WIRING BOAT GAUGES - Yamaha Outboard Faria Gauge Package
HTML-код
- Опубликовано: 27 июл 2022
- DON'T BE AFRAID TO WIRE YOUR OWN GAUGES! We're breaking down the basics of what's happening behind the dash on your console with your gauge wiring. It's not so scary once you understand how gauges are powered and supplied signal. These gauges are Faria brand, and their Chesapeake line. I've had great luck with installing them on lots and lots of boats (even my own!).
Faria Tachometer Pole Setting Chart Link:
fariabeede.com/site_manuals/I...
Our boat wiring connector kits are now available here:
tomstoons.com/products/marine...
Pontoon Stuff Discounts
5% Off Discount Code at Checkout: TOMS5OFF
Link: www.PontoonStuff.com/tomstoons
YesWelder Discounts
10% Discount Code at Checkout: TOMSTOONS
Link: yeswelder.com/?ref=kyy2ncka
BRUNT Workwear Discounts
$10 Discount Code at Checkout: TOMSTOONS10
Link: www.bruntworkwear.com/tomstoons10
Atwood Rope & Docklines
10% Discount Code at Checkout: TOMSTOONS
Link: www.atwoodrope.com/tomstoons
Say Thanks by Contributing Financially to Tom’s Toons Channel
Link: www.buymeacoffee.com/tomstoons
Search Keywords: Boat Gauge, Boat Gauges, Pontoon Dash, Pontoon Console, Pontoon Gauges, Pontoon Stuff Gauges, Faria Gauges, Pontoon Electrical, Boat Electrical, Outboard Controls, Outboard Motor, Outboard Motor Rigging, Outboard Motor Shift and Throttle, Outboard Motor Ignition Harness, Pontoon Restoration, Pontoon Refurbishing, Pontoon Fixer Upper, Boat Restoration, Pontoon Stuff, DIY Pontoon, DIY Outboard. 
Хобби
Great video, exactly what I was looking for. I'm working on replacing all my gauges and the wiring was pretty intimidating. Your explanation makes it easy to understand! Thank you!
Thanks for watching! We’re here to break things down so that all DIY folks can tackle these projects at home without being afraid of the task. Happy it helped you out!
I am rebuilding a Lyman and this was a perfect explanation for how to put in the instruments. Thank you.
What a cool project!! I’m so glad it helped you, we’re always hoping our videos can be applied well beyond the Pontoon world!
Great info, just what I needed. Thanks!
Great! Thanks for watching!
THANK YOU for the simple explanation!
A big help! 👍
I’m happy to help out!!! Thanks for watching
Wow, idk why I was so scared to try and tackle this myself, ALOT easier than it looks! Thank you so much for this, plain simple and to the point! 👏 bravo
It’s straight forward once you understand the posts on the gauges, the colors of the wires, and where the gauges will get power, ground, and signal from!!
I do have dual helm stations, 1 upstairs outside and one Below in the cabin...how do I run this x2 tied up together?
@@brod12313 I’ve never installed a dual helm setup. I would reach out to a local dealer or service center used to dealing with dual helms and ask them. I’m not sure if you can just piggy back off the signal wires or not. I’ll do a little research and see if I can find out more.
@@tomspontoons yeah, I was thinking I could piggyback everything too, but I also thought gauges were complicated and hard to mess with too lol then I saw ur awesome video 👌 thanks again
@@brod12313 not too complicated, just don’t know if the signal wire will have issues with accuracy jumping it across.
Great video, as always! Much appreciated!
Thank you! And thanks for watching!!
Another great informational video Tom ,,thank,s for your help ,,, you the man .
Happy to help!! Thanks for watching!
Man... I just saw your amazon link....
Wish I saw it before... I purchased many similar items while doing my refurbish.
I will get you next one... I have another one I may tackle in the next year.
All good! I don't do much with growing my Amazon Affiliate Store like I probably should. I'm just glad you're watching my channel, so thank you!
Thanks for the help!
Glad it was helpful!! That’s what I’m here for!
I love your vids, thank you!
You’re too kind! Thank you for watching the channel!
Hi Tom, as usual a well informed, well delivered presentation thanks mate😁🌟🌈🇦🇺
Thanks so much! And thanks for watching!
Just what the lame-o ordered. I feel like I can do this now! Thanks Tom.
You’ve got this!! Let me know if you have questions when you tackle your gauges!
looks good. Will this boat have running lights? Would it be better to tie the back light into running light switch?
@@BoondockingCajunstyle Great question! It does have running/navigation lights. I’ve seen gauge backlights wired both ways, even from the factory. I was always taught to wire them into the key switch, that way they’re on when they’re needed…when the engine is running. No wrong way to do it as long as you can see them at night!!
Great video - thank you! Two questions: Is there some basis for deciding which gauge to start with to receive power directly from the ignition? Is there a reason why the power is jumped from the tach to the speedometer and ends there, whereas there is a second jumper from the tach. to the volt-meter, which is jumped to the fuel gauge?
That picture really helped
Great!! We will try to always include that stuff in our videos to help that at home folks!
Thanks Tom your video really helped. Did you have to use the Yamaha AGI to get these gauges to work or were the connections taken from the bus wires?
There’s a lead for gauges worked into the 10 pin main harness for the engine that runs from the motor to the key switch, shift/throttle, and under-dash accessories. I wired this to be spliced into that portion of the main harness. Ultimately, the colors will match up to the gauge leads for power and signals. Let me know if that makes sense.
Great video, as a fellow RUclipsr, your presentation and information was complete and well done! Really helped me in my replacement of gauges on our boat!
Thank you so much! I learn all sorts of stuff from other channels that provide great information and detail, so I definitely want to provide something similar. Thanks for watching!
I have a 2006 Yamaha 90 2 stroke and the gauges were replaced but not the harness. This video is great at explaining the mess that's under the dash!!! On mine I see two small fuses on the yellow wires but did not see them on your wiring. did you put fuses in and if you did where?
Thanks a milllion!
Usually the only fuses run for gauges will be for a depth gauge or fish finder powered off the key on power. That’s the only time I’ve encountered fuses on a gauge panel. Otherwise outboard associated fuses are on the engine.
The seperate like 2 ro 4 wire harnes that says gauges at 1 end and to engine on the other end where does that go and the pigtails on the 703 yamaha control the up and down tilt where do they go from the 703 control
I'm not exactly sure what wires you're referring to. The trim and tilt wires should be integrated into the 10 pin ignition harness that goes from the control box and plugs into the engine. We have a full video of installing a 703 control box on our channel that might help answer some questions!
Where Can I find a wiring diagram for a Robalo R160? Has a Yamaha F70LA OB
Would like to install a couple voltage gauges. One for each set of batteries. Your
expertise is greatly appreciated.
I’m far from an expert on that style of boat. I’d check with a Robalo dealer for contact them directly to figure out where those sets of batteries come into the console. Otherwise you could pull wire from each battery to hardwire a gauge set in off of a switch for each battery set.
Do you need any special type of wiring (like a marine wire)? or can i use regular like trailer wire 14awg?
I try to use marine grade whenever possible…copper tinned coated wire. Anything else may just not last as long before corrosion sets in. However, if it’s protected from chaffing and is sealed up at connections it should last a long time even if you used trailer wire!!
Where do you get fuel tank kits? How would you wire two tanks to a gauge?
I use Moeller brand tanks whenever installing new on a boat. I'm not sure how or if you can wire two tanks to a single gauge. I'm sure there are gauges with two read-outs on one gauge face so you'd connect each tank's ground and sending wire to be able to get a reading for both tanks. Otherwise we've done one boat where we wired in two separate gauges to allow for two tanks.
What's wrong if I'm getting no signal on my Yamaha
Did you have a tach that was working but now quit? Or wiring in a new one from scratch?
What do you hook your ground wire to. The boat?
Never ground to the frame of the boat. The ground needs to make its way back to the negative post of the battery whether it’s through a ground buss bar, a common negative lead at the helm, or the motor ignition harness. With gauges, you’re wiring through the ignition harness, so using the ground that’s included in that bundle of wires is the best option.
@@tomspontoons thank you for the info. This Yamaha control box has a lot of different color wires in it. Very confusing looking at it being can’t find much info on what wires are what
@@sheabourne9428 There are some Outboard Ignition Harness Wiring charts out there which tell you what colors do what. I think I've shown the one I use in some videos where you can pause it and screen shot it to get what you need from it.
I'm getting no tachometer signal
Double check that the green wire (tach signal wire) is attached at the gauge as well as where it’s attached to the ignition harness. Sometimes connections can come loose or corrode. Then double check that you’re getting power to the gauge from the yellow wire (key on power) and that the ground is connected.
Beyond that I’d wonder if the gauge quit working and needs to be replaced.