KNX Remote ETS Programming by 1Home

In today's episode "KNX Remote ETS Programming by 1Home".
This tutorial is about Remote ETS Programming (How to connect to a KNX Installation Remotely)
The default IP Port of the KNX IP Port Interface is the 3671.
In order to access this port remotely from outside World you will need port forwarding.
But port forwarding in KNX is a big security risk. It is like to give in a stranger the keys for your house.
That's why you should always avoid port forwarding.
So the best solution for remote access in KNX is VPN (Virtual Private Network).
You can setup a VPN connection using a Router that supports VPN,
or using a KNX device with empedded VPN Server,
or using 1Home Remote Access.
In order to start using Remote Access Service you will need a 1Home Device, like 1Home Bridge.
1Home Official Web Page : www.1home.io/knx-loxone-partn...
1Home Bridge RUclips Review : • 1Home KNX Bridge - Rea...
Please have in mind that in order to work on a KNX project you need to be certified.
You can find Certified KNX Training Centres in the link below.
www.knx.org/knx-en/for-profes...
Poseidwn Tech on Social Media:
www.poseidwn.tech
/ poseidwn_tech
/ poseidwn.tech
/ poseidwn.tech
/ poseidwntech
KNX Tutorials Playlist : • KNX Tutorials
KNX Web Page : www.knx.org/knx-en/index.php
ETS Software : www.knx.org/knx-en/software/e...
KNX Training : my.knx.org/
KNX Basic Course Documentation : amzn.to/2pASDCM
KNX Advanced Course Documentation : amzn.to/2I1mw68

[@thatwasawsome8753]

Great . Please make more videos about phone connections to knx

[@aljazmedved3349]

Whz IKE autehntication credentials are unacceptable error shows when connecting ?

[@wl1686]

Will this work if ISP implements carrier grade NAT / double NAT?

[@PoseidwnTech]

I believe yes but it will be better to send an email to 1Home Support in order to be 100% sure!

[@bilguunbatsuuri4733]

Hello dear
first of all thank you for your great tutorial.
now i am using ETS5 Lite. you know i can program only 20 devices in one project. so each devices have own individual addresses.
if i program the 40 devices 20 by 20, then connect these with knx bus, it will work or not? please answer my question

[@PoseidwnTech]

You will need to create 2 ETS projects and you will have to be very careful with the individuals addresses and Group Addresses.

[@mahammadsathalya647]

Hello, can we use the 1 home mobile app through remote access..