Nice video as always. Can you make a video on comparing different thickness of stencil there are. Why to use one over other and where lies a happy medium. Thanks
He probably ordered a laser cut stencil, basically just a sheet of stainless steel with holes where you want the paste to be, they are trivial to create with any good EDA tool.
The registration on this board is very good -the paste was exactly over the pads needing the solder. A sign of good craftsmanship - although modern solder mask is very forgiving so if you don't get it as well aligned as Steve it will probably still flow into the right position!
I know you are familiar with your project, elements, voltages, and later with setup, combinations, etc .... but most of us doesn't know what you are doing 🤔🤔 .. what is that setup screen, what program, what definitions for the elementals on pcb ....😮 If you prepare that video for viewers you should explain everything slowly step by step for us to understand, another way you and we waste of time
It worked first time? You sure no edit's? ;) Hahaha, just kidding. Nicely done!
Super clean board 👌
Interesting idea of driving LEDs. Thanks for sharing!
That solder montage background music really is something... like!
I'm slightly left wondering which vacuum pickup tool you're using there?
Nice video as always. Can you make a video on comparing different thickness of stencil there are. Why to use one over other and where lies a happy medium. Thanks
Hi there. Great video. Will you make a video about your reflow oven? Thanks in advance.
Everything worked fine first time. I had every confidance in you, Steve. Thanks for sharing.
Really cool video! I love it when a design just works the first time, it’s a great feeling.
Nice looking PCB, really interesting project. 2x👍
Hi Steve. Your designs are really good and everything related on this channel is great.
Do you use one size bigger footprints for the passives? Or is it just the zoom of the camera?
I think it's the 0805 "hand solder" footprint on kicad - just in case it needed rework. Next pcb will be normal sized
What software are you using to control the LEDs?
Might possibly be WLED...
Noob question. How did you get all the soldering paste placed so perfectly on all the correct soldering points on the board?
He probably ordered a laser cut stencil, basically just a sheet of stainless steel with holes where you want the paste to be, they are trivial to create with any good EDA tool.
When you order the pcb, you can order a stencil at the same time. You then squeegee solder paste onto the board
@@sdgelectronics Oh gotcha. Smart and simple solution. Thank you! :)
& Thanks @lbgstzockt8493 !
The registration on this board is very good -the paste was exactly over the pads needing the solder. A sign of good craftsmanship - although modern solder mask is very forgiving so if you don't get it as well aligned as Steve it will probably still flow into the right position!
I know you are familiar with your project, elements, voltages, and later with setup, combinations, etc .... but most of us doesn't know what you are doing 🤔🤔 .. what is that setup screen, what program, what definitions for the elementals on pcb ....😮
If you prepare that video for viewers you should explain everything slowly step by step for us to understand, another way you and we waste of time