Το Smart switch με Power metering μπορει να μπει πριν τον διακόπτη του θερμοσίφωνα και να χρησιμοποιηθεί ως χρονοδιακόπτης πατώντας το ON button που έχει;
If one wants to flash the chip inside these circuit breakers and switches (to replace the original Tuya or eWeLink firmware with Tasmota, for example): are these modules assembled with rivets or regular screws? In other words, can they be opened and closed easily and in a clean way?
@@PoseidwnTech Yes. However since then, I've read over Github and the Tasmota Supported Devices Repository that while most of these DIN Wi-Fi contactors use rivets indeed, a few of them (particularly some 2P and 4P versions) uses screws and/or clips instead. YMMV.
hi, I wanted to ask you for advice, maybe you can help me, I configured the metering on smart life and it works well it measures the current, the home assistant recognizes it as a switch and therefore does not give me the metering, do you know how I can solve it?
I see on the second breaker, there’s no neutral running up from bottom … can you use this device to start/stop just the LIVE? As I have a neutral bus and an earth bus inside the DB unit.
@@chefbob09 I did indeed. I used 2 of these wireless tuya switches to control a DB at my pool, with one breaker for the pool area. 1 breaker for garden lights and internal pool light , and a second breaker for the pool motor. It means that if I wanted to, u can set up daily or seasonal schedules - or control remotely when away. You can also use Google home assistant and control based on values like temperature, sunset etc… I also added a wireless module for my additional security lighting - ie: perimeter outside lighting. And a wireless unit for towel warmers (those bar heaters), to make the towels toasty warm in winter.
Καλησπέρα! Στην ασφάλεια με μετρητή και Wi-Fi, την μαύρη δηλαδή, πώς μπορώ να κάνω ρύθμιση: όταν καποιος πατάει το κουμπί από τον πίνακα, μετά από πχ 30 λεπτά να σβήνει αυτόματα πάντα. Σαν κανόνα.
Great Video ! Could You please post a link where you buy or get the testing board shown in the video ! Looks interesting but couldn’t find similar anywhere
Hi, Thanks for the useful video. Do you know of a related device that could monitor the power use on a different consumer unit (using a CT clamp) and if the power is over a pre-configured threshold it can control the state of a smart breaker in a separate consumer unit? Obviously both devices would be connected by the internet but maybe not on the same wifi network...
felicidadades que bien organizada está la info en tu video. me queda la duda de cómo apareció la info del sensor ( conusumo de energía) al verlos en HA? hiciste algún paso especial? hay forma de entrar en contacto contigo, tengo algunos circuit breakers con tuya que me gustaría tener esa lectura de consumo de los mismos. gracias
I know you might not have expected this comment but... You're Greek, aren't you? XD I believe as a Greek myself, I can tell from your accent 🤣 (which is by no means a bad accent, but still not quite American, English or Australian)
A bit misinforming video. On my model "tuya TO-Q-SY1-JWT" you have to press ON button for 5+ seconds before blue light starts flashing (pairing mode). In your video pairing was started automatically. And stupid tuya cannot even write plain English instruction how to properly setup device! I eventually found info about "press and hold button" 🤦
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
hi, if I program the switching on/off in case of no internet, does the switch still carry out the set commands?
can the scheduled on and off time still work even when the device is not connected to wifi? provided it was already configured with the desired time.
Το Smart switch με Power metering μπορει να μπει πριν τον διακόπτη του θερμοσίφωνα και να χρησιμοποιηθεί ως χρονοδιακόπτης πατώντας το ON button που έχει;
Hello
I have a power of 40A to pass to go from one source to another (source inverter) is this possible?
Hello,i tried to wire this switch and when i stopped the switch my mainly switch goind down
CAN I PLACE THE CIRCUIT BREAKER AS THE MAIN HOUSE breaker?
What happens with the button-models, when there's power comes back on after an outage?
Can we add the smart circuit breaker to more than one Mobil phone?
Is it possible to use the device without a ZigBee gateway?
Thank you so much for this detailed review
My pleasure 😊
Can it used as energy monitor if connected to main circuit breaker?
If one wants to flash the chip inside these circuit breakers and switches (to replace the original Tuya or eWeLink firmware with Tasmota, for example): are these modules assembled with rivets or regular screws? In other words, can they be opened and closed easily and in a clean way?
These circuit breakers use rivets so it is not so easy to flash them.
@@PoseidwnTech Yes. However since then, I've read over Github and the Tasmota Supported Devices Repository that while most of these DIN Wi-Fi contactors use rivets indeed, a few of them (particularly some 2P and 4P versions) uses screws and/or clips instead. YMMV.
Does the device reconnect automatically with the Wi-Fi if the Wi-Fi restarts for any reason?
hi, I wanted to ask you for advice, maybe you can help me, I configured the metering on smart life and it works well it measures the current, the home assistant recognizes it as a switch and therefore does not give me the metering, do you know how I can solve it?
Hallo, kann das Gerät in in zwei Richtungen zählen?
I see on the second breaker, there’s no neutral running up from bottom … can you use this device to start/stop just the LIVE? As I have a neutral bus and an earth bus inside the DB unit.
Did you ever come right with this?
@@chefbob09 I did indeed. I used 2 of these wireless tuya switches to control a DB at my pool, with one breaker for the pool area. 1 breaker for garden lights and internal pool light , and a second breaker for the pool motor.
It means that if I wanted to, u can set up daily or seasonal schedules - or control remotely when away. You can also use Google home assistant and control based on values like temperature, sunset etc…
I also added a wireless module for my additional security lighting - ie: perimeter outside lighting. And a wireless unit for towel warmers (those bar heaters), to make the towels toasty warm in winter.
Hi, I got my main switches MCB and circuit breakers are RCCB and RCBO. Can I use the above for these all with corrdct amps?
Do these meet EU regulations?
Καλησπέρα! Στην ασφάλεια με μετρητή και Wi-Fi, την μαύρη δηλαδή, πώς μπορώ να κάνω ρύθμιση: όταν καποιος πατάει το κουμπί από τον πίνακα, μετά από πχ 30 λεπτά να σβήνει αυτόματα πάντα. Σαν κανόνα.
Great Video ! Could
You please post a link where you buy or get the testing board shown in the video ! Looks interesting but couldn’t find similar anywhere
Hi, Thanks for the useful video.
Do you know of a related device that could monitor the power use on a different consumer unit (using a CT clamp) and if the power is over a pre-configured threshold it can control the state of a smart breaker in a separate consumer unit? Obviously both devices would be connected by the internet but maybe not on the same wifi network...
Do you have to pay a subscription to get the consumption monitoring
They have "guest mode", which shows all numbers for free (even w/o sign up). Not sure how long it will work.
Tuya on Home Assistant need a cloud? or can work offline?
Tuya integration requires cloud but you can always use the local Tuya integration from HACS which does not.
How safe are these Chinese electrical devices
Not very.
compared to? brand name devices which are probably coming out of the same factory?
felicidadades que bien organizada está la info en tu video. me queda la duda de cómo apareció la info del sensor ( conusumo de energía) al verlos en HA? hiciste algún paso especial? hay forma de entrar en contacto contigo, tengo algunos circuit breakers con tuya que me gustaría tener esa lectura de consumo de los mismos. gracias
En general cuando tienes la integración de Tuya 3n home assistant aparecen solos los nuevos dispositivos, no hay que hacer nada.
You can download energy consumption information
Smart MCB can’t be used at home since is curve C not curve B!
Thanks.
I know you might not have expected this comment but... You're Greek, aren't you? XD
I believe as a Greek myself, I can tell from your accent 🤣 (which is by no means a bad accent, but still not quite American, English or Australian)
A bit misinforming video. On my model "tuya TO-Q-SY1-JWT" you have to press ON button for 5+ seconds before blue light starts flashing (pairing mode). In your video pairing was started automatically. And stupid tuya cannot even write plain English instruction how to properly setup device! I eventually found info about "press and hold button" 🤦
This would be good in English