Installation-Free Button Badge Maker Machine 58mm (2¼ in) DIY Pin Button Maker Badge Punch Press
HTML-код
- Опубликовано: 22 янв 2022
- Installation-Free Button Badge Maker Machine 58mm (2¼ in) DIY Pin Button Maker Press Machine Badge Punch Press with Free 100pcs Button Parts&Pictures&Circle Cutter& Magic Book (Green)
Хобби
Thank you. The instructions provided were poorly translated with pictures that didn't match the process and the sample button was different than the actual buttons needed lol.
The pin back always comes out side ways so frustrating I have this exact machine
Mine too! I adjust on the next one and it's even more side ways. Can't get a straight one at all!
Same here guys, I've adjusted it several times and it would be straight but I forget how I did it until I manage to get it again
I'll have to mark where I adjusted it to get it straight
Edit: I turned everything sideways and made sure the coil is on the right side. Also, I use the 32mm buttons
I just noticed when do part A then swivel part B, the bar thingy MOVES part C where part A is stuck in...I've also marked and arrow under the metal plate to see where it moved. So adjust B and mark it
Better if use marking
I have a button badge machine. Unfortunately I don’t know what is the size of finished badge . How do I measure the size of the picture that I should use that will fit my machine?
You should have a paper cutter that is included by every Maschine on there you can see the size
hi most likely getting this but I was jw if this can make smaller buttons as well or only for that specific size
hi i have this badge maker, it’s made badges perfectly with my small & medium size badges but i haven’t been able to make a big badge yet (5.8mm)
when cramping with Die A (the badge, paper & plastic) it never catches up into the upper machine to then attach to the badge back. I am so confused why because I do nothing different than with the smaller sizes 😩 is there anything to suggest?
thank you for being so quick and simple but what size should my buttons be? my button maker is the same size but should I leave some room? like would making them 3 inches be too much or should I do the exact size?
silly me, the kit had the size for me ready to go.
Thank you!
you are always welcome
Thank you so much
Will the Quaff mold fit this? I can't use my mirror badge keychains because this does not have the hole for the keychain.
is it ok if the badge that i put is not the same size with 58mm
Can you use metal backings too, with this machine. Or just plastic pin backs?
I was just gonna ask this question too
it can use metal backings or plastic pin backs.
Which type of paper did you use?
What is the exact size of the of the paper circle needed for the 1.25 mold? Mine are always too small!
and how do you keep the image straight?
Is it only button pins or can you make magnet buttons?
Mine didn’t come with protective film or whatever
for some reason my paper, film, and clip all don't sticker to each other. Please help
Same
Where did you get this machine? I want to get one too.
send mail to maggie@auplex.com
Can we change the mold of this ?
yes, we can change the mold , it has 25mm,32mm,37mm,44cm,58mm different size. one machine can switch to different size mold for different badge.
@@auplexheatpress where do we find the molds?
What paper is recommended?
A4 or A3 Badge Photographic Paper.
@@auplexheatpresswould A bit thicker paper also work well?
@@atngaming2019I don't think so, I got one a little bit thicker and my machine is now stuck :(
Doesn't work, my pins are never together
Same me and my dad are trying to figure it out
We figure it out all we did was trying to get the paper, the exact size as the clear plastic.
Hi 👋
Hi,My Dear Friend, welcome to visit Auplexheatpress