P7100 install Part 3 Continued (She Runs)

Поделиться
HTML-код
  • Опубликовано: 29 ноя 2024
  • Finally getting the Dt360 running with the P7100 pump!

Комментарии • 26

  • @geriatricginger
    @geriatricginger 2 года назад

    I use a dab of grease to hold the seal onto the nozzle. Badass project.

    • @gingerauto
      @gingerauto  2 года назад +1

      Will definitely do that next time

  • @Torch4ya
    @Torch4ya 2 года назад +2

    Needs a detroit 6L71 😆

    • @gingerauto
      @gingerauto  2 года назад

      Naah

    • @Glibzer
      @Glibzer 2 года назад

      @@gingerauto more like a 4-53 t silver

  • @wbball15
    @wbball15 2 года назад +2

    Really enjoying this project

    • @gingerauto
      @gingerauto  2 года назад

      It’s been a fun one to build.

  • @agoodneighborautorepair2176
    @agoodneighborautorepair2176 2 года назад +2

    Hi,very nice explanation ,silicone can help ,but can cause many issues, blessings..

    • @gingerauto
      @gingerauto  2 года назад +1

      Learned our lesson there!

  • @PaintPatina
    @PaintPatina 2 года назад

    see if you guys can find high tack spray-a-gasket to hold those crush washers on while you're installing them instead of using silicone.

    • @gingerauto
      @gingerauto  2 года назад

      Will try that next time!

  • @PeterHatch-mx7zc
    @PeterHatch-mx7zc Год назад

    The 5.9 cummins has a pin under pump to keep engine on TDC any way great videos where do I go to buy adapter for p_pump to this engine please re little grease on washer dont use Silicon

  • @joshhance5733
    @joshhance5733 2 года назад +1

    Sweet! And atleast yall only have to pull the injector and not the pump again.

    • @gingerauto
      @gingerauto  2 года назад

      My heart sank at first when I thought we had to pull the pump. But we good !

  • @privilegednpc
    @privilegednpc 2 года назад +1

    Could just be that the thickness of the silicone is interfering with the seal..

    • @gingerauto
      @gingerauto  2 года назад

      That was a big part of it!

  • @blakenissan07
    @blakenissan07 2 года назад

    What frame is that original? How you get them wheels on that truck? Factory axles?

    • @gingerauto
      @gingerauto  2 года назад

      It’s still the original frame. And the axles are off an 04 f650.

  • @blakenissan07
    @blakenissan07 2 года назад

    Did you do a cab swap or is that the original frame truck

  • @kevhouse55
    @kevhouse55 2 года назад

    Man too bad you guys don't have a cousin that lives right down the road that has installed many injectors and would gladly come and help if he was ever asked.... And next time put white grease on to hold the copper washers into place.

    • @gingerauto
      @gingerauto  2 года назад +1

      Haha if I knew I was an idiot when installing injectors, I definitely would have called. Now I know I am, so will definitely be calling next time!

  • @ChiefCabioch
    @ChiefCabioch 2 года назад

    Place looks like working in a cave, get some lighten in that place...

    • @gingerauto
      @gingerauto  2 года назад

      We have some. It’s on the list of 100 other things that needs done on the farm.

  • @TheMockUnit1
    @TheMockUnit1 2 года назад

    Thank you! I thought you gave up on the Lowstar. lol. joking. good luck on the leak.

    • @gingerauto
      @gingerauto  2 года назад +1

      Hardest part about farming is thinking you will have time when it slows down. But it never does you gotta just make time!