Ok here goes my question i'm trying to stream live DJ on Facebook i 'd like to use the IRIG IK Multimedia GUITAR midi Interface for better audio it seems to be the same as the newer IRIG 2 but is less expensive connects the same way i'd like to use it if possible and the other question i have is this if i connect my iphone mic and headphones to this will i be able to respond to people commenting on Facebook or do i have to got through the microphone setup on my mixer / controller? Please advise thanks also
Question??? Does it only work when u do live streaming or can u also use it when your just making a video that u want to upload later as far as not hearing any background noises or the clicking of the fader !!!
MAGIC DICE MUZIC SOUND SYSTEMS HI I’m not too sure. I’ve never used it to record a mix. I’m a Serato user which gives me the option to record my set with there software:)
@@djdazr2008 ok I'm a serato user as well and all I'm trying to do is record a video of me playing without the background sounds so I can upload it later !!!
Ah I see what you mean. I’ve never tried it but I’m sure it would work the same way while recording video instead of live steaming
@@djdazr2008 actually no it does not work when recording video and I have it hooked exactly the same way u do !!!
@@magicdicemuzicsoundsystems5441 You may have already figured this out already but put a ‘3mm Jack TS Mono to 3.5mm TRS Mini Stereo Jack Interconnect Cable (Mono to Stereo)’ into the socket that has the guitar logo on the irig 2. Then put the other end of the lead into the aux socket on amp/stereo. Then on the irig 2 make sure the switch is set to ‘thru’ then you will hear the output while you mix.
Is it the same principle when using a laptop rather than a phone?. You still need one of these in the same way? . Ta
Just ordered one
I have irig2 plugged into my phone and it is still using phone mic and not going directly from my DJ controller. I have TSR to 1/4 but it comes from booth. Not working 😞
Same problem. My phone still records the sound like normal. Have you fixed it by now?
Will an Rig 1 work.
How do yo call the small gold PL you plugged into the iRig 2 ( that convert from 3.5mm to PL ) so it will b easy to find it in the internet
DJ headphone jack
Now I have a basic party mix numark mixer .. that has only standard left & right, but has no booth output, how ever that set up was easy to follow, you forget to mention that with most iPhone users, need C4 cable which connects to the lighting headphone set ..yet to test
So luckily I have Vmx 1000 be ringer, 5 line 4 channels mixer which has booth output
Update.. I tried several times.. but maybe it’s not working? I had connect a wireless headset mic to test & that works
Mmm, maybe I’m doing something wrong?
Do you get mono sound ?
Hey there. Just brought the Irig2 to record my dj sets. What software are you using too record your sets. Many Thanks
sam serato dj
daz ranger Could I ask you a question mean
Can anyone help me? I have everything I need as shown and can’t get my IRig 2 to work for my 1000s
What is the link to that desk top cabinet you got, I need one that slides like that???
Hey guys, does anyone know how to convert the mono amp output at the top so it plays out of 2 speakers? I want to listen to what i’m mixing while I DJ but it only comes out of 1 speaker. Thank you! (Not using a mixer btw)
Does anyone know how I connect this to the Ddj 400?
same way he did it, use the only output the ddj 400 has for an rca cable and connect through that
Peter Mccomb I tried, but I couldn’t hear the music through my speakers in my room
change speed to 1.5x lol
Hello sir? I have irig 2, i try alot of connection, but i dont have any output in my phone live, when i mixing my controller, but when i try to lestin to the irig headphone theres an output.
Is theres any suggestion?
I followed these EXACT steps with a samsung S8 plus and did not work whatsoever. WHY ??????????
I bought the new irig Stream, as it is a proper stereo streaming interface. The irig 2 is great, but as you said, it is really meant to be used with guitars.
DJ Kerfuffle the Irig stream the go hey ?
Is it 3.5mm imput or 1/4 inch and do u run out of your booth or master..
I’m thinking of running out of second master which is RCAs into a 3.5mm splitter..
Using a S9 mixer and most sound at home comes from Booth speakers as the monitors are plugged into main
@@mattytattis9416 The irig Stream uses 2 standard RCA/phono input sockets, which I feed from the stereo record outputs of my mixer. It also has a 3.5mm headset input on the side which lets me connect a gaming headphones with a built in mic.
Just what i needed.. its 2018 now im thinking about buying this.. how did you get on with this.. i would like to video record my dj mixed using my phone.. so you say the bass sounded normal if this is still correct i think i will buy
Jus Badd yes bass still sounds fine. I’ve done a few Facebook love videos and had no problems. Thanks
daz ranger ok thanks.. i just ordered this managed to get it for £11 off someone selling of facebook market place
@@djdazr2008 he is asking if the bass sounds good ab.ot about your LOVE videos.......hahahahhaa informative video though....do you get sterio sound ?
Im having bass issues :O does anyone know what the problem with that?
How i can get video from. GoPro. And sound from decks. Without streaming by phone. I want to get video by camera GoPro to PC. And sound from decks to PC. And both stream on fb for example
Elgato cam link look it up ;)
@@gal3sz thank you
OBS ;)
Is there an iRig product with stereo output for an Android smartphone ?
Yes
Why not plug directly into the phone?? What is the advantage?
John Bergman it doesn’t work just plugging direct into the phone. The irig fools the phone into becoming an amp
this guy may not be around now, he forgot to tell us what do you do inside the iphone to catch the sound coming out of the controller or mixing board. i connect everything accordingly the phone doesn't do anything. the phone doesn't open any software or program to catch the sound. i did plugged it in out my Numark scratch booth output. that way i can control how much sound i can send through. unfortunately, the phone is not receiving any signals. Anyone, please?
Did you manage to sort it? Having the same problem
@@MackzUK did you ever figure it out? I’m using the irig stream, same problems tho
So i have the irig 2 bt i wanna go live and have good audio but its not working static and noises and and how tos anyone ? Lol i plugged it my booth
Help please my speaker are connected to my master so how can I put the irig to my master
Nic Flava 'Artist' Hoskins I have my speakers connected to the booth output not the master
Hello, there should be other identical master output ; booth monitor or Rec.
if there is only one output you can connect an amplifier to the irig (thru function).
on the other hand, I do not understand how a stereo jack line output can plug into a mono mic jack input ????
The digital ways are impenetrable ;-)
Thank you
Skip 4 minuts
If anybody need some help to do the connection i can help im here 🙌🏼
i need help mines just not working man
I got static sound on my dj set on Facebook when I do livestream. I am using iRig2 too . Where is the problem? Thanks