Love Love Love Your approach to editing an content.straight to the point! NO EXCESSIVE TALKING NO LOUD MUSIC you show the project ,then in 5 minutes or les with editing you dhow how to build! I believe most of US , either DIYers or full time craftsman can build most stuff just by looking at it an taking a couple measurements. We dont like to ask for HELP OR READ DIRECTIONS ! I hold my breath every comment i read asking about plans an they truly cant look at it an just build it.
I would like to say I’ve been subscribed for a while and enjoy the content. I think some of your posts are great and could benefit from longer video format, just my opinion. Keep up the great content
A persons skill/workmanship, knowledge and creativity is judged or valued by the way he handles his tools, and the way he uses and preserves the tools ...
I like your design. You solved the problem of what to do with that space to the right of the fence. I had mine go around the entire fence assembly and couldn’t figure out how to deal with that space. So I will copy yours. What are the knobs on the hold down clamps for?
How to make a simple job really complicated, all you need is a router, a shamfer edge bearing bit, a non-slip mat such as a shelf liner fabric, and a little bit of skill and dexterity
Thank you for the video. The grain directions of the wood need to be rotated 90 degrees. Vertical wood grains will be better than horizontal ones. 영상을 보내주셔서 감사합니다. 나무결 방향을 90도 회전시켜야 합니다. 수평 나뭇결보다 수직 나뭇결이 더 좋습니다.
Love
Love
Love
Your approach to editing an content.straight to the point!
NO EXCESSIVE TALKING
NO LOUD MUSIC
you show the project ,then in 5 minutes or les with editing you dhow how to build!
I believe most of US , either DIYers or full time craftsman can build most stuff just by looking at it an taking a couple measurements.
We dont like to ask for HELP OR READ DIRECTIONS !
I hold my breath every comment i read asking about plans an they truly cant look at it an just build it.
Thats really, really cool made! A lot of our Jigs seem to really work well and are well thought! Thank you for sharing!
Handy jig! I notice that your fence got a little too close to the blade once. Maybe you can make an auxiliary fence to protect it.
I have this jig, but never thought to mount a clamp on it. Thanks for sharing.
I would like to say I’ve been subscribed for a while and enjoy the content. I think some of your posts are great and could benefit from longer video format, just my opinion. Keep up the great content
Well done, liked the idea and the execution. Can imagine a cabinet door with those panels/tiles on. Beautiful 👏 👏
A persons skill/workmanship, knowledge and creativity is judged or valued by the way he handles his tools, and the way he uses and preserves the tools ...
My thumb would of loved that jig before it wss too late 😂 at least it wasn't the hand 👍 great work
Safety got me,great job
I like your design. You solved the problem of what to do with that space to the right of the fence. I had mine go around the entire fence assembly and couldn’t figure out how to deal with that space. So I will copy yours. What are the knobs on the hold down clamps for?
Toggle clamp 😊🛠️🍀
I love your stuff! Thank you.
How to make a simple job really complicated, all you need is a router, a shamfer edge bearing bit, a non-slip mat such as a shelf liner fabric, and a little bit of skill and dexterity
I like all of this, way to go thank you!
Eres un genio 🤯🤯
Great jig. Lovely work.
Все можно придумать, кроме время потраченное на это!
See how a need makes good safe ideas come to fruition ❤️
It sure helps when you have all the right equipment AND know-how !!
How many times has your wife wished that about you….
Excellent!❤
Designwise, why did you make that vertical piece round on top and that high for? I don’t get it.
Very nice jig and a shaker panel
Good jig. Great video.
That's brilliant❗️
Great tip! Thank you for sharing!
Esta buena la idea pero no sirve para hacer tableros mas grandes
Their wood is very soft, and on average our wood is iron wood
Great idea 💡💯
Very helpful
Отличный плиткорез👍👍👍👍
Amei amei
Great job. Did you make the feather board too?
Yes. I did it… you can find my channel. Thank you 😊 Have a nice time 🍀
bien jugado!
Love this!
Nice work
Very nice
Well done👍
꿀팁 감사합니다
😊🍀
Very cool!
I love it! Can it be use to split wood into half?
Yes!… I will upload about it 🍀
@@BStarCrafts1 thankyou so much sir
I like that.
Látom a steller már kapott az élettől 😁
Amazing 👍
Are you saying they have heavier loads than us? Fighting Words😂
You make this jig because you kept cutting your fence?
Gotta go....
Gotta make!
muito bom
Quantos graus foi usado na serra?
30‘
I feel like a router would do the same
Also can be done with a router….
Nice
Most of your time as new woodworker is taken up making jigs, if not is doing dangerous or the longest way possible things.
Alle haben diese Macke im Zaun :D wie schaffen die Helden das :D
Good jig
What is that stopper called please 🙏 😮
Stopper? Leather board… 😊🍀
Wenn ich das Hochkantsägen sehe, bekomme ich einen Hals. Tischfräse und Abplattfräser, und die Finger bleiben dran. Unglaublich.
Nice! RWB
This pleases me
What blade are you running in your table saw?
Made in Korea… No brand
Knobs could do it with less.
❤
🔥🔥🔥🔥
Надо ещё ускорить видео.
я это делаю без всяких приспособлений я столяр
𝕾𝖚𝖕𝖊𝖗✌️👷♂️𝕻𝖔𝖟𝖉𝖗𝖆𝖜𝖎𝖆𝖒
🙏🏻
Yo gap
Thank you for the video. The grain directions of the wood need to be rotated 90 degrees. Vertical wood grains will be better than horizontal ones.
영상을 보내주셔서 감사합니다. 나무결 방향을 90도 회전시켜야 합니다. 수평 나뭇결보다 수직 나뭇결이 더 좋습니다.
🎉🎉🎉🎉
Me gusta el perrito
Meh
Как называется то коричневое дерево?
Merbau wood…💚🍀😊