How To Make Flywheel Spring Machine Full Prosses Free Energy Generator With 5 Spring
HTML-код
- Опубликовано: 26 сен 2024
- How To Make Flywheel Spring Machine Full Prosses Free Energy Generator With 5 Spring And Flywheel Self Running Machine
#free_energy
#spring_free_energy
#diy
For more information visit our website = inverter110.com/
"Ingenious design! This video showcases a brilliant DIY project, demonstrating how to create a self-running machine utilizing just five springs, a flywheel, bearings, and a frame. The simplicity of the components used highlights the power of innovative thinking in engineering."
The energy problem of the world is solved😂
Acutually that does't work. Just for content only.
I struggle to understand that people actually think this works because it CAN'T.
There's no amazing perpetual motion, it's utter BS. It's basic physics that says it won't work.
I should build something like it and show you how they conned you to believing it, it's not difficult.
These spring flywheel motors do work. If you can figure out the timing right. How do I know? I have made several myself using different ideas on the configuration. I have made one similar to this one though I had 8 springs and I set them at 12.5% offsets around the shaft. It worked fine though I noticed (with work on it and no work on it)that if you looked at it long enough you could see what looked like a slow down for what seemed a mili-second and then caught up though if you looked at it long enough there was a pattern. It still produced work of a full load of about 50 amps consistently under a load for several days and then I shut it off.
Those nay sayers out there that say you can get anything from nothing are not looking at this correctly. Springs are a form of energy try to pull on a heavier one and you will see you cannot hold it for long in the stretched position it will pull back anyone knows that though when you can harness it and use a flywheel to hold the energy consistency through inertia no different that a gas or diesel engine or even a transmission. If you do not have a flywheel in any one these will not overcome the initial force to get it going if there is any torque at all.
The latest flywheel motor I have made is set up like an 8 cylinder engine. I have it set up in the same way the firing sequence is set up on some V8’s 1,8.4.3,6,5,7,2. I have noticed that it is much easier to start and the consistency of how it runs with zero slow down and speed up. I can get more work out of the way I have it set up now. Saying all thing I have made sure that everything is close to perfectly balanced as possible. The flywheel I am using on this one lis 30 inches and is close to 50 pounds.
I am currently working on several other versions to see what advantages and disadvantages there are with the changes I am making. We shall see
I am so surprised people having done this way before now. For those out there that are thing about trying this. Go for it. Just use common since on how you set it up.
ต้องเอานาฬิกามาตั้งไว้ให้ดูด้วย ฉันถึงจะเชื่อคุณ
Klasse, ich wollte mir gerade Solarmodule kaufen, da fahre ich doch morgen kurz zum Schrottplatz und hab gegen Abend schon alles fertig, Generator an die Welle und der Strom fließt 😂
نرحو منك اعلامنا في حال نجاح هذا العمل معك ..واخبارنا الحقيقة
This is brilliant! I've seen a few videos of this thate were fake. But this one looks genuine to me. Good work 👍
Thank you so much 😀
😂😂😂😂
To taka sztuka dla sztuki, jeśli będzie się kręcić nadal pod obciążeniem, na przykład prądnicy a nie tylko na biegu jałowym to ma mens, w przeciwnym razie to tylko zabawka
I've never seen @multi Electro, writing a comment once. Probably only like to click like!
can you please set up a livestream of this machine running for extended periods of time to verify your claims of self sustained operation
Felicitaciones amigo lo importante no rendirce y probar de muchas manera pienso hacer algo así parecido pero diferente ojalá también me funcione con la idea que tengo pienso que si bendiciones
Наложение масок и видеомонтаж, творит чудеса.
Нет там никакого монтажа как и магии, работает только при нечетном количестве пружин. Любая равновесная система обречена на провал, а тут как раз наоборот, потому и работает, вот только мощей у неё мало. Под нагрузкой не заработает.
You are on the track, the video is clear, video editing is not seen here, engineers can clearly understand the principle you follow. Its great thinking my friend. 👍
Ok, thanks
It is not producing energy but first springs re compressed
😂😂😂😂
Wouldn't it be a wonderful thing if something so simple actually worked?
Hello this looks good, now put a resistance on this and see if it still runs. Like a generator
Attach a Onipko turbine and dynamo to make electricity quite clever ha ha .
Bonjour c'est fantastique. Mais je doute, la physique nous explique qu'il ne peut avoir une rotation sans énergie ect.. c'est dommage que vous ne donnez pas assez de détails sur les positions des arbres à cames pour le fixation des ressorts, et c'est normal qu'il sont sur le même axe en bas, je vais tester voir 👍👏
привет это правда или нет
Happy to subscribe.I think this is the real deal❤
It's design was created without the advantage of using sacred geometry, thus, not achieving harmonic resonance in the system. Six crank journals, offset at 60 degrees of separation will offer resonance. The real problem comes from the lack of torque to overcome the Lenz effect that's created inside the generator...
Put yhe analog clock in the front,if you can prove them wrong👍👍
Wow that's great , I made my car run on gas that i made by eating 25 cans of baked beans and then i simply insert a tube in my date and it goes for ages but the kids dont like the smell , Thanks for the great vid ,
Расходимся, нас не..бали.
Good job! Like the 4-spring better.
Thanks 👍
@@MULTIELECTRON सर क्या ये रियल हे
@@MULTIELECTRON ....
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
Apakah ini benar-benar nyata,kalau benar,saya pesan 1,,berapa harganya?
هل هذه الالة تستطيع انتاج 5kwحقا@@budinanto9686
For RPM to be faster, the varnish must be matched in comparison to the crankshaft length and thickness, and the flywheel must be bigger or heavier so that the rotation speed will be faster. RPM이 더빠르게 할려면, 크랭크 축 길이와 두께에 비레해서 바란스가 맞아야 하고, 플라이휠이 좀더 크던지 무게가 더나가야 회전수가 빠를거 같습니다.
So amazing, i wonder how long this machine can run, forever, an hour or few minutes? how ever it is, it's so grade
Only five secind
How long does it work and why does it not stop blooming?
Quá tuyêt vời .khỏi cần gió❤
La polea de tiro debe ir junto con la fe impulso, en medio de dos balineras con intervalos cortos, y la tercera al lado contrario Delos resortes, los codos oh bancadas deben ser totalmente simétricas, muy largo el eje, para que aya moviento armónico y no aya desajuste,minimizar la vibración, y sino las balineras se desbaratan ligero
Necessity is the mother of invention,go ahead with modifications
Sa rrotullime në minutë ju jepë ? Numrin e rrotullimeve e shtoni me dy mënyra susta më të fuqishme me distancën që keni ose me rritjen e distancës duke rritë tensionimin po me këto susta.Rruga tjetër volantë më të madhë në peshë.Duhet të përshtaten xhirot me gjeneratorin për të patë hz 50 dhe voltë 230 për funksion normal të paisjeve elektrike. Pêrgëzime dhe suksese !
it looks great ..just a suggestion,,can you put a timer somewhere near the machine so that the viewers can see how much longer the machine can work???
Thanks for the tip!
هاذي الفكره ممتازه بس كانت بحاجه الى حذافه اكبر وسته اسبرنج مش خمسه ومتور كهربائي صغير يساعدها على القدرة لتويد الكهرباء المجاني
I second
وانا ايضا فكرت في هذا
Maybe a heavier flywheel, and an even number of springs, I would also include a gear system for the generator to get it spinning faster that the fly wheel.
For one time, something is wrong. You don't show the opposite side of the flywheel of your camshaft. Something hide it.
Show us complete configuration...
o video está em looping, ctrlC ctrlV ctrlC ctrlV.......
There's nothing hidden my friend, everything is called kinetic energy.. just try urs out and see before complaining and if u watch the video its live and no cut
The pull force of the springs are not balance. You need to adjust the tension of the springs.
@@hillarygreat8523 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
😅🤣😂😅🤣😂😅🤣😂 ...
Yes the springs should be 6th or seventh harmonic major or minor scale in D key major
Good 👍 project 💯
Yes, thank you
Soon total free electricity will emerge, kudos
WOW that's Awesome . SKK .
С правой стороны крутит мотор.
На видио видно как дергается электрокакбель мотора в тон 😊
You didn't show how the machine works in its entirety, apart from that in the sound you can hear the sound of the electric motor on the camera. It's aesthetically mounted, it's easy to divide the image and show only the working things.
Very nice. More videos please.
Thank you, I will
@@MULTIELECTRON технические подсказки нужны , или ты просто лайкоклянчишь ?
Good job bro keepit up...
Thanks
I need buy one sir
No,still yet to be provided , Go ahead.
All the Best 👍👍
All the best
Satu copoolnya lagi dikasih beban air disebelah agar tarik menarik menjadi episien bertambah cepat mantap
Amazing. Springs should be exactly positioned I think to keep going yes??!!!
I think so too!
I believe this is real my friend👍you are genius!
thanks
how did you cut the main centre shaft where the bearings join onto the springs and the gaps are? You did not show that on video as that is a solid steel shaft and difficult to cut, well I believe it would be solid steel so need to work out how to do this at home environment.
Very easy to cut out with an angle grinder once the spring holders are welded on .
Paling paling daya tahannya cuma hitungan menit
It really works, but you have to have the unicorn horn powder.
Felicitari🎉 daca functoneaza daca nu este o jucarie pentru film si dati toate detaliile pentru a fi reprodusa daca nu dati este intradevar o jucarie care va aduce vizionari
😮you could do a fly wheel 2.5 the size, it will speed up the mechanics and keep it running with excess energy to power a generator.
Debería poner un reloj ⌚ grande para ver cómo se comporta y dejarlo media hora
Add magnet 🧲 in opposite direction oto the flywheel for continue rotation
yes you are wright
yes its more effective if you add a strong neudenium magnet on the opposite side that acts like a piston
the position of the magnet should be north to north to produce a very strong reppelant force that will force the spring to go down even at the heavy torqe load
But how to store the power generated from the propelling wheel?
Very cool!! Yes you could add the magnets! Also if you can adjust the tension of the springs and the distance of the magnets while it’s running, that would give you control of the flywheel speed.
How about some specifics, like how much spring pull for weight of flywheel, how many degrees offset on crank per spring, angle of spring pull. Is the flywheel balanced or weighted at different points .. etc...
??? You don't need specifics to know that this is a scam which can never work, never mind how you design it in detail.
This is very simple. If this can turn a generator big and strong enough to run a home, then you have something worth looking into. But anyone who builds this just to light up a few light bulbs or a couple of power tools, the what is the point.
Tenho. Um projeto. Que. Funciona. Movido a água. 🌻CONTUDO🍁🍀 ESSA MÁQUINA. 🌿 E MUITO. SUPERIOR. MINHA. MÁQUINA. NÃO. SERIA TÃO. 🌾VELOZ. 🌵🍑🍇🍁🍍 DEVO. JOGAR. NA. INTERNET. .. TAMBÉM. ( Belo. Horizonte.... MINAS GERAIS. BRASIL.
I only have one question. I understand why it works and how it works, but how do you stop it?
Easy, it will stop itself.
Bhai ye spin kare baad kabtak rotate hoga
Parece real, no se tengo mis dudas, aunque la física afirma q el movimiento perpetuo no es posible, en este pequeño planeta cabe detodo, lo voy a intentar😮
Well all I needed to see was that ground clamp on the welder.... who does that?
ЖАЛЬ ЧТО В РОССИИ ЭТО НЕ РАБОТАЕТ, ЗДЕСЬ КЛИМАТ ДРУГОЙ 😁
It looks nice, but as far as I know it will produce electricity it is not enough spinning on itself, more power to run the dynamo so that will be the big problem "extra power"
Does these engjine comes with a turbo version 🤔
Valuable work..⭐⭐👍 If this mechanism is assisted with a small electric motor, it would start a large 10 kilowatt electric generator. 💚⭐⭐
Great! For how long, if it would ever stop, would it run the generator?
Brawo😃👍👍👍
La NASA ya está buscándote 🗿👍
So what will happen.
TQ boss
Should be added discbrek and abs system to stopping
Это не работает он остановится . чтобы растянуть пружину нужна энергия. Одна пружина растягивается другая сжимается они взаимно противостоят друг к другу они будут гасить друг друга и остановятся на некомрастянутом состоянии
Si es capaz de girar una hora sin parar, te lo compro.
Si no, no nos hagas perder tiempo!!!!!
How much price thish messin
Секундомер на телефоне надо ставить рядом, а то кажется сщивка кадров
Friction will win.
Этоже пепелац и гравицапа не нужна...
EU. TIAMO.
thank you
เยี่ยมจริงหรือนี่?
Indian people are most genius
Nice
Аслида хеч кайси техникани Инсон яратган эмас деб уйлайман, бугунги телефон компютерларни 100 йил аввал ихтиро килишганида ишламас эди, бу пружинали диск хам, Инсон истаги, мухтожлигида Оллох яратади, биз эса мен, мен, мен деймиз.
Xôp nima qilish kerak endi xamma narsani ollox yaratadi deb, hech narsa qimasdan ôtirish kerakmi
♥
alguien de España que quiera investigar de como hacer uno como experimentación?
Your flywheel is a 45 lbs. lifting right ??
Wow l bet the first one of these has been locked up in a warehouse at area 51 for a hundred years.
👍👍👍
Nice broo 👌
Thanks 🔥
saya baru percaya kalau ada jam digital besar disampingnya
Basic of Crankshaft system
Very weak and small spring. Load dani ke bad is spring ke takat khatam ho jaye ge
Does anybody ever put a load on these contraptions? Let’s see if they can produce any power.
How did you stop the flywheel?
It can't be stopped .
Try made bicycle with spring engine :D
hello engineer please give us secret how to do this
😉👍👍
🙏🙏
Хорошо если добавить генератор и маленький эл мотор для поддержания вращения?
Interessante até e mais isso ai não tem velocidade pra tocar nada nem um gerador não da muito pouco velocidade
Even if the thing turns,you won’t have enough torque to turn anything else
Bello moto perpetua.😊
Why was it necessary to make such a large iron platform for such a small product???
Quanto tempo, dinheiro, material e esforço, para fabricar algo que, qualquer aluno de ensino médio bem informado, sabe que: não existem máquinas de movinento contínuo, e que nenhuma máquina movida com qualquer tipo de energia rende 100% por tanto até mesmo tendo uma fonte externa de energía ela não consegue sequer devolver como outro tipo de energia ou trabalho na mesma quantidade que ela mesmo consome...
A 2a lei da termodinâmica é um carrasco implacável.
Now you can diconect from the Grid
😮मैं एक गुलोटीन और ईले. चेअर की डिजाइन में लगा हूं इन सब फ्री एनर्जी वालों के लिए!😅
por que tiene que esconderse?