Making a Knife from an old Saw Blade
HTML-код
- Опубликовано: 26 сен 2024
- Hello, my friend.In this video, I will make a knife from an old saw blade that I found in my garage.If you liked this video, then don't forget to like and subscribe to the channel so that you don't miss the next video!
First person I’ve seen put a saw blade into the forge. Most blades are already forged and do not require the forging and annealing process. Beautiful knife in the end!
Thank 😊
Do you sell such knives?
Don't steel weaken when cut or damaged? Something to do about stress or fatigue or something? Maybe that's why... Or is that just for aluminum?...
I think the main thing I like about Your knives is they're not museum
pieces , or , safe Queens ! I've never seen anything You've made on RUclips that I wouldn't be proud to own ,or , be afraid to actually use for it's intended purpose ! You are a talented Craftsman ( far & Few
in between these days ... that thinks Their crap doesn't stink ) !
Thank you for the comment, I am very pleased to hear it! ☺️☺️☺️
Die maker stones will cut your finish time in half. Nice knife!
The magnet trick is genius but also ao obvious at the same time definitely be useing that trick
Brilliant, reminds me of Jimmy Lile grey ghost knife
Beautiful work. I personally don't like finger grooves on handles, but if it's custom made for your hand then I guess they make sense
Thank)
Those finger grooves is one of the biggest and most elementary misconceptions in knife design. Then really make it totally inconvenient.
Channel name...Edward Knife Hands...make a little play on Edward Scissor Hands...nice blade
The most fun part for me is the handle...love sculpting the wood...
Грамотный мужик 👍
Bravissimo! Veramente un ottimo lavoro! Anche lo stile del coltello è bellissimo! 👏👏👏👏👏👏👏👏👏👏👏👏
Thanks 😊
From an old saw blade?
Wow!
A real wok of art.
All the best.👍🏾🇬🇧
congratulations for your work it was great 👍
Спасибо! Отличное видео
👍
Beautiful knife. Stone wash texture look cool.
Thank you 😊
Beautiful Knife and finishing .. 👍
Thank you!)
Edward Knives, Very nice. I love the finished Knife.
Thank you👍💫
@@edwardknives8692 do you have the mold of the knife, her design to print
I draw all the knife designs immediately before making them🙂
The design from the handle is great. Ciao
Thank you 🙂👌
i love the knife w/ beautiful and safety handle👍❤️👍❤️👍
👍😊
Good material for making knife, sharp knife
Spectacular work 👏
Thank)
Not crazy bout finger grooves. But the knife is beautiful. I love saw blade knives.. the just heat treat so easy.. they get super hard but you can still fix a warp before tempering . And you got the best drill bits in the world
Finger grooves is one of knife design's biggest and most obvious mistakes. Trash.
Beautiful & skillful work 👍
Excelent thanks four your video.
Thank you for watching this video!
Great job bro. Congrats.
Knife from saw blade has very good quality. Great job friend 👍
Thanks! 😊 👍
Maybe check into a good set of Japanese whetstones, or a lansky set up. Enjoy.
Nice..
I❤️it.. 👍🇲🇨
Ob I really like the Holes all in the Tang. Will hold in the handles perfect and tough. Really good Technique also. Takes alot of handle pin guess work. Great gob buddy. Very noce skillz
Thank you 🙏🏻
عبد
This is the first one who used actually good saw blade and not the junk with welded teeth like a lot of others so called 'knifemakers'. This could be actually good knife with solid edge retention. The heat treatment looks too high temperature but camera and display can lie, I miss only some test of blade after hardening like chopping bones etc.
My thoughts exactly. I use these old style blades all the time. I strongly suggest annealing them right after cutting them out or drilling can be extremely difficult also makes it easier to grind.
Can I buy one?
Compare to redymade stainless steel knife in market such knifes are far better and good. I use to make knifes. Knifes made from saw blade is good quality can last for years.. Imp is hardening and oil tempering.
Nice work, plain but beautiful
Thanks)
Beautiful, true craftsmanship √
Thank you 👍🏼🙏🏻
hand filing is love
👍
Muito bom... Mais um inscrito, aqui do Brasil...🇧🇷
Класс !!!
Все ножи холодняк!
Favoloso quella lama ,che tipo di acciaio e il disco dentato?
Bel video complimenti
Отличная сталь
Very Good job.
Badass knife....
That looks like a good knife
Great job 👊😎
Using a pair of calipers to scribe makes the hair on the back of my neck stand up.
Just wonderful.
👍🙂
Very nice knife!
MUITO LINDA PARABENS /SOCORRO SP BRASIL
Thank you 😊💫
@@edwardknives8692 4444
Lovely!!
👍
Good looking knife.
👍🙂
I’ve been making knives for 16 years and I learned quickly that unless you are the particular hand those notches were designed for these four fingers grooves are super uncomfortable.. fine if you have measurements but we almost never do
This is absolutely true. Finger grooves is one of knife design's biggest and most obvious mistakes. They make a knife nearly unusable. Measurements? No, they don't save it. This is not how the human body works. We all need to change the position of our bodies from time to time, the position of our fingers, and so on.
I got saw blade in my workshop also waiting to be something else than just rust collector :) Good job man!
😁👍
@@edwardknives8692.
Прекрасная работа все строго по технологии
Спасибо)
@@edwardknives86929 3
Well done my friend.I finally see a four finger grip.everyone goes and does it for three.I can't understand them.because it doesn't hold well in the hand with three fingers
The saw blade was cool. You dont see a alot of those anymore.
Mantap ❤👍❤🙏
What drill bits do you use to drill your holes in the handle on the "hardened" sawblade?? Nice job.........thank you.
Prior to quenching, would you normalize a blade cut from a circular saw blade? Assuming it is some form of tool steel other then that I don't know it's composition?
Thanks.
Great knife bro 😊
👏👏👏👏
Very good
Thanks
Сподобався що аж собі такого захотів!
Хороший нож. Если на излом его не нагружать, то будет служить вечно.
Anybody who cuts groves in the handle of a knife really doesn't know what is being ergonomic.
Отлично, я тоже практикую изготовление ножей из циркулярных пил.
Здравствуйте! Подскажите пожалуйста, после того как металл расколил, во что его опустил?
@@Tetis797 Масло льняное.
@@Tetis797 Но потом на час в духовку на 200 градусов.
@@kucigal8993 микроволновая печь? или духовка газплиты?
@@nurlan.rakhmanov.9318 Обычная печь на дровах.
Parabéns perfeito 👏👏👏👏👏
😊
@@edwardknives8692 ٠
١١
1он жу хьо вухьун мастер
That's nice. Wooden handle is beautiful. What kind of wood?
Угол заточки потерян, на резе бумаги видно, что заточка была клочками, а не целиком кромка точилась. По изготовлению вопросов нет, все отлично. На заточке бы руку набить и будет все супер, успехов!
🙏👍
Mandou bem. Parabéns.
Like from Brazil. 👍🔰
Thank you☺️
What is that small tool he's using to do the small grooves on the handle in the beginning?
Przepięknie jest zrobiony i wykonany ten z raczyła nuż pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍
OOO those fingers grooves, they look so painful. Personally, i don't like finger grooves on knives, they make the knife look ugly.
Another great knife! I look forward to the next one.
From Japan.
Thank you for the many informative videos!
Let me ask you a question.
How thick saw blade?
I have a many 2mm old saw blade and would like to see it made in . Is it too thin?
LOVE THIS!!
What is that holder called that you clamp the knife to while grinding on the belt sander? I see other ppl use them too
Lol doorhinge clamp
Old saw blades like that is good steel for knives. Oops the secret is out. 😉
😄👍
Looks good , I wonder what it would would test to on the Rockwell Scale
What’s the Rockwell scale?
About 59-60
@@domtoretto1677the hardness of the finished and tempered blade steel
Very cool knife bro, love the dark look.
Thank you, colleague!🙂
Is a old saw blade better to use ?
Beautiful Knife. The wood scales are really pretty. Well done. What kind of steel does the old saw blade have?
This is a Soviet-era saw blade.Steel 9 HF
☺️
What type of iron a saw blade?
Sorry if you answered this all ready. How thick is that saw blade? I bought one but i think mine is thinner! Just wondering.
Lindo demais, parabéns
Мне тоже нравится этот материал.Хороший рез !А ты хороший мастер
Now for some leather work.
beautiful knife but really dull edge neeed to sharpened properly
Para oscurecer la hoja que lo metes en acido revelador?? Un saludo
Quando vejo uma pessoa fazer isso com um paquímetro...💔
обясните пожалуйста что за клей метал и дерево клеить
Good morning friend.very top the design of this knife you could share the mold.with us in pdf grateful.
Мастеровой!!!
Is that a converted door hinge at 4:05 ?
I'd like to ask a question: I'm trying to make a knife from a sawblade too, but the steel is just too tough to be ground, how could you grind so much material? I tried to anneal the steel with the gas forge but the change was minor. Do you have any advice? Thanks for the video!
Normalize it a number of times
Also, why not forge it?
@@bondarkenergy I did it with the gas forge (not controlled temperature) a few times. Then I left it in the fireplace with hot coal for a day and a night until it cooled down slowly: still a minor change, the grinding belts have worn a lot without grinding too much. 😓
@@bondarkenergy I can't forge it because it's too thin. I probably could have tried to hammer it just to see if it would change its structure, that's right!
Thanks for your answers!
I did it like you, but it rusted after use. What do you advise?
This knife does not like moisture.After use, it must be wiped dry)
Конец света розрезали последний настоящий метал.
Where to get the template for the knife.. i love the design.. i would love to make one..
I drew it myself, but I've already lost the template(
Hand sanding with that point 😱
Did you stab yourself while sanding? That point is soooo pin sharp!
There's nothing wrong with me🙂
@@edwardknives8692
👍🏻👍🏻👍🏻
very nice job. what do u use for acid in the first bottle ?
Thanks)
Nitric acid
How thick was that saw blade? knife looks great BTW
Thank you!) Thickness 2.5 mm
3/32nds in American.
👍
Quanto custa uma faca dessa
Good knife but did not look very sharp
Bu taslak elinde var mı kardeşim?
Yok(