It would be interesting to see this shooting with a modified mag allowing co2 but through a tiny reg giving about 200 to 220psi. If i get one i may try making one🤔 Great video.
Hello? I was very impressed by your video. I have a question, so I ask you. Are you sure that the Umarex PSG-1 is equipped with the Tokyo Marui replica Scope? I'm also waiting for PSG-1 to be delivered, and I'm very curious if I can fit TM's scope.
Based on the design of the magazine, it is possible. However, even if you can make it not leak. The 5 round magaizinewill have a very small chamber for the liquidized green gas to turn into gas, and therefore hinder the performance (you will see lots of white "smoke" when shooting)
Yes. However i project that it will suck because there wont be enough room for either the gas reserve or vaporization, as the mechanisms takes up most of the guts in a 5 round length mag. I think the optimal solution is to rig a CO2 canister onto the cut down mag.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
太專業了吧~馬上知道問題出在哪還有要怎麼改裝
感謝支持^_^
其實以前玩過sf這個遊戲的人對這把槍都有特殊的情懷
还有输错名字的frf2
@@sonnylaw7163 還有SVD
陳憲叡 svd？好像比较后期才出，只记得psg1拉栓的声音刷啦，像两个塑料件摩擦
@@sonnylaw7163 不是哦SVD一開始就有了
商城就要10萬遊戲幣買的
可以去看看
陳憲叡 大陆服好像没，而且已经倒闭很久了哈哈哈
每次都有看測試影片，貴店的抗寒套件真太屌啦！👍👍👍👍
感謝支持🙏
請問有再幫人改裝升級嗎?想了解!謝謝
請問更換mp5復進簧是mp5原廠復進簧還是we mp5改裝的復進簧
精密管拆氣閥帥😂
真是眼尖^_^
It would be interesting to see this shooting with a modified mag allowing co2 but through a tiny reg giving about 200 to 220psi.
If i get one i may try making one🤔
Great video.
小弟對於大杰使用的拆氣閥工具感興趣
哈！被發現^_^
@@AMGJAY 可以詳細一下嗎？還是哪裡買的？
@@Specter0338 我拿原廠手槍內管自己加工的^_^
Hello? I was very impressed by your video. I have a question, so I ask you. Are you sure that the Umarex PSG-1 is equipped with the Tokyo Marui replica Scope? I'm also waiting for PSG-1 to be delivered, and I'm very curious if I can fit TM's scope.
The VFC/UMAREX PSG-1 comes with a scope mount that has pic rail on top.
我想請教一下大杰，在更換完抗寒擊鎚簧後會影響到扳機扣壓的磅數嗎？
理論上來説影響扣壓磅數的是扳機簧。 如果硬要説的話，軟質的擊錘簧可以非常輕微的減輕司牙之間的摩擦力，因此降低一點點的磅數，但是微乎其微，可以忽略不計。
@@Bana-Nami 內行！^_^
你好 我有一些GBB問題想請教 可以方便加LiNe嗎
你好！LINE ID： bigj821
能否評價一下VFC跟MARUI的PSG-1槍身質感是否有什麼差異?
VFC鋼製 VS MARUI 塑膠 ^_^
Did you think we can modify the standard mag to short mag?
Based on the design of the magazine, it is possible. However, even if you can make it not leak. The 5 round magaizinewill have a very small chamber for the liquidized green gas to turn into gas, and therefore hinder the performance (you will see lots of white "smoke" when shooting)
Yes. However i project that it will suck because there wont be enough room for either the gas reserve or vaporization, as the mechanisms takes up most of the guts in a 5 round length mag.
I think the optimal solution is to rig a CO2 canister onto the cut down mag.
psg1 的飛標和飛機和 mp5 v2 ，可以共用？
日後會拍影片介紹
各位大大，vfc psg-1 和 we m14推哪一把？
這兩把都不咋地，會改到你叫爸爸
@@無-d4l 硬要比的話…
@@塑膠標靶 M14 吧，lv2, lv3 很棒 (?
@@waluwa3929 我覺得大杰可以拍一部介紹M14的影片
@@塑膠標靶 我遲早會拍的！因為它是我當兵的回憶^_^ 只是太愛它,所以想放後面點拍。
謝謝 開 弾倉 ！！
目前都沒看人開過,所以我想應該有人需要看^_^
初速最高多少
這把我記得真槍重量有8.1公斤
不知道這個HK真槍授權的槍重量有沒有差別
这把5.4公斤
使用了amg氣閥沒有改善
只換氣閥當然沒用，其他也要更換
打過sf都想買
果然跟我想的一樣
還好。沒入手
怎麼說？
@@tw2181
網上應該已經有視頻或評論
初速差異100-150
可能是 槍機內有油 或 其他原因⋯
質感 g3 還比較好
握把 有的網站資訊 還是木握把⋯
還期待一下 結果是 仿木
更細的還有焊接魚鱗紋 刻字
同類型 我推 MARUI 89式
@@stu575359 這把影片內初速很穩阿? 雖然都很低?
@@CKshouta
影片內有⋯請再看一次
6:06
@@stu575359 可能要靠穩流飛鏢，也有可能像大傑説的，撞針連桿會導致撞擊氣閥的力度不穩定。
沒 短 彈 匣 ㄚ ~ ~ ~
可 我 比 較 喜 歡 MSG-90
沒短匣真可惜....
哎，800美元都可以买到ar-15了，看来台湾民主还有很大进步空间啊
跟民主有什麼關係？
@@jinia0815 想到800美元只能打GBB，还是心有不甘啊
但，世界上有多少國家可以買真槍的😆
真槍子彈太貴辣！
@@jinia0815 其實蠻多的😂