2wd DIY Smart Car chassis Kit || Assembling & Installation Process
HTML-код
- Опубликовано: 18 авг 2020
- 2wd DIY Smart Car chassis Kit || Assembling & Installation Process
Parts of the Kit:
1 layer Acrylic Car Chassis
2pcs - Geared Motor
4pcs - Fastener
4pcs - Encoder Disk
2pcs - 66mm Wheel Tire
Universal Wheel
Battery Holder
Small Rocker Switch
Set of Screws, Nut & Spacers:
4pcs - screws for motors
2pcs - screws for battery holder
8pcs - screws for universal wheel
4pcs - spacer for universal wheel
12pcs - nuts (4pcs - for the screws in motors, 8pcs - for the screws in universal wheel)
Installation Process:
STEP 1. Peel off the Sticker/protection wrap of the chassis & fastener.
STEP 2. Install the motor using the fastener and screws. (I prefer to put the encoder disk before installing the motors)
STEP 3: Install the universal wheel. (use the 4 spacers and 8 small screws)
STEP 4: Install the battery holder.
STEP 5: Insert the small rocker switch.
WATCH, TRY & LEARN
please like, subscribe and share for more videos of experiments to come.
Thank you for watching... - Наука
Nice content sir....nakakakuha ako ng idea...usefull din yan sa mga vlogger....salamat
Salamat po
Ayos yan dun sa bunso ko. Pagkatapos iassemble, babaklasin naman nya uli.. ha ha ha.
Hehe...pwede po