QUICK TIP: if you want the 260 heart to look complete, add a scrap 260 pinch twist right under that top 350 pinch twist, forming the "point' on the heart's bottom.
+Ask Me For A Balloon thank you! I am thinking of doing a linework version as well. we both have been busy and not mentioning eachother's channels, but we both make so many freakin vids that we can sort it out over the next week or so, as you will be heavily mentioned in the upcoming décor vids.
+Balloon Sage - Did you see my koala design? You're usually one of the first to comment, but not this time. My views have been unusually low on it… I suspect RUclips maybe didn't notify my subscribers.
Hi! I’m sorry, but I made this video quite a while ago and would have to watch it again to even learn how to make the entire design. You are right - the other is better, and I think I taught the second version because it was more stable. I will make you a deal, though. If you reply to this comment I will personally relearn this design and then figure out the top that you want. I will then type up for you a detailed explanation of how to do it within 24 hours of your reply. Thank you either way for watching my video.
Hi again! Ok, I think I figured this out - but it’s not easy. When you make the top 350 pinch twists, make them a little smaller and more rounded - that’s because the one facing forward will eventually be turned so that it is vertical (as seen in the picture). You create the wand as usual from there all the way down to the bottom of the 350 - and then the changes come at the attachment of the linked 260s that form the heart shape on top.
(PART 2) After sliding the linked centers into the 350 pinch twist juncture as shown in video, you are going to make a 260 pinch twist on either side. Since the nozzle is jammed in between other balloons you have to pull back on the 260 a bit to make a bubble and pinch it into the twist shape you want. (You will notice these 260 pinch twists on either side of the white 350 pinch twist in pic.) Form your large rounded 260 pinch twist, lock it into the center afterward by wrapping the balloon around the 350 pinch twist, then create one on the other side, then lock that one in as well. From there, the design is finished exactly the same way. I made it sound complicated, but you basically just have to invert the 350 pinch twist and make a 260 pinch twist on either side before forming the heart shape. I hope this helped and I will always be happy to try and answer any questions you have.
+rageyb The Eeyore tutorial is coming next week, and although I am no 'Michael Floyd', I will do the best that I can with an original design. Thanks for all the support! I will go back to some décor after Eeyore, The Extreme Rainbow Mohawk Hat, and the skateboard.
Sailor Moon vibes! Love it
😆 wow, this one was made a long time ago! You are so sweet for commenting on so many of my vids, Rydia. I love you. ❤️💕
QUICK TIP: if you want the 260 heart to look complete, add a scrap 260 pinch twist right under that top 350 pinch twist, forming the "point' on the heart's bottom.
Great looking wand!
+chunksmyhero thank you!
this is a brilliant design sage. so original also.
+john callaghan Thanks a lot, john!
+Balloon Sage no problem sage keep up the great work
Soooooooooooo stinking cute !!!!!!!!!!!!!!!!!!!!!
Love these Sage! These are awesome and little girls will go crazy for these :)
+Ask Me For A Balloon thank you! I am thinking of doing a linework version as well. we both have been busy and not mentioning eachother's channels, but we both make so many freakin vids that we can sort it out over the next week or so, as you will be heavily mentioned in the upcoming décor vids.
Balloon Sage Sounds good. Just got in from a twisting gig, another one to go to again soon!
Nice .... Bhai comments box me jabab jarur dena sirf model he dekhate hai koi jhalar nahi aata hai kya usko ham dekhna chahte hai
Nice one. I suck at wands.
+Mr. Boma's Balloons lol. thanks Mr. Boma!
+Mr. Boma's Balloons I pretty much suck at anything with a face, hence inanimate objects being the subject of the majority of vids I do.
+Balloon Sage - Did you see my koala design? You're usually one of the first to comment, but not this time. My views have been unusually low on it… I suspect RUclips maybe didn't notify my subscribers.
No, of course I would have right away! Will watch now.
+Mr. Boma's Balloons I subscribed to your channel long ago, but I don't remember RUclips ever sending me a notification of your videos.
One of the balloon heart wands are very similar to Setsuna Meioh/Sailor Pluto heart wand of Sailor Moon
Nice!
Thanks Iris!
You are welcome!
Can you show us how you did the first one. I like the top better.
Hi! I’m sorry, but I made this video quite a while ago and would have to watch it again to even learn how to make the entire design. You are right - the other is better, and I think I taught the second version because it was more stable. I will make you a deal, though. If you reply to this comment I will personally relearn this design and then figure out the top that you want. I will then type up for you a detailed explanation of how to do it within 24 hours of your reply. Thank you either way for watching my video.
@@BalloonSage Thank you so much!!! I really appreciate that.
Ok, great. I will figure it out and get back to you.
Hi again! Ok, I think I figured this out - but it’s not easy. When you make the top 350 pinch twists, make them a little smaller and more rounded - that’s because the one facing forward will eventually be turned so that it is vertical (as seen in the picture). You create the wand as usual from there all the way down to the bottom of the 350 - and then the changes come at the attachment of the linked 260s that form the heart shape on top.
(PART 2) After sliding the linked centers into the 350 pinch twist juncture as shown in video, you are going to make a 260 pinch twist on either side. Since the nozzle is jammed in between other balloons you have to pull back on the 260 a bit to make a bubble and pinch it into the twist shape you want. (You will notice these 260 pinch twists on either side of the white 350 pinch twist in pic.) Form your large rounded 260 pinch twist, lock it into the center afterward by wrapping the balloon around the 350 pinch twist, then create one on the other side, then lock that one in as well. From there, the design is finished exactly the same way. I made it sound complicated, but you basically just have to invert the 350 pinch twist and make a 260 pinch twist on either side before forming the heart shape. I hope this helped and I will always be happy to try and answer any questions you have.
Love it
+David Cook Thank you David!
Yeah im 1st I love how you show the item 1st and this is so lovely any little girl would love this :D
+rageyb The Eeyore tutorial is coming next week, and although I am no 'Michael Floyd', I will do the best that I can with an original design. Thanks for all the support! I will go back to some décor after Eeyore, The Extreme Rainbow Mohawk Hat, and the skateboard.
+rageyb Totally agree with you. I hate it when a tutorial starts and you have no idea where you're going! Sage has the best tutorials!
I try to make sure every detail is covered. Thanks for watching, friends.
Goddamn that strawberry twist.
I know! haha. It is diabolical. Thanks for watching my tutorial.