How do you change the settings in individual maps other than map 6? I've watched a ton of your videos and appreciate your information on the jb4, they're not as good with any of their explanations....
Super easy go to settings, view tuning, user adjustment every change you make here will carry over to every map with the exception of boost that only carries to map 6. At the bottom you can press save configuration and that's saving your custom map which you can save numerous. I had a custom 93 map, custom e30 map, custom e50 map, and more.
Are you still recommending the JB4 over the Cobb Access Port? I see you’ve more recently gone to pro tune. I have a 22 WRX with the Perrin intake and muffler delete axle back exhaust and I’d like to now do a tune but I’m conflicted on which one to go with. Also I only have access to 91 gas. Curious about your thoughts on which tune would be best for my set up, thanks!
@@DylanVBWRX thanks man. Out of the box will both provide a map that will work with my setup? I keep reading that map 1 (of JB4 at least) is designed for stock intake.
@@DylanVBWRX Knowing my goal is to stay real mild and not do a bunch more mods would you recommend the JB4 or the Cobb? I like the Cobb for the plug and play, I like the JB4 since I can remove it for warranty work since I’m not going real spicy.
burgertuning.com/collections/subaru/products/subaru-wrx-intake?rfsn=6842842.db266a use my link to purchase your intake and I'll hook you up with custom tuning when you get it
@@DylanVBWRXHey, Dylan. I commented on another one of your videos that I’m ordering the JB4(through your link), and an AEM intake(I can’t find my comment). Well, they have both arrived, and planning on installing them tomorrow morning. How do I find your email to get your assistance on making the proper MAP adjustments for the Intake. I’ll also be running 93 Octane, since corn fuel isn’t available where I live. Thanks, man!!
Im getting my burger cold air intake in a few days a long with an axle back. Am I good to run map 4 & 5 with E40 fuel using these bolt ons? I've read from forums that it should be okay
burgertuning.com/collections/subaru/products/subaru-wrx-intake?rfsn=6842842.db266a Use my link it helps the channel I'll help revise your maps and make map 5 work for your car!
@@DylanVBWRX told my father to use your link so i hope he did lol. its for my bday. If he didn't, is there anyway i can email burger motorsports and let them know you influenced my decision on getting this intake?
Is there an ability to change predefined maps 1 - 3 or just only Map 6 can be adjusted ? I would like to have 3 different custom maps for different conditions
burgertuning.com/collections/subaru/products/jb4-tuner-for-subaru-wrx?rfsn=6842842.db266a Get the only tuner for the CVT HERE burgertuning.com/collections/subaru/products/subaru-wrx-intake?rfsn=6842842.db266a get the best sounding intake
burgertuning.com/collections/subaru/products/jb4-tuner-for-subaru-wrx?rfsn=6842842.db266a when you get yours hmu we can see if we can make you a custom map for mo powaaaa
Love my map for the cvt 19psi is perfect for a peak it’s how the car should have came
Gonna hook my jb4 up to my cvt wrx tomorrow, gonna run MAP 1 or 2 w/ a ETS intake. Quite excited!!
How do you change the settings in individual maps other than map 6? I've watched a ton of your videos and appreciate your information on the jb4, they're not as good with any of their explanations....
Super easy go to settings, view tuning, user adjustment every change you make here will carry over to every map with the exception of boost that only carries to map 6. At the bottom you can press save configuration and that's saving your custom map which you can save numerous. I had a custom 93 map, custom e30 map, custom e50 map, and more.
Are you still recommending the JB4 over the Cobb Access Port? I see you’ve more recently gone to pro tune. I have a 22 WRX with the Perrin intake and muffler delete axle back exhaust and I’d like to now do a tune but I’m conflicted on which one to go with. Also I only have access to 91 gas. Curious about your thoughts on which tune would be best for my set up, thanks!
Both options are great it's personal preference, you will accomplish power gain and more afr safety with both
@@DylanVBWRX thanks man. Out of the box will both provide a map that will work with my setup? I keep reading that map 1 (of JB4 at least) is designed for stock intake.
@@bryansnell it can be used with any set up if you add an intake you just change fuel open loop setting
@@DylanVBWRX Knowing my goal is to stay real mild and not do a bunch more mods would you recommend the JB4 or the Cobb? I like the Cobb for the plug and play, I like the JB4 since I can remove it for warranty work since I’m not going real spicy.
@@bryansnell knowing that I’d say jb4 if you’re attempting to maintain warranty
I'm intending to install BMS air intake + ETS J pipe. Am I able to run map 2 safely. Or run map 3 or 4 without E40 fuel?
Yea with a little help from me you should be able to ? Have you already ordered your intake and J Pipe?
burgertuning.com/collections/subaru/products/subaru-wrx-intake?rfsn=6842842.db266a use my link to purchase your intake and I'll hook you up with custom tuning when you get it
Sure I will bro.
@@DylanVBWRXHey, Dylan. I commented on another one of your videos that I’m ordering the JB4(through your link), and an AEM intake(I can’t find my comment).
Well, they have both arrived, and planning on installing them tomorrow morning.
How do I find your email to get your assistance on making the proper MAP adjustments for the Intake. I’ll also be running 93 Octane, since corn fuel isn’t available where I live. Thanks, man!!
Im getting my burger cold air intake in a few days a long with an axle back. Am I good to run map 4 & 5 with E40 fuel using these bolt ons? I've read from forums that it should be okay
burgertuning.com/collections/subaru/products/subaru-wrx-intake?rfsn=6842842.db266a
Use my link it helps the channel I'll help revise your maps and make map 5 work for your car!
@@DylanVBWRX told my father to use your link so i hope he did lol. its for my bday. If he didn't, is there anyway i can email burger motorsports and let them know you influenced my decision on getting this intake?
@@bryceb3796 I appreciate it! If I don't get credit that's ok I'm just happy I was able to help and happy bday
@@DylanVBWRX I will email them anyways. Thank you
Is there an ability to change predefined maps 1 - 3 or just only Map 6 can be adjusted ? I would like to have 3 different custom maps for different conditions
You can adjust anything on any map you can also have unlimited custom maps. I had a ethanol custom map and 93 custom map
@@DylanVBWRX Sounds great. Should get my JB4 this weekend. Your advices are so helpful.
burgertuning.com/collections/subaru/products/jb4-tuner-for-subaru-wrx?rfsn=6842842.db266a Get the only tuner for the CVT HERE
burgertuning.com/collections/subaru/products/subaru-wrx-intake?rfsn=6842842.db266a get the best sounding intake
Running on 93 with BMS cold air intake so map 3?
Map 2 30 fuel open loop check out the afr if it's super safe run map 3
Also feel free to shoot me an email 📨
So am I able to run MAP 1 with a cvt, and just a cold air intake as the only engine mod?
burgertuning.com/collections/subaru/products/jb4-tuner-for-subaru-wrx?rfsn=6842842.db266a when you get yours hmu we can see if we can make you a custom map for mo powaaaa
@@DylanVBWRX, quick question should I get the wireless kit or the $40 cable? Is this compatible with iphone?
@@awesomedude65 wireless is with your phone cable is for PC wireless is better for sho, but both work great
@@DylanVBWRX so I just ordered the BMS intake, next purchase will be the JB4 I’ll hit you up for sure cause I never used one of these before.
@@awesomedude65 HECK YA BROTHER ENJOY!