@@diegogalan2726 I tried this with a glove that was pretty far gone and it definitely helped! It was pretty pancaked and now it has some form. The leather is still really soft but after reforming it and working the 2nd hinge, it’s pretty well improved.
I just dipped my a2000 d33 that I wasn’t a fan of the hinge break in I did at first. Watched that first short and the Japanese glove one and decided why not. Should be dry by Saturday so we will see how much better of a job I did. Thanks for the push and keep it up.
Update. So it was dry today and I worked it and conditioned it and it’s much more broken in than before. The hinge isn’t like in the vids but I think that’s a combination of my hand isn’t big enough and the d33 just doesn’t close like I’m expecting it to as I usually wear outfield gloves. The hinge is right after the n on the palm but when I close I also notice a bend right on the s as well. Overall though I give the man his props cuz this worked out well.
Ahh the good old hot water method done this 100s of times the laces inside the glove that do t get conditioner can be brittle so might have to replace sooner than normal
That glove looks broken in similarly to my hinges. I put my full hand in with two fingers in the pinky hole, sliding the rest of my fingers down 1 hole. I always break in my gloves with a ball in. I dont like lending my glove to others to use as it comes back to me warped. My hand seems to be a bit different than most. I'm not sure there is one correct way for the creases. It really depends on player preference and performance. I have a 15" Wilson A1695.
Hey brother, just a quick question! If I have applied to much conditioner to my glove over the year and my glove has become super heavy, are there any steps to making my glove lighter? Hope you can answer this for me, if not no worries! Have a good one man.
Even with the room temperature water for the break ins will it ruin the color. Ik you said hot water treatment will ruin the color but I have a aria glove coming in soon so I dont want it ruin the color in the temperature water break in
I have an outfielders golve that hase the same form as that golve but worse so ill try this. Ive tryed fixing it before but never could get it to work.
i have my late grandfathers old baseball glove that’s still in good condition considering how old it is. Could you possibly restore it? i would love to be able to play with it in a game
Honestly I would have dicks start the break in method, then you go out and play with someone who throws hard. As your using it keep playing with it bending it into the shape you want, I hate that flared thumb and pinky, so I don’t know if you gotta do this to get that stupid flare. My daughter got a catchers glove, I had Dicks do their thing to it, then we dropped it off to here hitting center and had one of the pitching trainers using for a week, it perfect now
How do I send you my glove please? It has like the worst fold I want it flared thumb, flared pinky, rolled fingers, and I wear my gloves traditional. Edit: please make this to Top comments so he sees this. I want to fix my glove.
@@Hi-zx1modon’t waste ur time this person OBVIOUSLY never played baseball before!! Idky people LOVE trying to correct people when they have NO idea what the are talking about!!!
Here it is! Thanks for the video. I’m going to give it a try
So did it work
@@diegogalan2726 I tried this with a glove that was pretty far gone and it definitely helped! It was pretty pancaked and now it has some form. The leather is still really soft but after reforming it and working the 2nd hinge, it’s pretty well improved.
@@diegogalan2726Jesus loves everyone
@@AZboneJesus died for us
@@JesusFollower2311 yup
Dude, I’ve been bingeing your videos for a couple of days now. So satisfying watching these break-ins. Love it, cheers from NC.
Jesus loves everyone
That is actually a beautiful glove
I just dipped my a2000 d33 that I wasn’t a fan of the hinge break in I did at first. Watched that first short and the Japanese glove one and decided why not. Should be dry by Saturday so we will see how much better of a job I did. Thanks for the push and keep it up.
Update. So it was dry today and I worked it and conditioned it and it’s much more broken in than before. The hinge isn’t like in the vids but I think that’s a combination of my hand isn’t big enough and the d33 just doesn’t close like I’m expecting it to as I usually wear outfield gloves. The hinge is right after the n on the palm but when I close I also notice a bend right on the s as well. Overall though I give the man his props cuz this worked out well.
Ight thanks for the update
You are quite literally a baseball godsend this is crazy
lol 😂
Bros devious for going traditional finger in
Wish I had this help when I played
The best way to break in a glove is to play catch with someone who throws hard, side not I hate that flared fingers crap
Flared fingers is just factually better 🤷♂️ but if you don’t like how it feels it’s not worth it
I tried it and so far it is going good
Ahh the good old hot water method done this 100s of times the laces inside the glove that do t get conditioner can be brittle so might have to replace sooner than normal
Can u do a javy Baez glove video 🙏🏽
Hello, Glove King how long do the break-in take?
It takes about one week in my hands before I send it back out to you!
@@ballglovekingdo you have any promo codes for your website? #ballgloveking
@@ballgloveking Great! I'll look into it!
That glove looks broken in similarly to my hinges. I put my full hand in with two fingers in the pinky hole, sliding the rest of my fingers down 1 hole. I always break in my gloves with a ball in. I dont like lending my glove to others to use as it comes back to me warped. My hand seems to be a bit different than most. I'm not sure there is one correct way for the creases. It really depends on player preference and performance. I have a 15" Wilson A1695.
Hey Chris I was just wondering do you take orders outside of north America
How much for the break in and where do I order thank you!
How much is the break in?
Hey brother, just a quick question! If I have applied to much conditioner to my glove over the year and my glove has become super heavy, are there any steps to making my glove lighter? Hope you can answer this for me, if not no worries! Have a good one man.
I’d figure you can soak it and let some of the conditioner come out
would this work with catcher gloves? what temperature water?
Bro how do we send it to him
How do I order a glove break-in because I need one for my Wilson A2000
Go to ballgloveking.com and click on services
@@ballgloveking thx
Hi I’m a new sub pls do softball glove
You should do a glove break in on the ken griffey jr hoh the same way he did
Could you do a 44 pro glove first base move left hand throw
I have done them before so 110% yes
How would you break in an A2000 differently for younger youth (10 or 11 year old)? Any tips?
Ball glove king how do you get you glove to be not heavy after you soak it in water?
What temperature do you put the water
My glove is still kinda heavy and idk if I ruined it, how long did it take for yours to dry?
It’ll dry a lot in the first 48 hours and it will dry 100% after a couple more days. Don’t worry my man, it’s all good!
@@ballgloveking ok thanks! Love your vids!
Is it ok to dip colorful gloves like that in room temp water and the dye won’t run?
Even with the room temperature water for the break ins will it ruin the color. Ik you said hot water treatment will ruin the color but I have a aria glove coming in soon so I dont want it ruin the color in the temperature water break in
I’ve been using it for a while now and I’ve seen no change in color. But I’ll be on the look out!
@@ballgloveking alright thanks
How do you dry off the glove once it is wet?
I have a similar glove. 11.25 HOTH trapeeze. Might give it a go but I feel like the glove is a lost cause for reshaping.
Awesome
How much you charge?
My catchers glove is in a really bad position right now. Can you reform it, how much would that cost?
People will pay for any service. It sucks people are too lazy to do it themselves but am glad to see someone capitalizing off them too
lol confusing comment
What about if the glove has been broken in too much and is too loose how can I fix that
Hi glove king I was wondering how hot does the water have to be to do the hot water treatment on my a2000 thanks
He says to use room temperature water in his newest break in video
Thanks
Are you getting water marks on the gloves after they dry?
I’ve definitely gotten there before. Two things help. More time for one. It simply needs to dry more. And for two conditioner often makes them go away
@@ballgloveking thanks….what conditioner do you recommend?
How can we order
how much does a break in cost?
$100
It’s the best money can buy 🙌
Can u fix mine. My dad and I messed it up so bad.LOL 😂😂
How much for a softball glove 12.5 inches ? Shipped back to Maine
$100 on ballgloveking.com
How much is it to get a break in
How much does it cost
Bro we need to call the cops he has a bunch of hostages hanging from his ceiling
What is the website
Where can I order break ins
Hey, I am thinking about doing this with my 44 pro will the water make the glove extra heavy or no?
I have an outfielders golve that hase the same form as that golve but worse so ill try this. Ive tryed fixing it before but never could get it to work.
i have my late grandfathers old baseball glove that’s still in good condition considering how old it is. Could you possibly restore it? i would love to be able to play with it in a game
What is the best way to break in a new glove
Honestly I would have dicks start the break in method, then you go out and play with someone who throws hard. As your using it keep playing with it bending it into the shape you want, I hate that flared thumb and pinky, so I don’t know if you gotta do this to get that stupid flare. My daughter got a catchers glove, I had Dicks do their thing to it, then we dropped it off to here hitting center and had one of the pitching trainers using for a week, it perfect now
How much would it cost?
$100 👌
@@ballgloveking how can I send it out to you? I’m thinking about getting an a2000 would that be a good glove?
How do you send it to you
Not a baseball guy, but is there a reason for the extra finger?
thats a type of web called trapeze there is actually no room for your finger in it
@@robinsonladeaux1036 good to know
hot or cold water?
Wilson a2k Ozzie albies edition or ssk z9? I can't decide
A2K Ozzie all day
It’s a far better glove I promise
Where do I send my glove to get broken in
Do you do kids gloves? I’m 11 but my glove seems an off when I squeeze. I wish my glove was like yours
What about a catchers mit
Do you sell gloves as well as bring them in?
Also, do you have a recommended company for first base glove?
I’ve always wanted a Rawlings heart of the hide, but if there’s better….
How expensive does it take for you yo break in a glove?
its on his website but $100
Don’t ever flare the pinky the ball will fall out every time you get the ball
incorrect
It’s a heart of the hide
Is that cold or hot water
ball glove king i have a a 2000 in 14u travel ball at 3 base how should i break in my glove
Holy sweet mother, Theresa? What a weird thing to say.
how do i send a glove to you?
How do I send you my glove please? It has like the worst fold I want it flared thumb, flared pinky, rolled fingers, and I wear my gloves traditional.
Edit: please make this to Top comments so he sees this. I want to fix my glove.
go to ballgloveking.com and purchase a glove break in!
I just beat the hell out of it
🎉😊❤
I have one that's full pancake. Can you fix that? Lmao
Can you make mine so my gloves thumb can touch the pinky
Can you fix mine?
This could be a the best break in of all time but the scrub using it by putting his hand in traditionally aint gonna make plays
How much
You're supposed to do all that shit? I just threw some sand in it and punched it a few times lol
lol love it
Wild ppl pay to ship their glove to someone to break in for them and then sent back. No hate on the hustle but so easy to do yourself
Can I send mine it and u can fix it ?
Is it bad? I did it last week and I didn’t do it right is it bad if I do it again?
On my A2000 with super skin
I have that glove
My son has a nice first baseman glove that I’d love for you to help us break in. If you can help us with this please send me your contact info.
The glove looks so wierd
Im confused y did he bring up different glove when he said this glove looks sick?? Only talk about the glove in the video! Lmao!!!
he meant it looks bad. normally sick means a good thing, but he was using it to say it looked bad
@@williamdavis313 I know he wasn’t i was being sarcastic lol!! I was saying ik he isn’t talking about that glove because it looks horrible!!
If you dont have creases in your glove youre not playing ball 💯
Why are you wearing a bagging glove?
12 inches is too small for slowpitch. Doesnt matter how that glove gets broken in. If hes not perfect hes dropping that ball
Can you pls fix my pink A2000 for me
Who cares about creasing? It’s a baseball glove 😂 it’s supposed to be creased
If the creases are bad it closes around the ball wrong and feels like ass to catch with
U OBVIOUSLY never played baseball!! Its ok!! I understand!!! Let the grown ups talk!!
@@Hi-zx1modon’t waste ur time this person OBVIOUSLY never played baseball before!! Idky people LOVE trying to correct people when they have NO idea what the are talking about!!!
When did you get tatted??
I’m cooked😊
HEEYYYYYY IS THIS BASED ON MY COMMENTT????
Hello
Disregard my comment in that last video, I’m gonna try to fix my glove with this
That might be the grossest glove I’ve ever seen
That glove is sexy
Tf you smoking?
@jeffepley2351 weed bro I'm from Colorado wbu? That glove is fire
Y
T
Horrible advice
can i have a pin if i tricked you
... Read More
So bite the bullet and use water? Thanks.