Hi Can you tell me if there is any size marking on the main belt? I've just bought the planer but it's missing the belt and dewalt don't supply them any longer. Many thanks mike
Great machine!I recently got one from an old woodworker in my town.I took it all apart to clean it and after putting it back together...couldn't remember one thing...which set of springs(strong set and soft set) for the feed mechanism goes on which roller (infeed - outfeed).Would appreciate that help :)
I've done the same thing. Didn't notice the difference until I started putting it together. I assumed strongest on outfeed but any advice would be gratefully received
Hi Piotr, I have the same machine, I didn't realise when I replaced the rollers that there are two different springs. One set is stronger than the other. How are these arranged on your machine? Are the stronger springs at the rear on the outfeed roller? Thanks for your help
Hi, I have one too. I stripped it down to replace broken parts. I didn't notice that there are two different roller springs. One set is stronger that the other, could you help by telling me the position of the stronger springs on your machine please? Thanks for your help
Hi. I just bought a machine identical to this one. But I'm so much an amateur, that I'm not sure how to find out which speed the thciknesser is set at. Can anyone help?
@@ASousaMakesIt Thanks for the answer - but my problem is, that I don't even know how to check which of the two speeds, it is set at. It doesn't say how in the manual.
@@ASousaMakesIt I have the same problem. I bought it used but it misses the part where link the dust pipe. I'm searching if there is a commercial part to buy but it's too old and the only possibility is to make by myself. If you find some alternative solution please share it with us :)
Excellent machine! I bought its Elu branded version last summer and used the DW1150 manual instructions to set it up. Works great!
Me too! I’ve just bought one today and can’t find anything in English ! Yours still going ?!
Great help. Thanks
I have one too, its very well built. I paid about £300 for mine (roughly $400) a few years ago.
Hi Can you tell me if there is any size marking on the main belt? I've just bought the planer but it's missing the belt and dewalt don't supply them any longer. Many thanks mike
I have the Dw 733s great machine
Great video! I am looking at maybe buying a used one right now. Thank you! BTW have you made any form of dust collection on it?
Does anyone know how to find a guard for this machine?
Have the opportunity to pick one of these up, have been trying to decide if its a good buy. Looks like a solid old machine, good capacity as well.
Yes it all in casted iron. There is just two dowb points, no dust collection and the bed tables are hard to adjust.
Great machine!I recently got one from an old woodworker in my town.I took it all apart to clean it and after putting it back together...couldn't remember one thing...which set of springs(strong set and soft set) for the feed mechanism goes on which roller (infeed - outfeed).Would appreciate that help :)
I've done the same thing. Didn't notice the difference until I started putting it together. I assumed strongest on outfeed but any advice would be gratefully received
A final question: ¿It doesn’t has a dust hose for vaccum machine?
It does but its a separate accessory that you could buy. I dont know if you can still buy it.
I liked this machine how much it costs and where to find it ?
I just bouth dw 1161. Its the same machine. It have 2kw engine and have dust collection system! I like it a lot :)
Hi Piotr, I have the same machine, I didn't realise when I replaced the rollers that there are two different springs. One set is stronger than the other. How are these arranged on your machine? Are the stronger springs at the rear on the outfeed roller? Thanks for your help
Dimana bisa didapat mesin planer dewalt dw 150
Thanks for the review! I saw an old one one lis this model and your video helps me decide to buy it. Did you find separe blades easily?
You can get blades off ebay £25 per set
Hi, I have one too. I stripped it down to replace broken parts. I didn't notice that there are two different roller springs. One set is stronger that the other, could you help by telling me the position of the stronger springs on your machine please? Thanks for your help
Doesn’t really show if the piece of timber has been jointed accurately to achieve two flat surfaces at right angles ready for the thicknesser.
Hi. I just bought a machine identical to this one. But I'm so much an amateur, that I'm not sure how to find out which speed the thciknesser is set at. Can anyone help?
Try the slowest first, that works fine for me
@@ASousaMakesIt Thanks for the answer - but my problem is, that I don't even know how to check which of the two speeds, it is set at. It doesn't say how in the manual.
Have you ever adjusted/replaced the planer blades? I have the same machine and im not sure how much they need to stick out.
Yes I already replaced them. I align from the blade bevel top line
Send me a e-mail and I can send you some pictures of it
@@ASousaMakesIt email sent! Thanks
A question if I can. How much have you paid?
Sorry I can't say.
Can you connect dust collection to it?
No, the only way is to make a custom part for it.
@@ASousaMakesIt I have the same problem. I bought it used but it misses the part where link the dust pipe. I'm searching if there is a commercial part to buy but it's too old and the only possibility is to make by myself. If you find some alternative solution please share it with us :)
excuse me where i can buy this machine
Hi only a used ones. DeWalt don't sell this modelo anymore
Berapa harganya
Nice machinery ❤. Where can I get one??
You need to find used ones, dewalt doesn't make those anymore.
What the price in India?
27
Sir,I want one immediately, address-shemeem,malawayal,wayanad,Kerala,+91 9544707272
what was the point of this video, it told me nothing
This channel isn't an online school, the aim is just to share my projects and store a memory about the process how I made it.
Why the macho music, the nerdy noice ; it's a tool to be taken serious instead of glorified.
Macho music because I'm a macho Man!