@@asteriks_ct who asked you Welch , who lives with his mom at the aged of probably 20 ish. You wish you could do something with your pathetic life. Go hate on more people because your not happy with yourself
The handle rubber is around $12. Part number 6EG-G2177-00 Already bought a replacement for my 05' 25hp since I saw a crack. My 99' 6hp takes the same rubber too. I keep extras on hand.
I have the exact same motor and when I put it in neutral it wants to pop into forward. What should I do? I cant stand holding the gear in neutral by hand so it doesnt click against the gears.
Man, I have a Yamaha 25 and the rod that connects to shift it right in between the lower unit and the motor itself came loose somehow and I have no clue how to fix it. Please help.
Just cleaned my carbs new fuel primer ball and line brand new fuel filter OEM installed , new coils and new plugs. And fresh non ethanol fuel mixed 50:1…. Why is my sweet Yamaha 25 not idiling !?!?!? Help me out man it runs great wide open just can’t come to a stop and it stay running and idle at all . Also when I flush it it sometimes idles. It it pops and sputters and kinda sounds like it is missing But it’s got new coils . Are the carbs not synced right or my air fuel mixture not right ?
Hello, I received some good advice from you before, thank you. I would like to try again. My 30hp yamaha after your advice runs like a champ, but when I open it up ( tiller handle) it pulls real hard to the left
Can you help me with a 97 yamaha 30 horse oil injected electric start. Runs fine at idle and low power. When I power it up it sputters and the light comes on? Light indicates both temp and oil.
Is the oil injection working? I would run premix and forget about the injection. If the injection is not working, that maybe the cause for it running hot and the oil light letting you know, there is a problem with the injection.
I have a 1995 yamaha 25 (2)stroke. I'm having an issue with the pull start mechanism. It pulls out and retracts easy enough, but it takes an act of congress for it to catch and spin the flywheel. It has some kind of weird spring and small white plastic piece. Have you ever heard of this problem?
I have a 25 hp yamaha on a j14 carolina skiff. I’m only reaching about 15mph top speed. Wondering how to possibly increase this/what to change on the engine for more speed. Thanks, I enjoyed the video!
I'd check spark plug gap, analyze the plug ceramic for color/jetting issues. Clean the carbs and check that the linkage between throttle butterflies is synchronized (both carbs fully returning to idle and also both fully opening at full throttle). I'd check the fuel filter as well. I'd also check the prop for large dings and that its the correct diameter and pitch. I'd also replace the lower unit oil and impeller if they haven't been done recently. If none of that makes a large improvement, i'd check compression as well (you could do this first or at any point really). With a well running and correctly propped 25hp, you should be able to hit~25mph.
Hey man I have the same motor. However someone decided to paint it camo! They painted over the serial plate. I can tell it says 25ELH, I looked up and it says it might be a 2006-2008. However I was looking at yours and mine does not have that aluminum grey plate on the left side. Do you know where can I figure the exact year of my outboard? I am trying to buy a new water pump and carb kit. Thanks man!
Hey, quick question. I just bought a boat with a 06 Yamaha 25hp, I was on the water today after cleaning the carb and it was running good, idling for about 10 minutes then started to go out and the motor quit, took awhile to fire back up got it going then quit again, and I couldn't even pull the pull starter felt locked up. It cooled down then free'd up, when it runs on the hose it doesn't squirt the water out the side like yours does? Over heating problem possibly, bad impeller? What you think.
I would say "yes" to over heating. Especially if it starts back up after it cools down, plus the weak stream, tells me, it's time to change the impeller.
I have a 1985 Mariner..recently after putting a plate to improve planning , when I increase rpm's on console lever it begins to increase rpm and suddenly when under load in water it trolls back to idle rpm's involuntarily ..... what causes this? Please can I have your help with ideas?
Great videos!! I have an '08 25 hp Yamaha 2-stroke and this was really useful. It had been sitting a long time. I've got it to start but will only run 15-20 seconds before it dies then it takes a while before I can get it started again. I fogged the engine real good and changed out the fuel hose. I'm going to try spraying some carb cleaner into the air intake trying to avoid getting into the carbs. Do you have any other suggestions? I've also heard you mention detailing the engine but haven't seen a video on that. Can you explain what you do and how you restore the cowling from sun damage? Thanks in advance for your help!
I have the same motor. If the carbs have sat with bad fuel they will need to be cleaned. I just bit the bullet and bought two new carbs for $460 bucks from parts vu online. In my opinion if your carbs need a rebuild just buy new ones unless you really know what you doing. You need special screw drivers to work on the carbs and if a mechanic suggest a rebuild He is making more off labor to rebuild them then brand new carbs cost. Mine is perfect after new carbs new lower gear oil change new plugs new fuel filter and impeller.
3A you may want to first try to remove the carbs from the motor and give them a ultrasonic bath a shop would not charge you much to use their machine or can buy one at harbor freight. I tried to clean mine on my same 08 25hp but they needed more work. they sat a few years and were filled with white paste inside from the fuel and corossion . My Dad has a 2006 15hp it only has one carb and He was always cleaning it. It would run fine a week or two then bad again. He finally just bought a new carb his was only $85 for the 15hp model and its ran great since no issues. I just got my 08 25 on my 10 foot rib dingy last night took it to the beach it flies. I had only a 2.5 putt putt motor before the 25 put a smile on my face I had to be going 30mph or so. OK good luck with your Motor I called like 4 places Parts VU online had the best price on our Carbs oem Yamaha.
see told y'all Eric has a nice Johnson lol hey mike. did you guys catch some fish? I love working on small engines and your making me want to try my hand at a boat engine doesn't seem to different
Will never get a answer! Like the snot out of this channel but tried and tried a lot of videos finally just found another motor on Craigslist bought a 55
Cowl not hood Double u d 40 not dubba d 40 Water not wahder Actually not akshally Cause not cahz Culprit not coalprit Skeg not skag Run not ran Reverse not ruhverse Bolt not bowl Taken not tooken
Hey Eric,I love your vids and you have inspired me to do marine mechanics. Thank you so much
I wish I could go for it and good luck LOL!!
Bruh you play fortnite and you are probably 12💀
@@asteriks_ct who asked you Welch , who lives with his mom at the aged of probably 20 ish. You wish you could do something with your pathetic life. Go hate on more people because your not happy with yourself
@@williamaichinger2358 thank you
Hey that's great man! Follow your passion and don't let the downsides or naysayers put you down
The handle rubber is around $12. Part number 6EG-G2177-00 Already bought a replacement for my 05' 25hp since I saw a crack. My 99' 6hp takes the same rubber too. I keep extras on hand.
sdvten thanks
I have 2007 25hp Yamaha 2 stroke and the water won’t spit as hard as your did I’m trying get that fix what should I do
I have the exact same motor and when I put it in neutral it wants to pop into forward. What should I do? I cant stand holding the gear in neutral by hand so it doesnt click against the gears.
I like that you take the time to try out the motor before selling it! You are few and far betweenandan expert craftsman.Janet Conover
Man, I have a Yamaha 25 and the rod that connects to shift it right in between the lower unit and the motor itself came loose somehow and I have no clue how to fix it. Please help.
Can anyone tell me how to connect the choke rod?
Hey mate, I have a 2011 25hp. I've googled but I'm not certain where the thermostat is? Just wondering if you can point me in the right direction?
Could you upload a video on how you fix the gearselector? Mine is a bit slacky, guess its just a tensionproblem on the wires, but good to know
This might be an odd question, but I have the same engine. Can these 25hps be hooked up from the current tiller control to a shifter style control?
Just cleaned my carbs new fuel primer ball and line brand new fuel filter OEM installed , new coils and new plugs. And fresh non ethanol fuel mixed 50:1…. Why is my sweet Yamaha 25 not idiling !?!?!? Help me out man it runs great wide open just can’t come to a stop and it stay running and idle at all . Also when I flush it it sometimes idles. It it pops and sputters and kinda sounds like it is missing But it’s got new coils . Are the carbs not synced right or my air fuel mixture not right ?
What year motor? Newer models use 100:1 gas/oil ratio. You might be running too rich? Did you try turning up the idle?
Hello, I received some good advice from you before, thank you. I would like to try again. My 30hp yamaha after your advice runs like a champ, but when I open it up ( tiller handle) it pulls real hard to the left
Sounds like your trim tab where your prop is isn’t in the right place
May need to turn it
@@skandic440 is that the thing looks like an upside down shark fin?
Can you help me with a 97 yamaha 30 horse oil injected electric start. Runs fine at idle and low power. When I power it up it sputters and the light comes on? Light indicates both temp and oil.
Is the oil injection working? I would run premix and forget about the injection. If the injection is not working, that maybe the cause for it running hot and the oil light letting you know, there is a problem with the injection.
LOL you just pour gas out right into the ground. You probably live in Florida, right?
I have a 1995 yamaha 25 (2)stroke. I'm having an issue with the pull start mechanism. It pulls out and retracts easy enough, but it takes an act of congress for it to catch and spin the flywheel. It has some kind of weird spring and small white plastic piece. Have you ever heard of this problem?
called the pawl
what is the model #
Do 15 hp outboards have the that rubber grommet as well?
What does a 25 hp sells for these good look 25 Yamaha
I have a 25 hp yamaha on a j14 carolina skiff. I’m only reaching about 15mph top speed. Wondering how to possibly increase this/what to change on the engine for more speed. Thanks, I enjoyed the video!
I'd check spark plug gap, analyze the plug ceramic for color/jetting issues. Clean the carbs and check that the linkage between throttle butterflies is synchronized (both carbs fully returning to idle and also both fully opening at full throttle). I'd check the fuel filter as well. I'd also check the prop for large dings and that its the correct diameter and pitch. I'd also replace the lower unit oil and impeller if they haven't been done recently. If none of that makes a large improvement, i'd check compression as well (you could do this first or at any point really). With a well running and correctly propped 25hp, you should be able to hit~25mph.
Hey love your vids. Are you in the tampa area or where are you located. I have i 50hp johnson im trying to get running.
Hey bro have you ever taken a midsection off one of these engine? Is it an absolute mission or not to bad?
why dont you ever post a vid of that superjet,
Hi Eric, How would a person find out what motors you have for sale ?
what do you do with dirty fuel or fuel with water in it?
What oil mix would that engine take ? I have an older 25 Yamaha maybe mid 80s
This model / year is 100:1
Hey man I have the same motor. However someone decided to paint it camo! They painted over the serial plate. I can tell it says 25ELH, I looked up and it says it might be a 2006-2008. However I was looking at yours and mine does not have that aluminum grey plate on the left side. Do you know where can I figure the exact year of my outboard? I am trying to buy a new water pump and carb kit. Thanks man!
Look on the right side. Right above where it sits on the transom.
Hey, quick question. I just bought a boat with a 06 Yamaha 25hp, I was on the water today after cleaning the carb and it was running good, idling for about 10 minutes then started to go out and the motor quit, took awhile to fire back up got it going then quit again, and I couldn't even pull the pull starter felt locked up. It cooled down then free'd up, when it runs on the hose it doesn't squirt the water out the side like yours does? Over heating problem possibly, bad impeller? What you think.
I hope you havent overheated it yet and you defenetly need to check the impeller
It sounds like you have overheated your block. Did you run the mix too lean (if 2-stroke), if there is no "pee" on hose it sounds like your impeller.
I would say "yes" to over heating. Especially if it starts back up after it cools down, plus the weak stream, tells me, it's time to change the impeller.
Hello do you have any for sale???
You must like Yamaha are they better than Mercury or Suzuki ?
spring missing on tilt pin
Where do you list these motors at.. I'm looking for a 25 . Either Yamaha Suzuki Mercury
I never could get any answer finally just found one and bought a 55 hp for my 1754 allweld
I was trying to get a 25 or better because my 15 Yamaha wasn’t big enough for size of my boat for duck hunting
I asked and asked to try to figure just where he was posting think I found them on Craigslist Florida location
hi can you tell me what is the right size of propeller on the yamaha 25 hp?
That would probably depend on the weight and size of the boat.
I have a 1985 Mariner..recently after putting a plate to improve planning , when I increase rpm's on console lever it begins to increase rpm and suddenly when under load in water it trolls back to idle rpm's involuntarily ..... what causes this? Please can I have your help with ideas?
Check your spark and clean your carbs.
good job man. Thats cool you have a short shaft 40 johnny tiller. Its hard to find one. Most are long and remote around my area
i have a short remote electric 1990 if you are interested
I have a 2000 short shaft tiller, great engine bought brand new, deff rare and hard to find, only one OMC had in the warehouse when i bought it
Eric some of us touch up any and all paint after working on engines. So the paint trick is not always true.
did u put a clamp on the tell tale?????
Good content
Hallo Mr. eric adakah mesin yamaha 25pk yg seken, saya mau beli buat mancing..
Dang wish I had a mint condition 25hp electric start right now
I feel BLESSED - picked up a 2008 Brand New / used one in 2013 👍🙏🏻😎😁
Very inspiring!
Sooooo...wouldnt it have been easier to just clean the engine of the other unit and sell that instead of swapping all that stuff?
He means scratches and dents.
Boat guy I need a 25hp Yamaha how can I get contack
Rubber boot damaged during a install of the lower unit gone bad.
Great videos!! I have an '08 25 hp Yamaha 2-stroke and this was really useful. It had been sitting a long time. I've got it to start but will only run 15-20 seconds before it dies then it takes a while before I can get it started again. I fogged the engine real good and changed out the fuel hose. I'm going to try spraying some carb cleaner into the air intake trying to avoid getting into the carbs. Do you have any other suggestions?
I've also heard you mention detailing the engine but haven't seen a video on that. Can you explain what you do and how you restore the cowling from sun damage?
Thanks in advance for your help!
I have the same motor. If the carbs have sat with bad fuel they will need to be cleaned. I just bit the bullet and bought two new carbs for $460 bucks from parts vu online. In my opinion if your carbs need a rebuild just buy new ones unless you really know what you doing. You need special screw drivers to work on the carbs and if a mechanic suggest a rebuild He is making more off labor to rebuild them then brand new carbs cost. Mine is perfect after new carbs new lower gear oil change new plugs new fuel filter and impeller.
Brandon Lerman Good advice, thank you Brandon.
3A you may want to first try to remove the carbs from the motor and give them a ultrasonic bath a shop would not charge you much to use their machine or can buy one at harbor freight. I tried to clean mine on my same 08 25hp but they needed more work. they sat a few years and were filled with white paste inside from the fuel and corossion . My Dad has a 2006 15hp it only has one carb and He was always cleaning it. It would run fine a week or two then bad again. He finally just bought a new carb his was only $85 for the 15hp model and its ran great since no issues. I just got my 08 25 on my 10 foot rib dingy last night took it to the beach it flies. I had only a 2.5 putt putt motor before the 25 put a smile on my face I had to be going 30mph or so. OK good luck with your Motor I called like 4 places Parts VU online had the best price on our Carbs oem Yamaha.
sell it...... i will take it....
@@brandonlerman1540 h
What year model?
Great vid
see told y'all Eric has a nice Johnson lol hey mike. did you guys catch some fish? I love working on small engines and your making me want to try my hand at a boat engine doesn't seem to different
Got any motors for sale?
Will never get a answer! Like the snot out of this channel but tried and tried a lot of videos finally just found another motor on Craigslist bought a 55
Kirim ke indonesia bagus buat mancing👍🏽👍🏽
L'olio del piede non cambia mai colore quindi non ti devi affidare al colore ma si conta a ore (dette dal produttore)
Lets catch some fish man,... this sounds good to me.
I had old marineer 25 hp electric start think made by yamaha 😊
👍👍👍
dime precio
no gloves?
Why do you need gloves
I spy a super jet
yup lol
Eric Krzyzanowski yup
Do you have a personal email?
Oh yes it's a 25hp 2 stroke
let's be environmentally a bit more correct. Don't dump the gas in the filter bowl on the ground. Strain it and put it ion something. Every bit helps.
good morning beother...gif me 1 ingine boat..i from malaysia
Cowl not hood
Double u d 40 not dubba d 40
Water not wahder
Actually not akshally
Cause not cahz
Culprit not coalprit
Skeg not skag
Run not ran
Reverse not ruhverse
Bolt not bowl
Taken not tooken
George Canvin are you the self appointed vocabulary police for RUclips? WTF
Go F uself i mean yourself
Come on mate don’t be that guy
I need one of those hoods