I got mine today and the filament does not go through the nozzle. I wait the one minute while applying pressure but nothing happens. (Edit) I discovered the motor wasn't plugged in under the black cable retainer, it works wonderfully now
i need help BADLY. i've had the printer for several days; it has worked beautifully. BUT. before, when i pressed the print button for 3 seconds it raised the nozzle like it was supposed to. then when i' press and let go quickly, it would print. now it won't print. i press and let go quickly, and all it does is raise the nozzle like i held it. what's wrong and how do i fix it?
Mine stops once a build reaches .5cm tall. It has no issue moving on any axis so I don't know what to do to fix it. I have tried several codes and different sd cards.
@@Easythreed3D I went to your website and submitted a help request about 5 days ago, but haven't gotten an email back yet. What is the usual wait time?
Try looking at your mesh. There is software online to look at and repair the mesh of model. One question though, did it print the sample model that came on the mini SD card okay?
Hola necesito comprar la mejor easythreed entre la serie x y k, necesito gran calidad pero con el mismo formato, no importa que suba un par de dólares... cuál me recomiendas?
Hi. I have a question. How to fix the printing not align. From bottom to top print It become not align with the floor print and print bed always got off the print shape
I'm wondering this too, I was trying to change the filament halfway through realizing I didn't have enough for the current print, but can't seem to figure out how to feed the new color in. I've tried the original threading steps, I'm at a loss.
@@tyanifesac There is a g-code for pause. G-code is a programming language used by 3D printers to control the printing process. Pausing a print in G-code means temporarily stopping the printer from printing and then resuming it later. There are several ways to pause a print using G-code, such as using the M25 command to pause an SD print, the M226 command to initiate a G-code pause, or the M601 command to pause a print. The G04 command is another way to pause the printer for a certain amount of time, normally measured in seconds or milliseconds. This command is available on any 3D printer and can be added directly via the G-code or the slicer commands, depending on the model and slicer you’re running. Inserting that G-code pause is often as simple as inserting a G04 command, a G1 command, or an M1 command depending on the software and what you want from the pause.
My daughter got this for Christmas..please help..Im completely confused how to download images to the Tf card in the gcode format..I plugged the drive with the tf card into my laptop and opened it but I do not understand what Im looking at..I watched the video shows nothing on this process only operations. Is it because I have a chromebook? I downloaded the easyware from their unsecure site and it came through as a zip file??
@aplayz3024 I got it running. Basically, after u downloaded cura, u need to plug in the sd card given to your computer and go to file that says "manual,video,sofware>slicer sofware,video,manual>for mac/windowa(base on your os)>cura slicer>cura ser project of your printer>K7. Cluck it then it will bring u to cura and a little while layer it will ask I to open as project or import model, chose open as project then it should work
I got this printer yesterday and I have tried to print 30+ items but it keeps only printing one thing and I kept making new files in cuts and it keeps printing out this one thing what should I do
hi. please contact info@easythreed.com send us your gcode. i think your gcode has problem. and please know the printer print only gcode file. and the file name with english or numbers only.
can't feed and retract， check reason ruclips.net/video/pn63UDXZq9c/видео.html feed not good during printing， check reason ruclips.net/video/PZUhnDcqyJg/видео.html
i reallllllly want one but only they were in india i wishhhhh i always love watching this video then imagining i will get one but never do, this makes me sad
hi, i just bought the printer recently and i got an issue, the printer stops while is working and i dont know why. It only made the base and it stops and thats it, do you know how to fix this error?
The machine is awful it doesn’t work on my 3rd print it started glitching out and wouldn’t make anything and it would just randomly move around faster then regularly not doing anything
I got mine today and the filament does not go through the nozzle. I wait the one minute while applying pressure but nothing happens.
(Edit) I discovered the motor wasn't plugged in under the black cable retainer, it works wonderfully now
i need help BADLY. i've had the printer for several days; it has worked beautifully. BUT. before, when i pressed the print button for 3 seconds it raised the nozzle like it was supposed to. then when i' press and let go quickly, it would print. now it won't print. i press and let go quickly, and all it does is raise the nozzle like i held it. what's wrong and how do i fix it?
I just got mine I’m trying to fail it in using the tf card but I’m having issues getting it on the card
please contact info@easythreed.com for support.
Mine arrived today and it works amazing! Just asking, is there a way to turn off or just unplug power?
only unplug power.
@@Easythreed3D Thank you!
I would either put it on an extension bar with a switch on it or install a switch on the unit's power cord. Print a case for the switch first. 😎
Could you please tell me if it's possible to print via a USB cable, and if so, how?
Mine stops once a build reaches .5cm tall. It has no issue moving on any axis so I don't know what to do to fix it. I have tried several codes and different sd cards.
contact us info@easythreed.com
@@Easythreed3D I went to your website and submitted a help request about 5 days ago, but haven't gotten an email back yet. What is the usual wait time?
@@elijahsmith3524 hi, i got the same issue, how can i fix it?
Try looking at your mesh. There is software online to look at and repair the mesh of model. One question though, did it print the sample model that came on the mini SD card okay?
can this 3D Printer print another 3D Printer?
Hola necesito comprar la mejor easythreed entre la serie x y k, necesito gran calidad pero con el mismo formato, no importa que suba un par de dólares... cuál me recomiendas?
small printer K series better.
what happens if you melt a small corner of the platform???
Nothing I melt mine and absolutely nothing happened
Hi. I have a question. How to fix the printing not align. From bottom to top print It become not align with the floor print and print bed always got off the print shape
Please share a photo to info@easythreed.com we will check whats reason.
for the sake of leveling how dou make the nozel part move to the end of the shaft?
if you have any questions. email to info@easythreed.com
we can send you leveling video
Is it possible to have multiple colors in the print, or is it purely the color of the filament put in?
it print single color.
Is it not possible to put a pause in the gcode and switch the filament?
I'm wondering this too, I was trying to change the filament halfway through realizing I didn't have enough for the current print, but can't seem to figure out how to feed the new color in. I've tried the original threading steps, I'm at a loss.
@@tyanifesac There is a g-code for pause. G-code is a programming language used by 3D printers to control the printing process. Pausing a print in G-code means temporarily stopping the printer from printing and then resuming it later. There are several ways to pause a print using G-code, such as using the M25 command to pause an SD print, the M226 command to initiate a G-code pause, or the M601 command to pause a print. The G04 command is another way to pause the printer for a certain amount of time, normally measured in seconds or milliseconds. This command is available on any 3D printer and can be added directly via the G-code or the slicer commands, depending on the model and slicer you’re running. Inserting that G-code pause is often as simple as inserting a G04 command, a G1 command, or an M1 command depending on the software and what you want from the pause.
My daughter got this for Christmas..please help..Im completely confused how to download images to the Tf card in the gcode format..I plugged the drive with the tf card into my laptop and opened it but I do not understand what Im looking at..I watched the video shows nothing on this process only operations. Is it because I have a chromebook? I downloaded the easyware from their unsecure site and it came through as a zip file??
inside TF card has software, manual video.
read the instructions for beginners .
more questions email to info@easythreed.com
Can the fan beside the nozzle be used?it doesn't seem to be running
Same here
@aplayz3024 I got it running. Basically, after u downloaded cura, u need to plug in the sd card given to your computer and go to file that says "manual,video,sofware>slicer sofware,video,manual>for mac/windowa(base on your os)>cura slicer>cura ser project of your printer>K7.
Cluck it then it will bring u to cura and a little while layer it will ask I to open as project or import model, chose open as project then it should work
it is possible to pause change the filament and print again..?
can't, but you cut the filament, and put a new filament follow the old one
trying to set up my printer can't install cura(I think I need it) says error launching installer any help would be great
contact info@easythreed.com to get a correct files.
I got this printer yesterday and I have tried to print 30+ items but it keeps only printing one thing and I kept making new files in cuts and it keeps printing out this one thing what should I do
hi. please contact info@easythreed.com send us your gcode. i think your gcode has problem. and please know the printer print only gcode file. and the file name with english or numbers only.
que tipo de actualizaciones le puedo hacer a mi k7 para que este en mejores condiciones (como pantalla)
what you want to do ?
@@Easythreed3D ponerle mando offline y pantalla mas que nada agregarle funciones
What if my kid lost the Tf card what can I use or where can I order one
tf card order link:
www.aliexpress.com/item/4000850754865.html?spm=a2g0o.store_pc_groupList.8148356.3.788e1f5atxDruF&pdp_npi=2%40dis%21USD%21US%20%245.50%21US%20%245.50%21%21%21%21%21%402132a22e16641702457692236ed815%2110000009375314853%21sh&gatewayAdapt=4itemAdapt
K7 files download link:
K7 TF card files package.
drive.google.com/drive/folders/1KhQsT28kBmA67lmX97smXIqGLYv0taqK?usp=sharing
Why are the cura settings not there in website
here is the video
ruclips.net/video/wV7TkN3FsOA/видео.html
can i ask what is the usb type b used for? ( i want to buy easythreed but dont know what model is better k7 or k9?)
both similar.
@@Easythreed3D and what is the usb type b used for?
usb for connect computer, but not for newbee
What's the difference of X1 from K7? which one is more recent?
similar function, chips different, X1 with 4 keys, K7 with one key.
Does you nozzle look slightly bent at an angle? I made sure it was a paper width away on all sides.
sorry, i can't catch your meaning, pleaes take a photo to info@easythreed.com to explain more , thanks.
Can it do detailed designs or just simple ones?
you can make any design, and print it.
You can make make complex design, but it might take some tweaking on the settings
Does it have a part cooling fan?
easythreed.aliexpress.com online shop
how to print with USB
email to info@easythreed.com
I got mine today.. Cool stuff
My printer wont feed please help
can't feed and retract， check reason
ruclips.net/video/pn63UDXZq9c/видео.html
feed not good during printing， check reason
ruclips.net/video/PZUhnDcqyJg/видео.html
What is the diffrence between the x1 and k7 ?
design different, motherboard chip different. X1 with 4 buttons control. K7 with 1 button control.
Hey there! Can I ask what's the difference between the K1 and K7? Which is better and most improved?
K7 Cheaper. K1 more stable. K7 one button control. K1 4 buttons control. printing quality same, build volumn same.
One question is this better than the X1, and while mods could improve the products, what would be the product I could improve the most
sorry. i didnt get what you mean.
@@Easythreed3D Is this 3D Printer better than the EasyThreeD X1, and what is a printer aside the X1 that is comparable
@@pifre3051 not better than X1, cheaper than X1. Functional similar.
@@Easythreed3D Oooh, thanks
Is possible use repetier host software?
i think no.
Yes, it works flawless.
is this better than the X1? Does this have Part Cooling already?
cooling already, both good
@@Easythreed3D can it fit 1 Kilogram of filament spool?
@@sjbox you can use a separate spool
Hey! Can we upgrade print size to 150mm or 200mm?
i think can't , but our X1 model have a version 150x200x200mm
Can it use PLA+?
i think no problem. you try to adjust the temperature.
@@Easythreed3D oh okay, thank you! I got a bit scared 😂
how much will it cost?
aliexpress will sell 79usd
79USD , ready to deliver, in BANGGOOD, TOMTOP, ALIEXPRESS
Sent the links
@@tomhankstomhanks2579 where are you from? US can search EasyThreed K7 on TEMU
where to by it at
next month online sell
next month im aliexpress
How much the price is
aliexpress will sell 79usd
@@Easythreed3D nice
@@Easythreed3D can you tell me how to fix underextrusion on the easythreed nano?
@@linuschegaming can you take a short video send to info@easythreed.com?
i reallllllly want one but only they were in india i wishhhhh
i always love watching this video then imagining i will get one but never do, this makes me sad
Do you have temu cuz you can buy one on temu
Cool! does it print PLA and PETG?
PLA TPU
@@Easythreed3D Nice! I bought one in bangood, it will arive to me next month. I hope I can print some cool things with it. thanks Bro!
@@Easythreed3D I followed you guys in the faceBook and you have a support in whatsapp too, am I right?
@@vilmondesribeiro4363 yes. you are right
hi, i just bought the printer recently and i got an issue, the printer stops while is working and i dont know why. It only made the base and it stops and thats it, do you know how to fix this error?
please email to info@easythreed.com or share video to whatsapp +8613823704046
you can try another gcode. format the TF card to FAT32. some time is gcode problem
thx :)
Can i have 1 to review it in my twitter account
contact Info@easythreed.com
The machine is awful it doesn’t work on my 3rd print it started glitching out and wouldn’t make anything and it would just randomly move around faster then regularly not doing anything
hi. can you share video and photo details to info@easythreed.com we will find out what's problem.
@@Easythreed3D yes the web page is un available
@@Noctyrn_10 EMAIL info@easythreed.com
@@Easythreed3D I already did I’m not getting anything back
@@Noctyrn_10 Whatsapp +8613823704046
買おうかな
next month in aliexpresss