Nice easy build, thanks, I think this is the best video I have seen on a preamp the distortion is a bonus you describe it really well. I am from London, UK
Thank you friend, but please, after you type the dot mark you have to put a space so that it doesn't become like a link that will automatically go to spam.
Hey dude, i liked your simple form to construct this Distortion Padal, congratulations! I'm from Brazil and i didnt see something like that here. |..I. Let's rock!!
@@moristo you use 47 pf capacitor , 68 nf capacitor and 560k ohm resistor I have 56 pf instead of 47 pf , 78 nf instead of 68 nf and 500k ohm insteak of 560k ohm Is it ok? or there will be a problem?
Dude, thats cool you did that, but can you please tell me how you know just what transistors and caps a diodes and such along with the proper values AND where they should be placed in the curcuit to achieve the desired results? Its ok if you just copied a schematic you found, but if this is straight out of your head, where did you gain this knowledge? Did you go to school, or read a book, or something? I can copy stuff already, but i dont understand the WHY (am i using this part and value here and not there) and HOW (do I know this is what is needed to get my desired result) of it all! Thats the part i need to learn! Thanks for any insight. ✌️
Thank you for comment. First of all, you have to know how each electronic component works, you have to really know it so that it feels like flowing in your blood. If it's already like that then you will easily understand every electronic circuit.
It will be a part of the smart technology (auto-mute) in the futures Guitar's amplifiers. So till today you should turn down the Guitar's amplifier volume before you unplugging the jack (not volume on guitar).
Dalam video ini saya menggunakan pickup pasif, untuk pickup aktif juga bisa dengan mengurangi volume output pickup aktif yang telah di boosting agar rangkaian preamp dalam video ini tidak over input.
Sorry, I don't have the schematic yet, but you can draw it your own while watching, feel free to use play/pause button when you catch something to draw.
haha, oke maaf bro saya tak punya skemanya, waktu dulu saya hanya pelajari cara kerjanya dan liat skema dasarnya dan itu tertanam baik dalam otak saya sehingga sebelum saya buat video ini saya mencoba membuat terlebih dahulu baru kemudian saya buat video ini.
Majority of my video is just my research experiment result, so commonly the schematic diagram just in my brain. If you really needed the circuit diagram you can draw it your self while watching and use play/pause button to catch something to draw. Thank you for watching my friend.
Kalau tak berhasil membuatnya maka sudah pasti ada 2 persoalan: (1) Rangkaian yang kamu buat ada kesalahan. (2) Komponen yang kamu pakai palsu atau rusak/jebol/putus karena pernah ada kesalahan sebelumnya.
Nice easy build, thanks, I think this is the best video I have seen on a preamp the distortion is a bonus you describe it really well. I am from London, UK
I am so glad your appreciation for my video, thank you so much.
Lets rock the love, and this is love from Indonesia.
i've watched it twice and i really want to do this on my own, with these tutorial, i can make a diagram thru this.... thanks dude...
YAW dude.
THAT'S AMAZING!!! HOW DID YOU MAKE IT SOUND LIKE A DOG BARKING?!?!? GENIUS!!
Just like what you see in the video.
And you have to listen the real test in a few seconds before the video ends.
You are a good teacher
But I'm not a teacher bro.
Thanks a lot ..a big salute for u calm n enthu teachin.,well done
Thank you.
I will try it..thanks for making this vid.love u 💗
Thank you friend, but please, after you type the dot mark you have to put a space so that it doesn't become like a link that will automatically go to spam.
can i connect this preamp to TDA2030A amplifier(10W) ?
Any audio amplifier with line in.
Can I use another transistor instead of C1815?
Sure, you can use any other TUN (Transistor Universal NPN) but you have to pay attention to the EBC pins position.
@@moristo Is the Aluminium foil necessary?
It is needed to reduce noise, but you can replace it with other metal materials even if it is in plate.
Hey dude, i liked your simple form to construct this Distortion Padal, congratulations!
I'm from Brazil and i didnt see something like that here.
|..I.
Let's rock!!
Ok dude, enjoy.
brother can i send you pictures and video ?
the distortion part is not working
where can i send you?
Just upload in your RUclips, then I'll going to see that.
muy bonito :) nice work .. it doesnt even sound terrible :) i imagine with a decent power amp and speaker it is as good as any pedal :)
an expert guitar player will know the good settings, unfortunately I'm not a guitar player.
this is preamp so do we need to connect it to amplifier?
Yes.
i have 56 pf instead of 47 pf and 78 nf instead of 68 nf and 500k ohm instead of 500 ohm
is it ok?
More details please!
@@moristo you use 47 pf capacitor , 68 nf capacitor and 560k ohm resistor
I have 56 pf instead of 47 pf , 78 nf instead of 68 nf and 500k ohm insteak of 560k ohm
Is it ok? or there will be a problem?
56pF(47pF), 78nF(68nF), 500k(560k), it's ok, no problem.
A distortion regulator potentiometer?
Please more clear question.
Dude, thats cool you did that, but can you please tell me how you know just what transistors and caps a diodes and such along with the proper values AND where they should be placed in the curcuit to achieve the desired results?
Its ok if you just copied a schematic you found, but if this is straight out of your head, where did you gain this knowledge?
Did you go to school, or read a book, or something?
I can copy stuff already, but i dont understand the WHY (am i using this part and value here and not there) and HOW (do I know this is what is needed to get my desired result) of it all!
Thats the part i need to learn!
Thanks for any insight.
✌️
Thank you for comment.
First of all, you have to know how each electronic component works, you have to really know it so that it feels like flowing in your blood.
If it's already like that then you will easily understand every electronic circuit.
What voltage do you apply to the circuit
You can use 9v up to 15v dc.
Ampere??
at least 0.35 ampere
Would you make a video on a kill switch that can mute the guitar when unplugged and not caused a pop noise?
It will be a part of the smart technology (auto-mute) in the futures Guitar's amplifiers.
So till today you should turn down the Guitar's amplifier volume before you unplugging the jack (not volume on guitar).
I built this but when I connect to amplifier, the normal sound is good but the distortion sound is very very low
Pls help
You have to pay attention to the components one by one, a small mistake will not get desired result.
It's not working when I plug it directly in speaker
Is it normal?@@moristo
Please use active speakers.
Thank you for the video
YAW
bang bisa di aplikasi sama wah baby cry muantap.... Buat tutorial bang preamp+distorsi+wah... Tambah muantap
Itu ada komentar katanya efek gitar saya ini unik, ada efek seperti suara gonggongan anjing, xixixixixixixi.
Does this work on acoustic guitar
Sure, that acoustic guitar with pick-up
Can I use different transistors like c945? Or other transistors than a c1815?
Hi there, you can use any NPN transistors, but pay attention to the EBC pins position.
@@moristo any transistor value as long as it's an npn? Okay.. I will try! 👍
Yes, universal NPN transistors
do have some mic tube project?
I would if I had some Triode tubes.
how many volts input?
Please watch carefully, you'll know it.
Skemanya cari dimana ,bos?
Yang ini hasil riset saya sendiri masbro setelah dulu saya pernah memperbaiki Guitar amplifier.
kapasitor 68nf sama 100nf gk ada e bang bisa diganti?
68nF bisa ganti 0.068uF, yang 100nF bisa ganti 0.1uF.
@@moristo gak ada semua e bang
@@firdeus2691 beli online
build this yesterday and it works ....
nice, good job.
@@moristo next do an eq stomp box ... my e.guitar doesn't have tone knob🤣
You can see in my video "Electric Guitar Restoration" how the volume and tone guitar controls connection, so you can make your own one.
Hadir pertama kali salam kenal dari saya SUPRIADI MC
Salam kenal juga ya masbro.
bisaan c mas bahasa inggris na uy..kereen..uwing mah ukur boga konci inggrisna weh di imah teh..bahasa inggris na mah balelol🤣🤣🤣
uwing mah kuring maksakan diri🤣🤣
Resistor nya 570 k di ganti sama resistor yang 470 apa bisa bang
Kalau 470K masih oke.
@@moristo oke ... Nanti tanya lagi bang
@@moristo kalau dari capasitor bang yang 100nf di ganti sama 2A393J apakah bisa bang
Capasitor kramik yang 47pf di ganti sama 66pf bisa kah
100nF ke 39nF terlalu jauh bedanya, masalah bunyi akan tetap bunyi, tetapi banyak frequency terbuang....... kalau ada 66pF silahkan di coba.
Led vu kapan lg om?
Sabar, semua ada waktunya, masa itu-itu terus, nanti kamu cepat bosan.
My everything just same as you but why don't have any sound come out?
1st please tell me what transistors code that you are use.
Same here brother, just work ones and stopped
Did it letter work?
Please don't use fake electronic components.
Pickup pasif bisa ga bos
Dalam video ini saya menggunakan pickup pasif, untuk pickup aktif juga bisa dengan mengurangi volume output pickup aktif yang telah di boosting agar rangkaian preamp dalam video ini tidak over input.
@@moristo ok trima kasih info nya
@@amatiranstyle921 sama-sama terima kasih.
Ini rangkaian fuzz bukan
Boleh tau skemanya
@AhmadFauzi-cd2ts Silahkan simak video cara buatnya, skemanya masih dalam kepala saya saja, belum ada kesempatan desain.
Bang ko yang saya pas pindah ke distorsi nya kenceng banget ya suara nya ga seimbang sama pas clean
itulah fungsi potensio masing-masing.
@@moristo jadi harus tambah potensio? Soalnya 1 potebsio
Sesuai yang dalam video ini.
Circuit diagram?
Sorry, I don't have the schematic yet, but you can draw it your own while watching, feel free to use play/pause button when you catch something to draw.
Joss❤
Oke om.. Joss❤
Can you show to me schematic
Sorry I don't have the schematic. You can draw it yourself, use play/pause button when catch something to draw.
Wakakak ternyata sama-sama dari konoha.
@@moristowkkwkw
haha, oke maaf bro saya tak punya skemanya, waktu dulu saya hanya pelajari cara kerjanya dan liat skema dasarnya dan itu tertanam baik dalam otak saya sehingga sebelum saya buat video ini saya mencoba membuat terlebih dahulu baru kemudian saya buat video ini.
Buat efek dsp rivebs
Ada beberapa rangkaian yang masuk dalam daftar rencana saya untuk video kedepan yang berkaiatan dengan Guitar, termasuk efek reverb guitar.
Bahan bahan nya apa aja bisa tolong di tulis biar enak belanja nya soal nya saya tidak tau nama nama komponen nya
Saat masing-masing part di tampilkan bersamaan dengan keterangan part berupa text dalam video.
@@moristo kurang jelas mas ...tk simak e maneng
@@YhuggiAnto-dj2su tekan tombol pause video YT lalu catat, ntar cari referensi lebih detail di Google dari catatan itu.
Thank you sir for this, please where is diagram ?
Majority of my video is just my research experiment result, so commonly the schematic diagram just in my brain.
If you really needed the circuit diagram you can draw it your self while watching and use play/pause button to catch something to draw.
Thank you for watching my friend.
la guitarra estaba desafinada pero suena bien tu circuito
Si, no soy un guitarrista profesional. Gracias, espero que te sea de utilidad.
You must add a ground
That's already.
Add on where bro?
I mean where we should add a ground?
You can see the aluminum foil as an artificial ground.
Why would you even add ground.
Itu kapasitor keramik bukan 47 pf , tp klo liat Poto anda 473 berarti 47nf mas bro..
Itu tulisannya 47J dalam hal ini J bermakna tegangan kerja maksimal kapasitor tsb, btw perasaan tidak ada Poto dalam video saya ini😃
Ini rangkaian fuzz bukan
Boleh tau skemanya
@@AhmadFauzi-cd2ts Maaf, skemanya belum ada. Silahkan gambar sendiri skemanya sembari nonton.
Thank yuo elec guita ok
YAW
Tolong bang share bahan2 nya
ada dalam video, silahkan di pause video saat setiap menapilkan teks data komponen untuk dicatat.
Try again please USB Hub Cabell guitar amplifier please try again❤
If you want to record guitar playing into the computer you just need to connect the effect output into the mic socket in your computer.
No computer bro 😁🙈
New guitar effect try again bro ♥️
Only easy guitar effect bro please ♥️💖💖
Do you mean the USB is just power supply source?
Capasitor hijau itu semua tipe gakpapa apa GK boleh
semua type kapasitor boleh, asalkan nilainya sama
Give me please diagram
Sorry I don't have it yet, but you can draw it yourself while watching, use play/pause button to catch something for details.
Keren
Terima kasih papanya Inky, GBU + families.
👍🏻
nyimak bos
Silahkan 👍
Kok gk bisa bang
Kalau tak berhasil membuatnya maka sudah pasti ada 2 persoalan: (1) Rangkaian yang kamu buat ada kesalahan. (2) Komponen yang kamu pakai palsu atau rusak/jebol/putus karena pernah ada kesalahan sebelumnya.
@@moristo oallh oke
Merangkai elektronik tidak boleh ada kesalahan sekecilpun pada komponen-komponen semikonduktor.
👍
Thanks.