Wrong. You always connect the cranks first while your shutter and cover are in place then connect your guide tube after last exposure and survey remove guide tube and close cover before removing cranks.
@@JohnKnapp That was for 660 projectors. 880 projectors already developed to remove crack unit first which will be safer and you'll be sure that the source is returned to it's safe position.
For 880 projectors you have to remove first the cranck unit after that the guide tube which you just did the opposite.
Simply following the procedure taught to me. If you have any discrepancies bring it up with the RT department at the technical college stated above.
Wrong. You always connect the cranks first while your shutter and cover are in place then connect your guide tube after last exposure and survey remove guide tube and close cover before removing cranks.
@@JohnKnapp That was for 660 projectors. 880 projectors already developed to remove crack unit first which will be safer and you'll be sure that the source is returned to it's safe position.
@@JohnKnapp you'll be sure that the source returned back before you survey the guide tube before removing it
@@SalivaHole Thanks Kyle McDonald
Read manual! Missed several checks(flex test, 6" and 12" length checks, cables and labels)....too many too list..also all positions are just No-Go
Y’all fucked that all the way up