good day po sir...mejo matagal npo etong vids nyo...ask ko lng po kung paano nyo ikinabit ung 2 for hook support pra po mabuhat kapag nag se center stand? tnx po.
Hello po sir. Di na po yan magagamit, di ka na din dyan pwede humawak kung icecenter stand mo po. Dun ka na sa main chassis baba ng foot peg ng angkas po.
1. You should never change the elevation or height of the chassis number plate.. once madisturbed yan, yari ka sa mga fairings mo paps madidis align lahat. 2. THINK TWICE, CUT ONCE 3. Always use sub brackets and spot weld before cutting/removing the original chassis 4. Do not cut driectly straight down when using cutting disc, use the technique V Cut to achieve gradual cutting. This would ensure thay your cutting disc will not break off. (Safety purposes) So far yun lang naman paps, the rest is talent na talaga or skill sa mag weweld.quality of welding kumbaga
@@motograhe2020 Alright sir, thanks for the info. Just one more thing, yung fuses, battery, and ecu socket ito lang ba iuunplug from the bike? Or am i missing something else?
Just dismantle/disconenct the battery terminals sir especially if you are using typical welding machines, ECU i highly recommend to dismantle. Fuses not significant, as long as the battery is removed. Hope this helps sir. Let me know if you have any further questions. Ride safe brother!
Good day po sir, Magdepende din po kaseh yan sa bracket mo sir.. i suggest actual measurements ka po.. i encountered na 305mm shock nya pero atras masyado ang bracket kaya semi lowered effect pa din. Tapos, ang pag sagyad sa ubox number 1 talaga makadepende yan sa setting ng shock mo po. I tried na malambot pag may angkas tinatamaan ubox, hehe Tapos pangalawa dyan yung sukat ng shock o di kaya yung bracket
Good day sir. Cebu po ako. Ang monoshock po sir is just a plug and play kit po. No need welding. Mabibilo nyo po din yan online sir .. ang underneath ang need ng hinang po
“DARATING ANG ARAW NA TANGING ANG PANGINOON LAMANG ANG PUPURIHIN. IBABAGSAK NIYA ANG MAYAYABANG AT MGA MAPAGMATAAS.”
- ISAIAS 2:11
Ephesians 3:20- God is going to give you more than you asked for.
Colossians 2:7- Be strong in your faith.
super nice talaga sir...... ikaw jud pinaka maayu ana... team A lang malakas
Daghang salamat sir Mark! Team A lang malakas! Haha
Sir location nyo
good day po sir...mejo matagal npo etong vids nyo...ask ko lng po kung paano nyo ikinabit ung 2 for hook support pra po mabuhat kapag nag se center stand?
tnx po.
Hello po sir. Di na po yan magagamit, di ka na din dyan pwede humawak kung icecenter stand mo po. Dun ka na sa main chassis baba ng foot peg ng angkas po.
Sir, before welding ano mga dapat i-disconnect or things to be aware of?
1. You should never change the elevation or height of the chassis number plate.. once madisturbed yan, yari ka sa mga fairings mo paps madidis align lahat.
2. THINK TWICE, CUT ONCE
3. Always use sub brackets and spot weld before cutting/removing the original chassis
4. Do not cut driectly straight down when using cutting disc, use the technique V Cut to achieve gradual cutting. This would ensure thay your cutting disc will not break off. (Safety purposes)
So far yun lang naman paps, the rest is talent na talaga or skill sa mag weweld.quality of welding kumbaga
@@motograhe2020 Alright sir, thanks for the info. Just one more thing, yung fuses, battery, and ecu socket ito lang ba iuunplug from the bike? Or am i missing something else?
Just dismantle/disconenct the battery terminals sir especially if you are using typical welding machines, ECU i highly recommend to dismantle.
Fuses not significant, as long as the battery is removed.
Hope this helps sir. Let me know if you have any further questions. Ride safe brother!
Sir tanong kolang 285 mm mono shock powdi siya ikabit plug and play aerox modified hindi ba sabit u box
Good day po sir, Magdepende din po kaseh yan sa bracket mo sir.. i suggest actual measurements ka po.. i encountered na 305mm shock nya pero atras masyado ang bracket kaya semi lowered effect pa din.
Tapos, ang pag sagyad sa ubox number 1 talaga makadepende yan sa setting ng shock mo po. I tried na malambot pag may angkas tinatamaan ubox, hehe
Tapos pangalawa dyan yung sukat ng shock o di kaya yung bracket
Thanks sir advice God bless
Walang ano man paps! God bless din po..
sir ask lang pwede pa po kaya mag kabit ng givi box kung ganyan na po ung chassis? kakayanin pa kaya yon?
Good day po sir. Depende sa bracket po po sir kaseh kung bracket na mag tap doon sa shock mount for sure di na pwd po
@@motograhe2020 ah may ibat ibang klase po bang material ng bracket ng monoshock po ba sa market?
Yes po may iba ibang design ang monoshock bracket po.
Pero may nakita naman ako na naka monoshock pero may top box pa din
Sir San po kayu nKa bili Ng undertail ?
Sa ganbette evolution po
Sir.. Where is this buying underneath.... Please sir reply me..
Hi Sir! You may directly contact Ganbette Evolution in FB sir or AUFA46.ph in shopee
San mo nabili underneath mo sir?
Indonesia po sir
Direct message ka ganbette evo sir?? Hm it cost
Asa ka nkag patira ana lodi?
Kami kami ra ana po sir balay ra namo hehe
Asa inyong location sir?
Cebu po sir
Bos saan banda shop mo?
@@jhonsindao3800 wala po ako shop sir..
Hello, Paps saan ka nagpagaawa ng under tail? MAy nabibili na bang ganyan or pinagawa mo lang? Ride safe
May nabibili na paps. Sa akin is sa ganbette evolution direct from indonesia po. Tapos kami na nag install and fabricate po
Paps nag message ako sa messenger mo.
Dito sa Pinas wala bang nagbebenta ng ganyn? Matagal kasi shipping d ba?
Yes matagal talaga kung direct indonesia. Sa pinas meron ata si junshop po.
Paps ano FB ni Junshop paki na lang sir salamat 👍
Pde ba khit hindi na icut yan
Pwede pero hindi ganyan na undertail gagamitin nyo po
Saan jan boss pwde ma g pa remodel din nang aerox ko.
Cebu ako sir eh
Boss magkanu gastos Jan undernet at mono shock Ng aerox
Underneath paps nasa 10k
Mono nasa 15k po
boss san mu nabili undertail mu?
Sa ganbette evolution po sir.
nindota do oi.. congrats do..🔥
Testingan nya ni nako with angkas na do hehehehe thanks do !
Boss anung sukat sa steel plate...tnx
3 inches by 15 inches will do po. Thicknes is 5mm up
New subscriber po, sana mapansin. Pwede pa po ba sa backride pag binago na po yung chasis after maputol ng chasis nung sa bandang upuan ng backride?
Okay naman po maam.nasa episode 3 ng undertail project natin po maam.
mga boss kinsa naa baliya helmet dha ls2 or spyder brand , 2nd hand mn or brandnew
best to do ata sir is online
Sir may huli po ba sa lto kapag nag pa convert ng monoshock?
Sa mono, based on my experience wala po sir..
@@motograhe2020 thank you sir new subs here
Maraming salamat po sa tunay na suporta sir! Abangan ang new uploads natin within the week. 🤩👌 ride safe!
Sir sn puh exact Loc nyo..pwd puh b mgpgawa snyu mono shock ng Aerox puh,,,,
Good day sir. Cebu po ako. Ang monoshock po sir is just a plug and play kit po. No need welding. Mabibilo nyo po din yan online sir .. ang underneath ang need ng hinang po
Pogi ng set up ng monoshock mu tnx tnx puh sir,,,,
Maraming salamat po sir! Ride safe po..
@@motograhe2020 asa ka cebu boss
Lapu2 ra sir
Sir good day. Sir pede po b p send ng exact detail ng mga size po. At, saan k po nkabili ng tail tidy fairings. Thank you and god bless
Hello po. Just pm me sa Motograhe Fb page po
Dli na huli sa LTO boss?
Di naman sir..
Boss meron parin ba yung chasis number? At lock ng box?
Yes po sir.. meron na meron po hehehe
nice ka migz from ozamiz here
Proud ozamisnon here! Salamat migz!!
Bro dle magkaproblema ana pg taud sa ato Ubox??
Di raman bro. Hehe iset lang jud taron nga makalingkod ang ubox bro..
Boss how to order .undertail
As of now sir i don't have stocks..
Maikli lng video na pinakita mo sa huli.. Dapat lahat ng angle pinakita mo
@@samuelravis8271 ep3, and check other vids for other angles po and actual test nito sa endurance
San po nakakabili ng underneat cover?
Good day sir. Sa ganbette evolution po
Sir paano po mode of payment nyo sa ganbatte?
Western union po sir
@@motograhe2020 magkano.po underneath sir
Inabot ko nasa 10k sir
Anong mono gamit dyan?? Tnx
Sa ano sir?
Mono shock sir.. Anong brand??
Yss po sir
@@motograhe2020 pang aerox tlga n monoshock yan?? Ilang MM buh sukat??
Hindi sir..walang mono designed for aerox, all are aftermarkets..
pwede pa rin bang mag angkas dyn?
Yes po, sa episode 3 natin
patulong naman po kung san ilalagay ang relay stuck up po kase signal light ko
Buksan mo V fairing mo paps.. nasa baba ng may susi-an yan sir. kulay itim na parang box na maliit
Sir mgkno po kaya mggastos po pa underneat po salamat po
Nasa 10k po sir..
Magkano lahat nagastos mo boss
Approx nasa 10K sir. Mahal shipment graling indonesia po
hindi po ba delikado ang ganyan
sir?
As long as pulido pagka gawa sir.. oks lang i tried na din to sa endurance with backride.. so far oks naman hehehe
@@motograhe2020 sir gagawa kadin ba nang mono shock..
Boss magkano po magpa monoshock at underneath
Hi Sir for the price and amount ng mods.. you may send us private message directly sa fb page natin po. Ride safe!
@@motograhe2020 boss safe ba ang mono shock kahit may angkas
Only in Cebu ☝💯🔥🇵🇭
Thanks bai Man! 🤩
How can i buy aerox from India
If no aerox has been produced there in india. Then u have to buy it from other country sir.. that may take a long process..
Magkano kaya gastos neto boss? Lahat.x na
10km plus ata sir
Mgkno po abutin pg ngpgwa ng gnyn mod
Nasa 7k to 10k sir..
Idol magkano magpa ganyan?
Good day sir. Pa PM nalang sa motograhe page natin po sir.para sa mga amount nito po hehe
idol, unsay name sa inyong page?
Motograhe po
Gk rapi potongannya, not good
Well it depends on what type of steel bar you will be using and how you weld it.. 😊