I'm very impressed with your fabrication skills... your welds look great too, but In my opinion the ability to fabricate something and keep it completely square/level/plum is a much more impressive and rare skill to have. Its just second nature to you
Mate fantastic video and great fabrication and welding skills. Loved the narration of how it’s all done love the fact you explain it all as your doing it it’s what makes your channel so great 👍👍👍
Much respect from a UA Pipefitter and Pipewelder. I enjoyed watching what I love to do. Come join us buddy here in the states! The UA always needs good craftsman.
Great vid. again. Thanks for the settings, I'm learning such a lot from you. especially about metal movement when heat applied. Your commentary is top notch, hope your ear infection gets better soon, not pleasant. Cheers.
CALVIN, Look into getting one of the very tapered nozzles for your gun to get into really tight areas.....if they are available. hope this helps , Paul
Hey brother, add German subtitles to your videos. I like to look at them, but I don't understand what you're saying because I don't speak English. I'm doing my master's degree and would like to become self-employed in plant construction and pipeline construction soon. I think your videos are great.
How much time did you need to do this spool? What is the error tolerance on the length and rotation of the holes on the flange? Is the final measurement performed optoelectronic? 💪👍👊
So wish I finished my apprenticeship making oxygen and nitrogen processing plants , working with Philippinos who were gun welders (special class) do U do much tig
Great content ,, as usual. And many thanks for taking the time to make the video content you do , as this must slow you down a lot , and getting paid per weld , its costing you cash ,,, with luck the you tube subs will make up the difference , and maybe in time overtake the loss in revenue.
Hi Calvin, I'm not so great with internet stuff so couldn't figure out how to message you directly. Judging from your accent I'm going with west essex/east london, but could be wrong. I'm a stick welder in the gas industry working in herfordshire and do a fair bit of prefab as well as on site work. Fancy a collaboration?
You mentioned you use pulse mig.. Aint the process you using on that fronius PCS mig? which is a spray and pulse combined? thats just what the arc looks like when you did your cap?
I weld in the field and in the fab shop and let me tell you a lot more skill goes into setting up when your in the fab shop fair enough its difficult welding upside down getting sparks down your ears but you wouldn't fabricate crucial parts in the field just your tie ins
Look into applying to your local union as a steamfitter/pipefitter or welding apprentice. Or try talking to and applying to local mechanical contractors.
@@николайставрогин-к8нз одного боку, втратили можливість напасти зненацька, з іншого, так напевно було задумано. Основне - кількість військових і техніки постійно збільшується, що саме по собі, в більшій мірі, говорить про підготовку до наступу в майбутньому. Хоча, переконую себе, що це тільки перевірка міцності "яєць" України, ЄС та США. А ти як вважаєш?
@@николайставрогин-к8н не, в России они строили кислородные станции. В Волгограде, и в Нижнем Тагиле, на Урал вагон заводе. Там где выпускают танки армада, в том числе. Свою кислородную станцию законсервировали,так как она энергонеэфективна, и стара, да и работало на ней больше персонала, чем на этой новой, управляемой из за бугра.
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
I love the fact you focus on the fab, it really helps a lot
I'm very impressed with your fabrication skills... your welds look great too, but In my opinion the ability to fabricate something and keep it completely square/level/plum is a much more impressive and rare skill to have. Its just second nature to you
Awesome video calvin, the way you explain your process for doing everything in such a detailed way is very interesting and informative
Thanks bro
The flange rock and tack tip is a gem ,,,
Welding: Definition, Processes, and Types of Welds www.engineeringchoice.com/what-is-welding-and-its-types/
Mate fantastic video and great fabrication and welding skills. Loved the narration of how it’s all done love the fact you explain it all as your doing it it’s what makes your channel so great 👍👍👍
Easy one of the best pipe fabricators to watch on RUclips
Much respect from a UA Pipefitter and Pipewelder. I enjoyed watching what I love to do. Come join us buddy here in the states! The UA always needs good craftsman.
a very talented craftsman displaying his excellent skills.
very impressive work
Great vid. again. Thanks for the settings, I'm learning such a lot from you. especially about metal movement when heat applied. Your commentary is top notch, hope your ear infection gets better soon, not pleasant. Cheers.
wow....122,263 view in 7 days, Calvin you are really rocking....cheers from USA
U filled the GAP perfectly!🔥
Quality is outstanding. Nice work
I followed your videos very well, I liked your style, precise
You're like the best welder I know
Thanks man
Great video and I definitely learn something every time. Love watching your videos
I love to weld, I was a production mig welder for 20yrs plus
My work is strictly gas pipe (mains) only so always class II or fighter depending on job spec
So beautiful and professional work Bro, I like the way you weld.
Thanks man
@@ARCONEWELDING Привет возьми меня на работу
fantastic vid bud quality work! i miss doing pipe some days
Do you mean "smoking" or "laying" pipe? Ha Ha just messing with ya!
Definitely informative mate, keep it up 👍🏻
Thank you for the video.
Excellent welding know-how.
Looks amazing great video im in welding school
CALVIN, Look into getting one of the very tapered nozzles for your gun to get into really tight areas.....if they are available. hope this helps , Paul
When I was doing pipe work it was all don with stick did not know you could do it with mig welding what's the piping for.
Another great video
Шикарная работа!!!
You do well it’s been a while hope you get to feeling better
Thanks dude
Another awesome vid by you, thank you !
Would be great if someone would sell the Fronius equipment here in Alaska.
Awesome video mate, how do you like your adflo harness?
I love your welding .
Cool work 👍!
Great work man
Hey brother, add German subtitles to your videos. I like to look at them, but I don't understand what you're saying because I don't speak English. I'm doing my master's degree and would like to become self-employed in plant construction and pipeline construction soon. I think your videos are great.
Gotta love that high speed pulse welding.
What's your hourly, bro?
😳
How much time did you need to do this spool?
What is the error tolerance on the length and rotation of the holes on the flange? Is the final measurement performed optoelectronic?
💪👍👊
Its 3mm+- for the length and along as the bolt holes are in the middle of the level lines
Отличная работа !
Sir you are a grate teacther this vidio helpefull us for all
Hi , what is the setting of your welding machine your are using here ?
great job!!!👍
What size holes are in the flanges you fit? Great videos
What land (if any) and gap do you do on these bevels for the root?
No landing and 3mm gap
what parameters do you use when welding the second time?
Amazing job..👍👍👍🇵🇭🇵🇭🇵🇭
Mint Video bro 🤙
So wish I finished my apprenticeship making oxygen and nitrogen processing plants , working with Philippinos who were gun welders (special class) do U do much tig
Gosto muito de caldeiraria e tubulação industrial show de bola
Great job
Superbly done 😃😃😃 Thanks
Hey, can you or anyone tell where to get such an Adflo suspender? Is this a 3m gear? Improvised? I am hardly looking for one
Nice job 👍👍👍
Привет из России .. Интересно смотреть тебя)))
Great work
Great content ,, as usual. And many thanks for taking the time to make the video content you do , as this must slow you down a lot , and getting paid per weld , its costing you cash ,,, with luck the you tube subs will make up the difference , and maybe in time overtake the loss in revenue.
Yeah man thats what i hope
Super travail , ça donne envie.
Hi Calvin, I'm not so great with internet stuff so couldn't figure out how to message you directly. Judging from your accent I'm going with west essex/east london, but could be wrong. I'm a stick welder in the gas industry working in herfordshire and do a fair bit of prefab as well as on site work. Fancy a collaboration?
Hey man u got it bang on, grew up in east London, and you can dm me on Instagram
You get paid per Hr or weld diameter inch??
very interesting good work
You mentioned you use pulse mig.. Aint the process you using on that fronius PCS mig? which is a spray and pulse combined? thats just what the arc looks like when you did your cap?
Pulse mig process is a pulsed spray transfer, thats why get no spatter👍
You got one stady hand ma man you know your not the best but i think your very good keep up the goods 👌
Top quality bro
Good job 🤩
Thank you sir am NSOZI here in Uganda, what are the are some of the should I take I too aqaire some of those skills
Good job,how much do you get paid?
Thank you! So nice
Why you welding with pulse?
Nice job
One person really?
OMG.
So skill the expert.
So interesting!!!
Sir please explain elbow degree marking
Always good work 💪👏👌👍🙌
Keep on Applying Pressure 💪😌
#Covid_Season_2021
amazin work
Magnifique.
Try that in the field whole different ball game
Ok guy 😂😂😭 that’s not his job
Thats why is made on a shop , to dont make it in the field....
Honestly, wtf does that even mean you twat. “Oh I’m a tough guy, I weld in the field heheheh” like just about every other god damn welder out there
I weld in the field and in the fab shop and let me tell you a lot more skill goes into setting up when your in the fab shop fair enough its difficult welding upside down getting sparks down your ears but you wouldn't fabricate crucial parts in the field just your tie ins
We know that you loud mouth why would fabricate "in the field " when you you can do it in the workshop. You must be a septic?
My age is 19, and i want learn about welding, can you help from Big Zero
How to measure the length 45°
Just a heads up there are other channels and tiktok videos ripping off your work.
Oh isit do you know?
@@ARCONEWELDING ruclips.net/video/TiXWtMRl84U/видео.html
Спасибо вам 🛠🛠🛠👍
Do you tig as well Calvin?
Yeah dude, ive got a few tig videos on my channel
What was the total time it took you to do that?
About 2.5hrs
Brilliant
Will someone know where I can find this type of job?
Look into applying to your local union as a steamfitter/pipefitter or welding apprentice. Or try talking to and applying to local mechanical contractors.
Yr good wark👍👍👍
Cool😎
Bro just remember even tho you tacked this and that, where ever you weld it’s all going to pull all over.
Good videos tutorial next time boss ferfec the best videos you welding work steel
Wher are u from are u from Uk 🇬🇧 West Yorkshire ?? Ur accent look like it
I’d lose sleep fabricating like that
dang 25mm of missed edge... I miss a tie-in and its a failed xray b31.3 in alberta boiler code lol
Yeah man that's class 2 for you
@@ARCONEWELDING Keep up the good work man, i'm just an alloy welder. I can't fit anywhere near your skills
شغل مرتب
Your fabiracation verey telent
Гарна та цікава робота. Вітання з України!
На зв'язку
у вас там на Украине война опять начинается что ли?
@@николайставрогин-к8н явної поки що немає але все дуже напружено
@@bohdan9939и как ты думаешь, начнётся или просто рейтинг себе кто то поднимает?
@@николайставрогин-к8нз одного боку, втратили можливість напасти зненацька, з іншого, так напевно було задумано. Основне - кількість військових і техніки постійно збільшується, що саме по собі, в більшій мірі, говорить про підготовку до наступу в майбутньому. Хоча, переконую себе, що це тільки перевірка міцності "яєць" України, ЄС та США. А ти як вважаєш?
Круто!
Get it welded going to distort
Работал я на вашу компанию - Проксаир, оштрафовали бы, если б я работал шлифмашинкой одной рукой.
на какую ты компанию работал,в англии что ли?
@@николайставрогин-к8н проксаир - американская контора. Поговаривают, всемирно известная.
Технические газы. Кислородные станции по миру строят.
@@TheFrolow акцент у этого негра не американский, а английский...думал в англии
@@николайставрогин-к8н не, в России они строили кислородные станции. В Волгограде, и в Нижнем Тагиле, на Урал вагон заводе. Там где выпускают танки армада, в том числе.
Свою кислородную станцию законсервировали,так как она энергонеэфективна, и стара, да и работало на ней больше персонала, чем на этой новой, управляемой из за бугра.
@@TheFrolow а зарплаты и условия труда европейские были??? или по путински, на коленках абы как, за 2000 в день?
Кромка была зачищена а вот за отчизну обидно сварочные аппараты китайские
Very interesting, but nothing is clear)
19:53 это вы прям по краске варите?
Как то не профессионально. Или это у вас, нормально?
Оно тебе надо,иди снег чисти.
😳🇹🇷
Nice job