Did You need to change engine module and steering wheel lock as well? Can You share list of parts used for this retro? (With MB numbers would be awesome) - I know that there are new door locks, door handles, door handle bases, couple of antennas (5pcs?), module in right side of the trunk, additional wire loom etc... I suppose that in prelift from 2012 it will be all the same..like in this FL from 2013
This is about retrofiting door handles for keyless access and keylessgo. No reason to change engine ecu. No relation with that. You need to change door locks and door handles for keyless access. For keylessgo you need to add 6 antena, keyfob and keylessgo ecu in trunk.
@@AstronBnX I was asking about ECU because in 211 I changed whole startup set from car with KG (ECU, steering wheel lock and ignition switch - maybe not necesary all of them hmm...) so You put there 4 KG door locks, 4 KG door handles, module in trunk, antennas, KG ignition switch with new KG keys and additional KG wire loom and at the end coded it in Xentry right? You write about 6 antennas - 2 for rear door, 1 in front behind comand, 1 in trunk behind rear bench, 1 at rear right roof frame and where is the last 1?
Orjinal ve Çin işi çözümler mevcut. Çin işi çözümler 1 gün içinde halledilebilir. Maliyetler için şasi numaranızı göndermeniz gerekir. Aracınızın alt yapısına göre, orjinal sistem fiyatlarda değişir.
@@AstronBnX sorry, didnt notice you were mentioning the w205. I want one of those chinese keyless go kits for the w207. Do you know how they compare to the oem keyless go in terms of safety?
Yine gayet başarılı. Ellerinize sağlık Reha Bey.
Teşekkürler :)
Did You need to change engine module and steering wheel lock as well? Can You share list of parts used for this retro? (With MB numbers would be awesome) - I know that there are new door locks, door handles, door handle bases, couple of antennas (5pcs?), module in right side of the trunk, additional wire loom etc... I suppose that in prelift from 2012 it will be all the same..like in this FL from 2013
This is about retrofiting door handles for keyless access and keylessgo. No reason to change engine ecu. No relation with that. You need to change door locks and door handles for keyless access. For keylessgo you need to add 6 antena, keyfob and keylessgo ecu in trunk.
@@AstronBnX I was asking about ECU because in 211 I changed whole startup set from car with KG (ECU, steering wheel lock and ignition switch - maybe not necesary all of them hmm...) so You put there 4 KG door locks, 4 KG door handles, module in trunk, antennas, KG ignition switch with new KG keys and additional KG wire loom and at the end coded it in Xentry right?
You write about 6 antennas - 2 for rear door, 1 in front behind comand, 1 in trunk behind rear bench, 1 at rear right roof frame and where is the last 1?
Maliyet ne kadar?
Eline saglık abi bizde keys goo lu w212 var yedek anaktarı yok aracın start stoplu araç buna yedek anaktar yapabilirmiyiz ?
Kontrol edebilmek icin Sase numaranizi astronbnx@gmail.com gondermeniz gerekir.
Maliyeti ne kadar bu işlemin
Şasi gondermeniz gerekiyor. Alt yapiya gore degisken. Astronbnx@gmail.com
@@AstronBnX Eline sağlık kardeşim. Çok güzel olmuş.
@Reha Biçer Reha bey w205 kasa araçlara da yapılabilir mi?Bu işlem kaç gün sürüyor?Tahmini maliyeti nedir?
Orjinal ve Çin işi çözümler mevcut. Çin işi çözümler 1 gün içinde halledilebilir. Maliyetler için şasi numaranızı göndermeniz gerekir. Aracınızın alt yapısına göre, orjinal sistem fiyatlarda değişir.
@@AstronBnX are chinese solutions safe?
@@DiogoSilva-hr8ee for w205, it is safe because they are using orginal keylessgo ecu.
@@AstronBnX sorry, didnt notice you were mentioning the w205. I want one of those chinese keyless go kits for the w207. Do you know how they compare to the oem keyless go in terms of safety?
@@DiogoSilva-hr8ee there is no chinese solution for w207 or w212